Wiadomości

Mina Ro
Just a note, Vallejo pastel blue is a very good match for the KA-27 interior after researching the real cockpit and experimenting with many grey blue colors from Vallejo. I would recommend Vallejo 70.901. This picture was taken to show the color on the cockpit floor. I am still waiting for the aftermarket cockpit seats before I go any further in my build.

Mr D
Brilliant 👍👍 l like Velejo paints, l purchased the big main colours box and can mix almost any colour out of them.
The white and yellow is only letdown as very low in pigment!!
I purchase AK Intense white and yellow and they .. knock it out the park.. Brilliant.
I'm building a HB at min and it's not giving me accurate paint colours! Also some areas n parts no paint colour mentioned! Good old internet to the rescue.
Good luck with it..nice project 👍👍

Mina Ro
Yeah thats the one thing I dislike about the Chinese kits, very little paint callouts and no data on the units in the decal options offered. You really have to dig real data to find out and while it can be fun and a learning lesson. I bet a lot of modelers find it annoying. These companies need to do better for the price of kits these days.

Ben M
👀 thinking of building my first helicopter soon

Juergen Klinglhuber
taking a seat....

Nicolas
Following

Robert Podkoński
Me 2!

Marcin Dudek
👀 3rd

Dave Burgess
So now the FUN begins! Turning the P-39 wing into a (laminar flow) P-76 wing! I found a cheap P-51 kit ($13 CAD) to sacrifice. I'll need to cut out and fill in the P-51 landing gear wells, chop off the wingtips to reduce the wing span to ~36 scale feet (35'10"), cut out the P-39's gear wells, chop holes in the P-51's wings to mount the P-39 gear wells, and remove the leading and trailing edges of the P-39 wing root to mate up with the P-51 wing so it matched the P-39 fuselage. Also because the gear wells in the '39 are further back than the P-51, and the flaps on the P-51 are molded as one piece not two, the rear of the gear wells extends into the flap space, so I'll have to toss the flaps and fill that space with sheet styrene. Piece of cake! (Yeah, right!)

Guy Rump
Following as well! 👍

Dave Burgess
Step 1: Chop both the P-39 and P-51 lower wing into the component parts. I want to keep the P-39 wheel wells, and rear and forward centre so they will mate to the P-39 fuselage

Dave Burgess
Step 2: I re-sorted the wing components to prepare assembling the XP-39E/P-76 wing.

Dave Burgess
Step 3: glue all the bits together; re-invorced with styrene strip

Dave Burgess
Step 4: a WHOLE BUNCH of puttying! in retrospect I probably didn't need to do so much disassembling of the P-39 wing, but I wasn't sure where it was going at the time.

Dave Burgess
Step 5: Now I have to chop the tail off the P-39 and fit on the P-51 tail. I think this will probably be the easiest approach here. I also have to lengthen the fuselage by 24 inches or 24/72 - 1/3". Fortunately the rear and front of the wing bottom match up well to the fuselage wing fillets, suggesting to me that my wing mods were pretty accurate.

Robert Podkoński
Photos #4-6 terrified me... 😉 Great job, Dave!

Dave Burgess
Thanks, Robert. Y'know, the first time I decided to to a mod that required me to cut up a new kit, that was EXACTLY my reaction. I was terrified that I was going to destroy a perfectly good kit and have to throw it away. And that was only one kit - this one required me to cut up TWO!. Several decades of model building and multiple mods have given me the confidence to do these mods, knowing that while it may look a hot mess when it's in progress, with a little sheet styrene and some putty, I can pull it off, and most people wouldn't be the wiser.

Villiers de Vos
Very nice work on this little gem.

Alec K
Cheers friends! After the Neptune, I needed a palette cleanser build, so I reached for a long-neglected kit from SH I promised I would build too long ago. It's a OOB (well, 98%ish) and a lightning build by my standards. Hope you enjoy, it truly is an excellent kit.

Jakub Fiala
Ha, Alec and OOB project! Who would believe this 🙂
Very nice work so far, mate. I built a bigger sister of her ( Eduard bf 109E-7) and i remember, that put those parts of fuselage nose together is not a piece of cake.

Alec K
Čau Jakube, well not many, but as this is already done I can wouch for the veracity of my claim 😉
As to the kit: the nose assembly was indeed a bit of a puzzle, but very doable. I wonder how closely SH and Eduard cooperated on this, the kit feels very Edíkovskej. Overall, a joy to put together. Cheers!

TH SCALE MODELS (Thomas Haberl)
Nice topic and really convincing progress Alec - taking a seat ☺️

Miguel Vaquero
Trying something completely new for me this time around. I found this resin model of Grogu on the internet, and since my girlfriend loved The Mandalorian, and of course, Grogu, I decided I wanted to surprise her with this figure painted by my self.

It's my first time painting a figure so let's see how it goes

Ben M
👀

Miguel Vaquero
All base colors applied on the pram and on Grogu. Next step some washes for shadows and highlights

Ian Doody
As I'm basically an old man now, some old man modelling. 1/24 ancient 80s Takara VOTOMS Scopedog, updated by Wave. The legs and feet I'm happy with, but I'm adding card to the bottom of the body, to raise its waist, and I'll be shortening the arms slightly too.

Ian Doody
Rusty old death tub. Love the fact that VOTOMS AT's are basically futuristic Sherman Tanks, and as vulnerable as them. Death traps.

Ian Doody
Coming along nice and rustily, finally getting this done after ten years in the box. Wish I'd picked up more 1/24 VOTOMS kits when I had the chance, luckily I've got two 1/20's and about eleven 1/35 AT's to still make.

Ducksnuts
That weathering/rust looks amazing.

Ian Doody
Getting there, Rusty old one man tank look. This is just the first layer of paint on the primer. Filled up the voids on top of the knees, started to add the arms, cast texture made with putty on the shoulder pads. Finished inside of cockpit lid. Old school fun.

Ian Doody
Not a fat lot done today really. Built and slightly shortened both arms, made the hands, gun. Made so the right hand has proper gun finger control. Waiting for parts to dry.

CaptGPF
Ducksnuts is right - amazing weathering!

Ian Doody
Basic paint up finished, still working on the head, and gun.

Ian Doody
Melquian Drop Forces test paint. Going for a beaten up look. Trying to do it as fast as possible, and not go over the top, I've got a lot of other stuff to make.

Mr D
Looking 👍👍 great.
Nice paint shade on the head/helmet.
Nice job👌

Ian Doody
Moving slowly down the 1/24 WAVE/Takara Scopedogs chassis. Starting to look quite good. The slight height boost from added plastic card, makes it look better proportioned, quite pleased with that.