Wiadomości

Villiers de Vos
Nicely organized. Now for the fun part.

MS K
Yeah, I think this is the most enjoyable time 🙂

Nigel Chapman
Started the preliminary mock up for my next project, the Matchbox inspired VW Golf TRAR - TRuck chassis with cAR body.
The Toyota chassis requires just a short section to be removed so should just fit nicely within the body.
The engine is already moulded to the chassis so I will use this and disguise the engine bay to cover the gap.
Not sure about enlarging the wheel arches or keep them stock.

Bozzer
I've definitely got to change my drink. I can't envisage things like you do, let alone build them?
I'm hanging around for this, in the hope that something triggers my remaining grey cell??
Carry on, Mr Nigel 🙂

Nigel Chapman
3/4 inch taken out of the chassis then glued together and hey presto a VW Trar. It is posed with the Toyota kit wheels and tyres but not sure if I will use them.

Sergej I
Watching! Top riveting there, looks very exact and well cleaned after 👍

Tony Tonov
Great start, taking a seat 👍

Harald Besold
Impressive start! I'm really looking forward to the following photos.

Neil Patrick
Following. for sure. This looks like it will be epic!

DerMattes
Following 👍

Dave Flitton
Watching!!!!

Romain Sablou
Thank you ! Welcome aboard the Milk Run Special 😉

gorby
Remarkable work so far! Very impressive riveting.

Alec K
Taking a seat in the classroom 👍. What is happening in picture 8?

Живко Джаков
Following

Romain Sablou
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again

Alberto
Very promising start, I'm in!

Fabien
Wow impressionnant. super beau boulot

Alec K
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍

Guy Rump
Looking great, following. 👍

Romain Sablou
Thanks mates !

Et merci Fabien 🙂

Eric Thornton
+1 following

Guy Rump
Watching. 👍

Thomas Bischoff
watching too 👍

Christoph Kunz
Awesome! 👍
Taking also a seat.

Nicolas
Great work so far, following

Gary Victory
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.

Romain Sablou
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌

Jakub Fiala
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.

Romain Sablou
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌

Dietmar Bogatzki
Fantastic riveting job and also the wash 👍

Alec K
Outstanding progress 👍

Romain Sablou
Thanks guys, glad to finally paint something after all this preliminary work !

Pietro De Angelis
Impressive work, congrats!

Bernhard Schrock
Great work especially you very exactly riveting job. Chapeau.

Jakub Fiala
Great progress, beautiful details!

Alec K
Superb work all around 👍

Mike Siemers
I'm in, can't wait to see the finished kit. Great job on the interior.

Romain Sablou
Thank you all for following this project 🙂

CaptGPF
Same with others - looking great!

Finn
Following

Tzonglin Wu
It is so incredible. Following.

Spanjaard
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!

Romain Sablou
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏

Alex Rakhimgulov
Outstanding project!

Dave
Beautiful details, this is looking amazing

Robert Podkoński
Looks awesome already! Keep it up, Romain!

Gary Victory
Totally echo Roberts's comments. Awesome work so far on this build Romain.

Christoph Kunz
👍 👍 👍

skyfox22
wow that's amazing how on earth did you get the finish so good

Alec K
Outstanding work on those invasion stripes 👍

Romain Sablou
Many thanks everyone ! It means a lot during this time consuming project. The finish is acheived by cleaning and polishing the model prior to paint stage. Then by using well diluted paint for thin and smooth coats of paint.

Gary Victory
NMF finishes are more work, but so much more rewarding when done. Super metallics for me definitely the metals paints available.

Yury
Why haven't I seen this miracle before?! Magnificent, super! Fabuleux!

Jakub Fiala
Those worn invasion stripes look great! 👍

CaptGPF
Agree with Alex, the invasion stripes are sooowell done. Roman - how are the Mr Hobby metallics compared to the AK Xtreme metals?

Romain Sablou
Thanks mates 🙂
Mr. Hobby Super Metallic pros : much stronger during weathering steps. cons : dilution can be tricky, not much choices in shades.
AK pros : more variety of color , perfect pre dilution for airbrush, cons : very sensitive to solvant during weathering, high drying time.

Tony Tonov
Great build, I've been following it from the beginning. Impressive result and attention to details. It is an inspiration for my next model 👍

Gary Victory
Absolutely love how this build is coming together. Love the paint work Romain.

Romain Sablou
Thanks guys ! I can't wait to fully dive into weathering

Clement
At this point, I feel like most of us are just speechless, your work is really awe inspiring!

Lebloge
😮 Just one word in mind...perfection ! 😮

Sven Schönyan
Tremendeous work and a extremely good result! What solvent do you use for manipulating the artist pen brushe colours?

Shar Dipree
Awesome work. The rivets alone enliven the model immensely and then the great paintwork and conclusive weathering. Very very beauftiful B-26 so far. 👍

Neuling
Same as Shar Dipree. 👍👍

Romain Sablou
@Clement, and I lack words to thank you all for your support on this long term project. Thanks again everyone ! 🙏
@Sven, I don't use any solvent, you can manipulate the ink fresh out of the pen. But if you still want to dilute or erase something, you can simply use tap water !

Sven Schönyan
Thank you Romain!

Danny Meer
Pfff...
thought to myself, lets start with a simple kit next to the Aussie groupbuild...

The Instruction manual is not much of a instruction manual 😛
All the parts in this trailer kit have stuff you need to get of, only way to get this done is with a dremel...
So there will be a great amount of time needed to get the parts ready before use 🙁

Also started with the body of the van, washed and primed atm

Danny Meer
It's insane the amount of crap I needed to get of the parts with a dremel...
After using the dremel, sanded the parts and looks alot better now 🙂

Bozzer
I've never worked with resin Danny, but that's a lot of clean up. Do you have to sand it lightly, to get a key for the paint?

Chris Greathouse
Watching!

Nathan Dempsey
I'm in for this project. I could use a 1/1 trailer like that 🙂

Chaz Gordon
Resin kits are a lot of work, but usually worth it for the Detail or unusual subject

Bozzer
Lol Chaz, that sounds like most of the women I meet! 🙂

Danny Meer
Is first for me as well Bozz, not sure how you can best paint this thing..can I just use primer, do I need to sand it..I know you can't use same glue as normal kits 😛

Dominik Weitzer
where did you get this cool Trailer? have you a link to order? that is awesome!!!

Danny Meer
It's a Hungarian website 🙂
balatonmodellshop.co..hicles-trailers-1-24

wilky
I never thought I'd see a single axle trailer kit

Bozzer
Danny, I believe that you have to wash parts in soapy water and lightly sand, but I'm no expert. Looks like you're the guinea pig this time bud? Have you checked YouTube etc, for videos? PE I've done, resin I haven't. I've heard about the clean up, but this is the first time I've seen it. You can also check out the KFS site, for information. They're pretty good.

Danny Meer
Got the body of the van ready for the flip flop color after a few layers of black 🙂
Gonna do some research on best approach on the resin

Chris Greathouse
What is a flip flop color?

Chaz Gordon
Changes colour depending on light angle

Dominik Weitzer
Danny, why dont you use a paint stand? Have you no trouble with the paint if it is dry to glue on the cardbord?
I always use one. if my tamiya paint stand is in use, i take a spraycan to put the body on or a bottle. Some tape on the cap to hold the body in the roof for falling down and it works.

Danny Meer
I place a piece of paper under it and after about 5 minutes I look if it stuck and if so carefully pull it loose.. But every time when I order stuff that I need, forget to order a paint stand lol
But now just ordered the Tamiya Spray-Work Painting Stand Set, will make it a bit easier 😄

Dominik Weitzer
🙂 definitely Danny. the paint stand is worth the money.

Danny Meer
Got 3 layers of flip flop paint on it, but to much orangepeel atm, gonna light sand it and do another layer and hope it will be ok'ish 😛

Dominik Weitzer
uhhhh that color looks sick! sand it wet with grid 1000 and 2000 and it will work 😉

Chris Greathouse
That looks awesome!

Danny Meer
Damnit!!! need more of the paint for my caravan and 1 more layer on the VW van...but the damn paint is no longer available 🙁
Not sure what I'm gonna do now....

Bozzer
Can you email the manufacturer Danny?

Nathan Dempsey
What's the make and name of the color Danny? I can check locally to try and find it.

Chaz Gordon
A coat of a complementary Flip Flop paint over the top could produce an interesting effect? Difficult to test before you go ahead though

Dominik Weitzer
I can also take a look in our stores around!
please post your can you used😉

Danny Meer
This is the can used. called:
DupliColor Flip Flop Effect Tropical Spuitbus 150ml
Art.nr.: 665516
This 1 came from nonpaints.com/nl/ (CROP)
It's a discontinued product now, tried to find it online but nothing yet..

Danny Meer
Got an email from nonpaints shop that they had a similar color in warehouse that wasn't on the onlineshop but in a dusty corner. It's almost the same, but a little lighter 🙂

Chaz Gordon
A light coat should combine the two effects. Flip flops are to a degree additive to the base. I've just invested in the whole chameleon range from Green Stuff World, Hoping I haven't made a mistake, but all the reviews and videos I've seen indicate I could do a lot of interesting effects with them over different bases.

Danny Meer
Gonna check that Green Stuff out 🙂

wilky
I'm waiting for some Blue stuff from Green Stuff World.
I'm eager to make copies of some of my scratch work that I need replicated

Chaz Gordon
It's a dangerous site, I only went to get some paint and ended up finding wayyy too much, the blue stuff caught my attention, and some masking putty, and some resin molds, and some cool Metallica, and a cool tool for making ridged pipe work.

Danny Meer
lol Chaz

Danny Meer
Sanded the body with 6k sand sponge and water, after that used 1 coat of the Oriental sun flip flop paint and looks great 🙂 Got the trailer done as well, now I need to cut plastic to turn it into a caravan.

Danny Meer
Short video of the paint in the sun to see the color effect
Youtube Video

Chris Greathouse
Very nice!

Tom ...
Pic #3 is just rude! WTF! That kit is bordering on being a scratch build 🙂

Christian W
This color is awesome. I painted an 1/16 scaled Trans Am a long time ago.

Awesome paintjob!

Bozzer
That's a great funky colour Danny!

Dominik Weitzer
Glad you have get similar color! it looks really good - i can't find the same color here.
Well done Dany!

Danny Meer
Thanks guys for the nice comments 🙂
Started with the decals, It's alot of work for a small kit lol..1 and half hour and just did 1 side and roof, now the rest tomorrow and then put it together 😄

Chris Greathouse
The flip color and the decals looks fantastic!

Chaz Gordon
Nice work Danny. Don't sweat the time things take, just the red stripes on my mini Thunderbird 4 took me over 2 hours. I look at time spent on a model perhaps a bit differently. As this is a leisure activity, rather than hours spent per kit, I think of it as cost per hour of leisure activity. When looked at that way, this is one of the cheapest hobbies out there for me. a £20 kit with in the region of £3 of paint & materials added just kept me occupied and engaged for 2 Months of evenings and weekends. That's about the same as my Netflix subscription.

Chris Greathouse
Just imagine doing the decals on my Hatsune Racer... That was a nightmare in decals, took a couple full solid days to work through them. Project 048 -- Hatsune Miku BMW Z4 GT3 Super GT | Album by chrisagreat (1:24)

Dominik Weitzer
like the decals on that color more than the black on the box! Looks good Danny! Take the time it needs pays the effort you get😉

Danny Meer
Almost done with the decals 🙂 on right side was weird to do 4 small decals first and then the big decal over it...messed up right-side door tribal decal 🙁 but luckily you don't see it very well 😛

Chris, that car must have been a decal nightmare lol..still came out very nice 🙂
Chaz, that's so true mate, loads of hours well spend 😛 Only the paint on this 1 was a bit much for such a small kit 😛 Think total of around € 35,-/40,- euro with primer, paint and clear 😄

Tom ...
That is so awesome, Danny! Top notch job! Clear coat that puppy before anyything happens!

Danny Meer
Thank you so much Tom, really appreciated 🙂

Chaz Gordon
Danny, I hear ya on the cost of paint in a can. Airbrushing may be a big outlay up front, but the costs per kit after are massively reduced. My Mossie and R2 used a whole can of Tamiya Fine primer between them, and 4 Tie fighters that I built used 3 500ml cans of automotive primer. It's the same with varnish, R2 consumed 2 cans of Tamiya Semi-Gloss, and the Mossie a can and a bit of Tamiya Matt. I get the automotive primer cheap in bulk, but The tamiya cans are £7 each. The trouble with spray cans is that most of the volume evaporates or goes on the paper around the thing you're painting

The Thunderbirds Pilots, Is the first kit I've done without any spray cans. The Primer is Vallejo Poly, think I used between 5 - 10ml (200ml = £11.99). The main colour is Vallejo Game Air, about 5ml used (17ml = £2.40) The five vehicles were about 1-2 ml each of various Vallejo colours. (all pre thinned too) Varnish was 10ml of Vallejo Satin (500ml = £11.99) and 10ml of Vallejo Gloss (500ml = £11.99) Only the varnishes needed thinning, which was done with De-ionised water £2 for a Litre bottle, probably consumed about 8ml so far.

The most expensive part of the airbrushing was cleaning the thing, I probably used around 50ml of airbrush cleaner (200ml = £7.99) and 30ml of Airbrush thinner (200ml = £9.99)

So while I spent more to get all of that than you did on the bus, I'm left with almost full bottles of everything, that I will use on the next kit and the next kit and so on.

Colour shift paints are available for airbrush at only a small increase on the cost of regular ones. the Green stuff Chameleons work out around £3 for 17ml, and Vallejo also do a small range at £4 for 17ml. from what i've seen, coverage per kit would be about the same as the regular paints, although I've also had to buy Vallejo Gloss Black primer as a base.

The trouble is, you have to repeat all the ancillary fluids if you use a different type of paint - Tamiya Acrylics need a different thinner, which is about the same price as Vallejo thinner, and 99.9% IPA for cleanup (which is double the price at the moment thanks to CV19), but they can be varnished with Vallejo, and can also go over Vallejo primer. The Alclad I've bought needs a whole other set of Primers, thinners, cleaners and varnish.

Whatever you do, initial outlay is going to be high, but once you're set up, airbrushes consume very little. Unless you are trying to paint something with Tamiya White, that stuff just doesn't cover, I keep a stock of at least 3 10ml bottles at all times in case I decide I want to paint something white.

Chaz Gordon
The Van looks fantastic By The Way.

Bozzer
Chaz, you're probably aware, but just in case... You can get a large can of Halfords plastic primer, in various colours, for around a tenner. I have used it in the past, and it's just as good as Tamiya, but you get nearly 3x the amount. Recently I have been working with Plasticote primer. A large can, was £8 from B&M bargains, no less! I find it a little grainy, but a quick sand with some 2000 wet and dry, sorts that out. They also have a gloss white, in the smaller can, that's the best rattle can white gloss, I've ever seen. Worth a punt buddy.

Chaz Gordon
Thanks Bozzer, But I'm converted to Vallejo primers, so cheap. If I use cans, I've got a 12 pack of U-pol from ebay for £30. It doesn't like cold weather though, really have to shake the can for ages, and I tend to grab a couple of cans and keep them in the house for a couple of days if I'm going to use it. The colour is a perfect match for imperial Grey when I'm doing Tie Fighters and other imperial kits.

Danny Meer
It has been a while since last time working on this 1. today did the last few decals on the van. the wheelhub decals are so damn small and really have to look close at it to see the black vw decals...
Now I can do the last 1 or 2 clear coats on it, but the humidity in my hobbyroom....pffff.... last week it was 30+ celcius and now the humidity is going thru the roof lol...
The gold parts look great on the body color if I may say so myself 😄

Danny Meer
Got my VW T2 Steampunk van ready, very happy with it 🙂 got a few flaws but I can live with it 😛
Now time for the caravan 🙂

Dominik Weitzer
Awesome! The color and the gold matches perfect!

Danny Meer
Thank you Dominik 👍 I really love it how the color came out. The paintjob costed me more then the van itself 😄

Denis Stenko
Cool!! Very nice job! I like it!

Christian W
And it's worth it! The costs😉

Denis Stenko
😄

John Thomas
Very cool

Laurent VILLANUEVA HELLER ForEver
nice

Slavo Hazucha
Nice & shiny - cool display of different golds, the decals were worth all the trouble too - and the hi-polish mirror bumpers & rims really make the show 👍

Jeroen
Very nice Danny! Great colour. Good idea to have a caravan behind it too.

Chris Greathouse
Holy amazeballs dude! Your Steampunk Girls VW bus turned out amazing!!!!!

Danny Meer
Thank you guys for the nice comment, working on the caravan atm and struggling with the roof lol
Could have make it eassier on myself with making a flatroof but where's the joy in that 😛

Bozzer
Hairdryer helps to gently bend plastic😉

yngvenett
I don't want to cause PTSD or anything, but I'm really curious about what happened to the trailer.....
The VW looks amazing!

Rod -
Very cool 🙂 Are the kit parts plated gold color?

Robin (WhiteGlint)
Oh dang, lovely! 👀 Great job. 👍

Nigel Chapman
Nice and sparkly in the sun