Wiadomości
Ricardo Reis
dodał nowy album.
dodał nowy album.
64 23 October 2023, 19:02
James C
Looking fantastic 👍
Oversized decals in 1/48 appears to be a common problem with Italeri aircraft kits in 1/48. Despite the printing quality (Cartograph) it appears that Italeri are incapable of accurately measuring them for fit before sending off to Cartograph for printing. I have encountered similar decal fit issues with their 1/48 F-14A, Mirage III, Mig 21, S-3 Viking etc. Given that most (if not all) of their kits released these days are reboxings of older tooled kits; having to replace the decals as well is just a no go for me and so I now avoid the brand completely.
Looking fantastic 👍
Oversized decals in 1/48 appears to be a common problem with Italeri aircraft kits in 1/48. Despite the printing quality (Cartograph) it appears that Italeri are incapable of accurately measuring them for fit before sending off to Cartograph for printing. I have encountered similar decal fit issues with their 1/48 F-14A, Mirage III, Mig 21, S-3 Viking etc. Given that most (if not all) of their kits released these days are reboxings of older tooled kits; having to replace the decals as well is just a no go for me and so I now avoid the brand completely.
19 July, 18:45
bughunter
As you may know I love wooden propellers by I must admit that your propellers looks fantastic 👍
As you may know I love wooden propellers by I must admit that your propellers looks fantastic 👍
19 July, 19:34
Ricardo Reis
@James, I was not aware of this issue; I only started noticing when I started to apply the first decals and looking at the reference photos - there are 2 or 3 photos of this specific aircraft; now it's to late to go back, but I am alert for the future; @bughunter, I love this typo or propeller, like the ones we can see in the A400M, they are very beautiful and elegant and powerful at the same time!
@James, I was not aware of this issue; I only started noticing when I started to apply the first decals and looking at the reference photos - there are 2 or 3 photos of this specific aircraft; now it's to late to go back, but I am alert for the future; @bughunter, I love this typo or propeller, like the ones we can see in the A400M, they are very beautiful and elegant and powerful at the same time!
20 July, 12:02
Ben M
I agree with the propeller lust. This kit is just the way I like it, nothing fits.
I agree with the propeller lust. This kit is just the way I like it, nothing fits.
11 September, 01:09
Ricardo Reis
It will go to my basement when ready... to join the other finished models in storage! 🙂
It will go to my basement when ready... to join the other finished models in storage! 🙂
27 September, 18:41
Ricardo Reis
And that's a wrap! Terrible modelling experience, very glad it's over; final photos can be found here: E-2C Hawkeye | Album by RReis (1:48)
And that's a wrap! Terrible modelling experience, very glad it's over; final photos can be found here: E-2C Hawkeye | Album by RReis (1:48)
1 October, 22:47
Przemyslaw Sroczynski
dodał nowy album.
dodał nowy album.
9 15 September, 19:49
Michael Kohl
Following. Still struggling with my Revell/Modeltrans/OKB Grigorov Merk. Also bought the EMP3D ball and chain armour but see that you used the balls only. Anxious to hear why. Where did you find the super fine chain? I didn't.
Following. Still struggling with my Revell/Modeltrans/OKB Grigorov Merk. Also bought the EMP3D ball and chain armour but see that you used the balls only. Anxious to hear why. Where did you find the super fine chain? I didn't.
1 October, 04:48
Shar Dipree
Following.
I had also thought about replicating the chainball armor with chains for my two Merkavas and tried but failed because the chains I found all seemed too big.
Following.
I had also thought about replicating the chainball armor with chains for my two Merkavas and tried but failed because the chains I found all seemed too big.
1 October, 06:28
Michael Kohl
I was elated when EMP3D released the ball and chain armour and I ordered it and it looks very good. So I am anxious to know why Pryzemyslav discarded it.
I was elated when EMP3D released the ball and chain armour and I ordered it and it looks very good. So I am anxious to know why Pryzemyslav discarded it.
1 October, 08:10
Przemyslaw Sroczynski
Thx mates.
When i've bought EMP3D i was very happy, because there are no in the trumpeter set.
But after installation it occured they hang to low and just break with little turret movement
After few trials to fix them, ideas to rebuild the turewt, i've decided to replace them
Found small chains (even smaller that i've used) on mojehobby.pl
Thx mates.
When i've bought EMP3D i was very happy, because there are no in the trumpeter set.
But after installation it occured they hang to low and just break with little turret movement
After few trials to fix them, ideas to rebuild the turewt, i've decided to replace them
Found small chains (even smaller that i've used) on mojehobby.pl
2 October, 04:56
Tony Leung
posiada ten przedmiot
posiada ten przedmiot
F/A-18E & F/A-18F Super Hornet Also Includes the EA-18G Growler
Detail & Scale Nr. 9
Haagen Klaus, Bert Kinzey
2020 Cyfrowy 2 October, 04:43
Ervin Torok
posiada ten przedmiot
posiada ten przedmiot
CMP in LRDG service
LRDG F30 Patrol Truck Limited BONUS Edition Thunder Model 1:35
35305 2023 Nowe części 2 October, 04:40
Kent Strickland
posiada ten przedmiot
posiada ten przedmiot
Spitfire Mk. Vc - Hispano 20mm and Browning .303 barrels For Eduard
Master 1:48
AM-48-166 2021 Nowe formy 2 October, 04:38
Kent Strickland
posiada ten przedmiot
posiada ten przedmiot
Hawker Tempest Mk.V early Hispano 20mm cannon barrels in fairings
Master 1:48
AM-48-133 2017 Nowe formy 2 October, 04:38
Dave Burgess
dodał nowy album.
dodał nowy album.
33 zdjęć/zdjęcia
Boeing CH-113 Labrador, RCAF (early)1:72
Projekt: Boeing CH-113 Labrador, RCAF (early)
17 15 July 2018, 19:51
Dave Burgess
I bought this through E-Bay, only to find the kit had already been started, and a couple of key pieces were missing. Fortunately, I was refunded, and the seller let me keep the model.
In order to build it, I had to pour a couple of replacement resin pieces; it cost me more for the resin and casting material than I paid for the kit! Still, in the end, it turned out quite well. Because it was much more work, I think I have a soft spot for this one over the yellow/red Labrador
I bought this through E-Bay, only to find the kit had already been started, and a couple of key pieces were missing. Fortunately, I was refunded, and the seller let me keep the model.
In order to build it, I had to pour a couple of replacement resin pieces; it cost me more for the resin and casting material than I paid for the kit! Still, in the end, it turned out quite well. Because it was much more work, I think I have a soft spot for this one over the yellow/red Labrador
21 July 2018, 19:13
Michael Kohl
I want to build the yellow canadian CH-113 on day myself. Nice to see those two beauties sude by side. I read that the Hobbycrab kit is a challenge. I'd appreciate a word or two on how the build was.
I want to build the yellow canadian CH-113 on day myself. Nice to see those two beauties sude by side. I read that the Hobbycrab kit is a challenge. I'd appreciate a word or two on how the build was.
1 October, 07:45
Dave Burgess
Thanks, guys! My favourite CH-113 of the two is the old red, white & blue RCAF version, not for the paint scheme as much as dealing with the missing parts, replacing them with resin cast replicas and finishing the model. Nice thing was - the guy who I bought from on eBay refunded my purchase and let me keep the kit. So the price was certainly right.
Thanks, guys! My favourite CH-113 of the two is the old red, white & blue RCAF version, not for the paint scheme as much as dealing with the missing parts, replacing them with resin cast replicas and finishing the model. Nice thing was - the guy who I bought from on eBay refunded my purchase and let me keep the kit. So the price was certainly right.
2 October, 04:25
CaptGPF
dodał nowy album.
dodał nowy album.
9 zdjęć/zdjęcia
Another Day at Farnborough - Revell Eurofighter 1/48 - WIPNowy: 1 October, 22:13 1:48
Although I chose to use Eduard PE parts for this kit, the cockpit details were actually pretty good!
+1 Merit
Projekt: Eurofighter Typhoon „Black Jack“
1 1 October, 22:12
Kesa Tiho
That looks really well made, youve really out done yourself capt. Having built my fair share of revell im really surprised that the cockpit has such a good level of detail
That looks really well made, youve really out done yourself capt. Having built my fair share of revell im really surprised that the cockpit has such a good level of detail
2 October, 04:24
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo