Wiadomości

Finn
I'm in

Cristian A Autor
Thanks Finn, welcome 👍

Rui S
Looking great 👍 I'm in 😎

Sebastian Meyner Autor
Welcome & Thank you Rui S 🙂

John
Nice cockpit, great start. 👍

Sebastian Meyner Autor
Thanks mate, much appreciated 👍

gorby
Excellent work so far!

Sebastian Meyner Autor
Thank you Gorby, much appreciated mate! 🙂

Air no
Excellent travail. Merci pour ta visite Sebastian !!

Sebastian Meyner Autor
Thanks mate 👍🏻

Felix
Looking great 👍🏻 Following !

Guy Rump
Looking awesome, following. 👍

Desert Marlin
Soo good!!! I like these 109's that have shown up lately!!!

Guy Rump
Looking great, following. 👍

Mona
looking forward to seeing more of this project👍.my uncle(5th SF) was in country just after TET and one of the few things he ever... spoke of more than once, was about riding on top of a M113 that rolled over a mine

Mathias Decommere Autor
Thank you Mona, that must have been a terrifying experience. The idea would be a fortified position in the Mekong Delta. I'm planning to build a sandback bunker and a piece of ricefield. The M113's will be stationary in a defensive position. Soldiers will be relaxed not knowing what is coming. But the layout is still evolving. Haven't decide the size of the groundwork yet. I'll be starting the diorama base soon... Will be continued 😉

Neuling
Looking forward ........

Spanjaard
vehicles look really good, looking forward the rest of the dio

Kim Branders
Love the dusty look.

Mathias Decommere Autor
Thank you Neuling, Spanjaard and Kim! I'm starting the diobase this week!

Mr James
Looking good Mathias. Lovely work on the M113's. What did you use as the 50 cal casings?

Mathias Decommere Autor
Thanks Mr James, I used simply the copper of an electric wire. An idea I got from lasercreationworld. It is a bit too narrow, but the overal impression works I think.

Rui S
The vehicles turned out great 👍

Thomas E.
Very nice looking vehicles, above all the interior; also the entire scene - I'm very curious about this diorama.

Mathias Decommere Autor
Thx Rui and Thomas E.! I hope it turns out as I am imagening it!

Mark Sherwood
Progress looks good Mathias, looking forward to the end result.

Michael Kohl
Following too.

Shar Dipree
Looks great so far. Following.

Pietro De Angelis
Great subject, good work Mathias!

Mathias Decommere Autor
Thank you for the support guys!

gorby
This is starting to look spectacular!

Thomas E.
completely agree with him!

Kim Branders
Knap Mathias.

Ben M
👀

Stuart Fowle
Looking good, following 🙂

Thomas E.
you may find this helpful (I hope so 🙂): data.opendevelopment..tnam-.compressed.pdf (5.11.2024)

Mathias Decommere Autor
Wauw! That information is very specific! Thanks!

gorby
I like the palm tree leaf. Did you make it yourself?

Mathias Decommere Autor
I did, another 79 to go...😅

gorby
Nice work. What did you make out of, paper?

Pietro De Angelis
Good "gardening" work then Mathias,
you will have all my comprehension!🤗

Spanjaard
more details about the palm tree please 🙂

Mathias Decommere Autor
I'm experimenting with a thermoplastic called Worbla. This leaf was manually made. Next try is to lasercut it. If this is possible, the possibilities will be endless!!

gorby
I've not heard of Worbla before. This is an interesting video about using it:
Youtube Video

Mathias Decommere Autor
I used it for my other artwork: instagram.com/artrop..gsh=OWh4c2Jyd2Vqamgy

Thx!

Mark Sherwood
Looking good Mathias, like the bag work on the outpost. 👍🥸👍

Spanjaard
nice yo see those old Verlinden being still usted in a dio 🙂

Rui S
Nice progress 👍 Keep it coming

CaptGPF
OMG - I'm so glad I saw this. The M113s are simply stunning! The Dio is really shaping up to be a killer as well - don't know how you havent\'t gone crazy building the palm leaves, but wow!!!!

Mathias Decommere Autor
@CaptGPF, thanks man! I cheated a bit on the palmleaves. I lasercutter the leafs in a thermoplast sheet, but there is still a lot of finalising to do offcourse. I don't think this method has been tried before... Also thank you Rui!

Spanjaard
cheated? i certainly disagree. you did a great use of what you have at hand. why should you buy the same stuff as aftermarket if you can make your own? 😉 great job

CaptGPF
Totally agree with Spanjaard - it's not cheating if you make it yourself. Making kits doesn't mean you have to suffer if a more efficient way can be used!

Mathias Decommere Autor
Thanks for the approval guys! Very excited to see the end result

Mona
amazing work ..mad skills, Mathias

Mathias Decommere Autor
Love your comment Mona!

gorby
Looking excellent so far. The palm trees are the most realistically modelled ones I've seen.

Pietro De Angelis
Beautiful and realistic palms, masterpiece!

Spanjaard
amazing job on thiae palm trees

Mathias Decommere Autor
Thanks for the encouragement you guys!

Rui S
Nice army 😉

AndreasK Autor
Made some progress on the Wingsy Kits Bf 109 E-1. It is really a lovely kit, very nice to build.

Gerald
👍

Guy Rump
Looking good, following. 👍

Kees Borgers
Watching the build.

AndreasK Autor
Slow progress over the past weeks, but I now managed to finalize most of the airframe and rescribe the typical panel lines on the rear fuselage upper and lower spine.

AndreasK Autor
Started the preshading. One needs a quiet day and move slowly along.

AndreasK Autor
Finished with the preshading 😊 I did the blue areas with H56 Intermediate Blue and the rest with H65 RLM70

AndreasK Autor
Some progress with the painting. Completed the RLM65 underside and the RLM02 on the upper

Desert Marlin
Looks great!!! I have that same stand! The really work well.

AndreasK Autor
Uploaded pics of the final result.

Guy Rump
Very nice build! 👍

Christian Abraham
Really nice

Rui S
Great work, indeed 👍

Desert Marlin
Great finish!!!

AndreasK Autor
Thank you guys! 🫶🏼

Siegfried Van den Bosch
Nice one !

BetterTimes-Henry
Very nice, subtle weathering! Well done!

John Lambert
That's a nice model and a neat base for it. You deserved the award.

Spanjaard
fantastic job. congratulations on the medal

Pietro De Angelis
Beautiful Bf 109,
deserved medal,
congrats!

Desert Marlin
Congratulations!!!
QUESTION: Are the medals 3D printed?!?

Rui S
Great work 👍 Congratulations

Robert Podkoński
Taking a first row seat, of course! 🙂

Ludvík Kružík Autor
Welcome Robert, nice to see you again at my model build. 🙂
It will again be a plane with a special paint job.

Robert Podkoński
How could I miss such a talent show? 😉

Rando
Love me a Swedish delta 🙂 or I guess Czech in this case

Ludvík Kružík Autor
Robert, you've come at the right time. I started airing my show today. 😉

Ludvík Kružík Autor
Welcome, Rando. I'm glad you're here. You're not wrong, the plane will be in Czech colors. 😄

Mark D
Nice and following this build! I heard that the panellines of this Italeri kit are a bit soft or a bit deep, are they? It looks, well, acceptable.

J35J
Taking a chair 👍🏻

Ludvík Kružík Autor
Mark, it's true that the plastic of this kit is a bit softer than the standard kit, but it's nothing terrible. Also, the panel lines are a bit thicker (compared to Tamiya or Eduard kits), but again, not entirely bad. The kit does have a few minor shape flaws as well, but overall it's pretty good and with a little effort you can build a nice JAS-39 model from it.

I will describe the kit's faults and how to fix them, including modifications to the "C" version (the kit represents the original "A" version), as the model is built.

Ludvík Kružík Autor
J35J, welcome. I hope you have a good time. 🙂

Ludvík Kružík Autor
Little progress on the model.

Ludvík Kružík Autor
I'm preparing the hull for its closure. I've glued the assembled engine and cockpit to the left half of the fuselage.

Alec K
Looking great! Taking a seat for sure 👍

Vloudila se ti tam čeština, pics 13-16. Jen v případě že to nebylo úmyslně 😉

Ludvík Kružík Autor
Hello, Alec! There's always room for you at my place. 🙂
Thank you for letting me know. It was my fault. The texts are already in English.

Jos Jansen
Watching

Michael Kohl
Me too

Ludvík Kružík Autor
Jos and Michael, welcome!

Ludvík Kružík Autor
The fuselage halves are already glued together.

Jos Jansen
How's the fitting...?

Ludvík Kružík Autor
I haven't put much together yet. The fuselage halves can be glued together without any problems, they fit together well and the panel lines follow each other. The glued joints are gapless, just sand them lightly. When gluing the fuselage tip, care must be taken to ensure that it is turned correctly. If the tip is glued to the fuselage with the bottom side up, it will not follow the shape of the fuselage correctly when viewed from the side.

If there are any problems during construction, I will point them out.

Ludvík Kružík Autor
Work on the model continues. The first problems are appearing. It was necessary to modify the joints between the upper and lower half of the wings and also the joint between the fuselage and the wings. The use of putty and sanding is unavoidable.

Ludvík Kružík Autor
Little progress today. I glued the wings to the fuselage and started prepping the other parts.

Rando
Really cool techniques Ludvik! Taking notes on how you reduced the gaps

Ludvík Kružík Autor
Rando, thank you for the compliments. 🙂

The technique of extending the fuselage by gluing struts from inside the fuselage is nothing new. I have been using it successfully for many years. In my opinion, this technique is better than gluing the wings to the fuselage without extending the fuselage and then repairing by filling large gaps with putty and sanding.

Ludvík Kružík Autor
I'm continuing with modifications to fix some bugs in the model and rebuild it to version "C".

Ludvík Kružík Autor
I sanded and puttyed the model. And I got to the point where it was hard to recognize the places that still needed to be repaired. So tomorrow (time permitting) it's surfacer's turn. I'll take some pictures tomorrow.

Ludvík Kružík Autor
The Gripen model has been sprayed with Surfacer.

Alec K
Looking good! What Surfacer do you use (1000, 1200)?

Ludvík Kružík Autor
Hi Alec, I use Surfacer 500. After finishing minor finishing work and sanding the Surfacer, I spray Base white 1000 (both are Gunze) on top.
I then spray the camouflage paints on top of that prepared surface.

Alec K
Thanks 👍

Ludvík Kružík Autor
Most of the errors are already corrected after sealing. Now I will add some small details on the surface of the aircraft. I'll have to scratch most of them.

Ludvík Kružík Autor
Not much time to work on the model this week. But some progress was made on the model after all.

Ludvík Kružík Autor
When I looking the photos I found minor differences in the details on the underside of the rear fuselage. The model will need to be modified.

Christian
Beautiful work! Thank you for sharing all of this tremendous research detail - very fascinating. I have this same kit on my "to-do" shelf, so I'll be looking over your shoulder for tips and ideas.

Ludvík Kružík Autor
Christian, welcome aboard! I'm glad you're interested in my project.

When you look over my shoulder, make sure you don't make the same mistakes I did. I've just discovered that my inattention has caused the flare hole to be too far forward. I'm working on correcting that mistake right now.

And I remind you that the modifications described are only for Czech Gripen. For other users' aircraft these details may differ.

Vintagemodeler
Another one to join to the observation, as I will have to do it at some point aswell . Is it the Front Noise need to be replaced by the quick boost?

Ludvík Kružík Autor
Welcome Vintagemodeler! I hope that in the course of building my model you will find inspiration for building your Gripen.

I'm very sorry, but my English skills are not perfect and I don't understand your question. Could you elaborate on your question a bit?
Thank you.

Vintagemodeler
Yes mr! I cant believe how you did those amazing scratch! i just mean if front noise looks good, as few people told me that it need the QUICKBOOST upgrade part, i get it for mig 29 and Su-27, but didnt get it for JAS-39 yet, as i didnt saw that much difference.
kind regards

Mark D
JAS 39C/D Gripen - Correct Nose (Quickboost QB 48 227, 1:48)

Ludvík Kružík Autor
Vintagemodeler + Mark D, thanks for the explanation.

I think the QUICKBOOST nose is not necessary. According to the drawing, the nose from the kit has a good shape matching the drawing. The bad shape of the nose is elsewhere. The top of the nose needs to be corrected. The windshield in the kit rests on a raised area that is not on the real model. However, this can easily be corrected with a little putty.

A clear description of the basic modifications to the Italeri kit can be found here: kits.kitreview.com/jas39agripenreviewrw_1.htm

Ludvík Kružík Autor
Moving the flare launcher to the correct position is done. I will fix minor errors after spraying the model with Surfacer.

Vintagemodeler
Amazing article! What a nice work mr!

Ludvík Kružík Autor
Vintagemodeler, thanks you!
I agree, the article clearly describes the modifications of Italeri's biggest faults. But since this article was published (2005) many JAS-39s have been upgraded (some machines more than once) and the appearance of some details on Gripen aircraft has changed. When building a particular machine, it's good to have not only a drawing, but also photos of the particular machine.

Ludvík Kružík Autor
I'm continuing to restore the lines between the panels. It's slow going, but the lines being restored are increasing.

Alec K
It's looking good Ludvíku (👍

Vintagemodeler
Will be an epic build 👏🏼👏🏼👏🏼

Ludvík Kružík Autor
Thank you Alec!
Vintagemodelerer, the quality of the Italeri kit (considering the time of release) is somewhat half-hearted. But with some effort it can be used to build a nice model. I've already made most of the modifications. Once I finish restoring the panel lines, the model building will go faster.

Guy Rump
Looking good, following. 👍

Ludvík Kružík Autor
Welcome Guy Rump! Good to see you.

Jennifer Franklin
It's been a while since I looked at this one, Ludvik; it is progressing nicely. Your work is exceptional; the attention to detail is beyond my imagination. I love watching what you have done.

Ludvík Kružík Autor
Jennifer, thank you for your kind post. I'm just trying to build my models as best I can and it's great fun for me too.

bughunter
Oh, two Saab at once - no wonder that I nearly missed it! Nicely done too.

Ludvík Kružík Autor
Yes, I'm building two Gripens at the same time. Both aircraft have a large number of the same parts and the same basic grey paint. It makes my job easier.

Ludvík Kružík Autor
Italeri kit contains only one additional tank. But I need two tanks. That's why I decided to make them. To make both tanks the same, I made two.

Ludvík Kružík Autor
The auxiliary fuel tanks are ground down.

Alec K
Very interesting way to make the auxiliary tanks 👍

Ludvík Kružík Autor
Hi, Alec!
There are resin tank castings that can be purchased as separate accessories. However, their price, along with the cost of shipping, is high. It's much more than half the price of the Gripen kit I bought from Italeri. So I decided to make the additional tanks myself.

The choice of how to make the tanks was simple. Making the moulds and then casting the tanks is quite laborious. In addition, I do not have a vacuum pump, so air bubbles would form in the castings. I also don't have a 3D printer and I don't know how to model in 3D software.
Therefore, I figured that making tanks out of paper was the easiest way for me to make them at home.
I think paper is an underrated raw material in plastic modeling. With a little knowledge and skill, you can make various accessories (e.g. additional fuel tanks) out of paper. And as a bonus for the work involved, paper add-on tanks are very light and don't put unnecessary strain on the landing gear. 😄

Alec K
I agree, all good points. For what it's worth, here are my few observations regarding casting from personal experience: for a small job like the tanks, you really don't need a vacuum pump (nor, and IMHO more importantly, a pressure tank). Yes, you will likely get some bubbles in the resulting cast, but those can be fixed relatively easily 👍

Ludvík Kružík Autor
Alec, I also have experience with making parts from cast resin.You are right that bubbles can be fixed fairly easily with putty. But for making 2 tanks I find casting unnecessarily laborious.

Ludvík Kružík Autor
I'm continuing to build the Gripen. I finished restoring the lines between the panels and added more details to the fuselage.

Alec K
👍

Ludvík Kružík Autor
I'm continuing to fix the minor surface errors that surfacer showed. I've also started riveting.

CaptGPF
Love the super detailing - as well as the extensive riveting work. Are you planning to rivet the wings as well? I will need to use your trick of using wires to pull the wings up to close the gaps on the next build. The Italeri kit is a good foundation for the Gripen, but it is sorely lacking in details - I'm glad to see you putting that into the kit.

Ludvík Kružík Autor
@CaptGPF
Thank you for your comment. I'm really glad that my ideas will serve someone else.

I don't plan to rivet the wings. None of the photos (that I have) or the drawing show any rivet lines on the wing surfaces. Except for a few rivets on the leading and trailing edges of the wings. And I have already made these few rivets on the wings. If there are any rivets on the wing surfaces, they are ground in with the surface and not visible under the camouflage paint.
On the other hand, I'm considering removing the rivets from the Gripen Kitty Hawk wings (Kitty Hawk made the rivets marked all over the wing surfaces).
I will definitely do some weathering on the wings though. It's very visible on all Czech machines.

Ludvík Kružík Autor
I have little time to build models lately. So at least in one short spare moment I made an experiment with tinting the transparent cockpit covers.

Thomas Haberl - TH SCALE MODELS
Hi Ludvik! This build turns out t be another "crazy" build ... your view for details is amazing. Do you spend more time on research or building? I´m not sure 😉 again something spectacular is going to come here. Keep going (❁´◡`❁)

bughunter
Wow, your tinted canopies are looking great! I once used a mix with Alclad (on a egg plane) and nearly ruined the clear plastic as it was dull matt afterwards 🙁

Ludvík Kružík Autor
Thomas, at the moment my lack of free time doesn't allow me to pursue modelling as much as I would like 🙁. It's just a transitional period and I hope it will end soon.

As far as research is concerned, I have a database on my computer with information, drawings and photos of aircraft, literature ..., for all the aircraft that interest me and I would like to build models of them. And I am constantly adding to this database. So the moment I start building a model, I simply open the appropriate folder in the database and draw from the information I have stored there.

In some cases, for example, when I was building the MI-24, I was lucky enough to work with a guy who works in an aircraft repair shop as a mechanic, and he would take pictures of various details of the helicopter's structural elements and email them to me, according to my instructions.
I am now using similar friendly help in building both Gripens.

Ludvík Kružík Autor
Bughunter, the procedure I used, I found on the website of a Czech modeller. With long-term testing of different color types from different manufacturers, it achieved the best results with metallic Gunze paints (MC series) and Gunze Mr. Leveling Thinner. The procedure is simple. I mixed gold (MC219 - brass) and brown (H017) into about 1 ml of diluent. From each colour to just a small drop (on the tip of the brush). Metallic paint does a partial transparency effect based on your point of view. From a certain angle, the cabin appears opaque, and from a different angle, you can see right through it. And that little bit of brown puts a slight damper on it.
The original instructions recommend the metallic colour MC215 - copper, but the author used this on American machines. According to the photos, the Gripen cabins are toned to a tawny colour and this is better matched by the golden hue of brass combined with brown. The precise dilution ratio is not critical, but he wants to test it. The important thing is to spray gradually a few thin layers (just to dust lightly) and spray the next layer of paint until the previous one has dried. With a thick layer, diluted metallic paint makes irregular spots.

And if it doesn't work, just wipe off the paint with a soft cloth dipped in thinner and start over.

Jennifer Franklin
That is impressive, tinted canopies. Thank you for sharing the technique.

Ludvík Kružík Autor
Jennifer, it was my first attempt at a tinted canopy. I found a tutorial online and decided to give tinting a try. I did a few experiments on pieces of clear plastic first so I wouldn't ruin my canopy if it didn't work out. During these experiments, I tried different shades of metallic paints and chose the best combination of colors based on the results.

Ludvík Kružík Autor
Gripen is ready to be sprayed with primer.

Ludvík Kružík Autor
Gripen got a smart white coat (primer). Once the cockpit equipment is completed, it will be the turn of spraying camouflage colours.

Mark D
Have you dipped the canopy in for example Alclad Aqua Gloss? It helps for transparency.

CaptGPF
I read on Finescale modeler that you could get a golden tint using a mix of transparent smoke + transparent yellow diluted down with thinner.

Ludvík Kružík Autor
@Mark D
The canopy in the photo of the partially assembled model is not the final solution. I'm still experimenting with tinting the cockpit canopy. The goal is a canopy that will be transparent from a certain angle and partially act as a mirror from another angle. I'm well on my way, but it still needs to be fine-tuned.
@CaptGPF
There are more ways to colour the canopy, of course. Using transparent paints is probably the easiest way. But it doesn't achieve the mirror effect described above. To give you a better idea, I have included a picture of the cockpit canopy from several different angles.

CaptGPF
I'd love to see how you can achieve that angled transparency effect!

Daniel
I had good results with holo nail powder:
Starting Pic 24
Fat Amy WIP | Album by halohead (1:48)

Ludvík Kružík Autor
@CaptGPF
A very thin layer of metallic paint takes care of the angled transparency effect.
@Daniel
Thank you for the illustrative example. Your canopy looks great.

Ludvík Kružík Autor
I'm continuing work on the cockpit. I am gradually adding more details to it.

Ludvík Kružík Autor
The "box" at the rear cockpit wall had to be modified. After correcting its dimensions and location, I added a few cables to the rear of the cockpit. More cables will follow shortly.

Jennifer Franklin
The couple of wires that are in there look great.

Ludvík Kružík Autor
Jennifer, thank you! I hope the cockpit will look even better with the addition of more "cables" and the scope slide. 😉

Ludvík Kružík Autor
I wasn't in the mood for the delicate work of adding wiring today. So I busied myself with fixing a badly shaped engine nozzle.

Robert Podkoński
That's a true craftmanship on this nozzle, Chapeau bas!

Ludvík Kružík Autor
Robert, thank you for the compliment! 😉

Ludvík Kružík Autor
I continue to work on completing the cockpit wiring.

Ludvík Kružík Autor
The cockpit cables are in place. I glued a few more PE parts to the fuselage and now I will prepare the model for spraying.

Jennifer Franklin
The cables look amazing, Ludvik; your attention to detail pays off.

Ludvík Kružík Autor
Jennifer, thank you for the compliments. 🙂 I appreciate it.

Ludvík Kružík Autor
I prepared the model for spraying with camouflage paints.

Ludvík Kružík Autor
Gripen is ready for decals application. 🙂

Daniel
Beautiful work + you're really fast! 👍

Ludvík Kružík Autor
Thank you, Daniel! My speed is only temporary. Soon I will start making smaller parts and the model building will slow down. 🙁

I have started applying decals to the painted model. So far I have only managed to apply the decals with the special anniversary coloring.

bughunter
What a colorful nice looking outfit 👍

Ludvík Kružík Autor
The colour scheme of the in-line machines in a combination of two grey colours with little visible markings is practical for military purposes, but somewhat boring. It's good that there are aircraft with special paint! 😄

Ludvík Kružík Autor
Due to the extraordinary activities that took place during the day, I only got to the model briefly today. In those few minutes I only managed to glue a few decals. I added the national emblems and a few small labels. I will add photos later, when all decals are on the model.

Robert Podkoński
Beautiful scheme indeed.

Ludvík Kružík Autor
Robert, from the first moment I saw the pictures of this Gripen in the attractive anniversary livery, I knew I would eventually build one. When the decals for this machine appeared on the market, I didn't hesitate a moment and bought them immediately. And now the moment has come when I am fulfilling my resolution.

Ludvík Kružík Autor
I "painted" the cockpit canopy with strips cut from painted decal paper.

Jennifer Franklin
The canopy looks amazing

Ludvík Kružík Autor
Jennifer, thank you for your compliment. 🙂

The work on the baldachin will continue. I've only finished the outer part. I'm still working on the inside of the canopy. The inner frame, cross brace, rear view mirrors and the "collar" in the front need to be completed.

"Sparky"
Great idea. I have always wondered why there is not a product to just stick to canopies instead of painting them for the frames.

CaptGPF
Thanks for the tips on the canopy - I have an AH-64D in the queue and was wondering how to achieve the same effects you just taught us! thank you, Sensei! 🙇‍♂️

bughunter
Ludvik, your macro is merciless! I guess in real size it will look better.

Ludvík Kružík Autor
I'm so glad you found my tutorial on painting canopy frames helpful. 🙂

Since masking the canopy, spraying the frame and a thin strip of gasket is laborious and the result is not always 100%, I was looking for another method that would be easier and less laborious. Using decals met my requirements. The application is simple and the results are accurate. And when layering the decals, even a very thin line of gasket can be easily created. And the use of decals also eliminates the laborious cleaning of paint that occasionally runs under the mask.

Ludvík Kružík Autor
I painted the auxiliary tanks this afternoon. Like the plane, the tanks have a special paint job.

Jennifer Franklin
The auxiliary tanks look amazing Ludvik

Ludvík Kružík Autor
Jennifer, thank you for your kind words. 🙂

I worked on the hangers today. For the middle hanger under the fuselage I used a part from the Italeri kit, but first I modified it slightly, sanded it, made new joints and added rivets. For the underwing hangers and rocket adapters I used Kitty Hawk parts. These were left over from an earlier Gripen 9241 build where I replaced them with castings from CMK. For the wing hangers, I replaced the plastic pins with wire ones so I could accurately glue the hangers to the wing. For one thing, the plastic pins were large in diameter and would not fit into the holes in the wings, but more importantly, the wire pins served me well when spraying the hangers and then applying the decals.
The fewer stencils on the aircraft, the more there are on the hangers. I applied 54 decals on all five hangers combined (5234 did not have a forward fuselage hanger when it carried the annual livery). And I still haven't glued the decals on the rocket adapters.

bughunter
Attractive combination of grays and colors 👍 Well done so far!

Ludvík Kružík Autor
Frank, I was intrigued by this machine from the first moment I saw it. The combination of the dark grey motif on the upper surfaces of the wings and fuselage with the red, blue and white accessories on the vertical tailplane and canards is (at least to me) very attractive. Although I find the special colour scheme of Czech tiger-themed machines very successful, this annual livery was a very pleasant change for me. As soon as I found out that there was a decal set for this livery, I knew I would definitely build this aircraft. 😄

This week unfortunately my work obligations did not give me free time to work on the model. I only managed to apply decals for the AIM-120 rocket adapters.
I also ordered a set of AIM-9 rockets from Eduard. The rockets in the Italeri kit are inaccurate and modifying them would basically amount to making new rockets.

Ludvík Kružík Autor
After a short break, I continue working on the model. Gripen has all decals applied and repainted with clear coat. Now it's time to work on illustrating the operational wear and surface contamination.

Ludvík Kružík Autor
Today I did weathering and minor surface damage to the aircraft.
... and I also glued all the racks.

Thomas Haberl - TH SCALE MODELS
Turning out great Ludvik 👍👍👍

Ludvík Kružík Autor
Hi, Thomas.
I'm so glad you like the weathering. I did a little experiment. Instead of traditional oils, I used Agama patina powder. I was pleasantly surprised. The powders work very well. Unlike oils, using patination powders is easy, fast and accurate. And if something goes wrong, the applied patina can simply be washed off with a cloth or cotton swab dipped in clean water (with a little detergent if necessary). 😉

Ludvík Kružík Autor
I'm sure I won't get to work on the Gripen today. So at least I took two photos of the Gripen in daylight with the auxiliary tanks temporarily installed. I like the result, the painted add-on tanks nicely complement the special anniversary livery of the aircraft. 🙂

Alec K
This will be a beauty 👍

Guy Rump
Looking great, following. 👍

Jennifer Franklin
Looks amazing!

Ludvík Kružík Autor
Alec, Guy and Jennifer, thank you so much for your kind posts. It is a great support for me to continue working on the model. 🙂

Michael .
Love the decal work.

Ludvík Kružík Autor
Michael, thank you.
All decals used on this kit are from Czech manufacturer of modelling accessories JBr Decals. I think he did his job perfectly.

Ludvík Kružík Autor
I'm kind of running out of free time lately. Every time I think I'm finally going to get around to building a model, something creeps in. So at least I bought a few accessories for my models, including a set of Sidewinders rockets from Eduard. The ones in the Italeri kit didn't work out so well. 🙁

Rando
Thanks for the nice look at Eduard's Sidewinders, I'm going to have to buy some for my Hasegawa jets that have none eventually. Glad to know they come with a jig too! And I hear ya on the free time thing, my Mosquito probably would have been done weeks ago

Ludvík Kružík Autor
Rando, if you are concerned with the various suspension armaments, check out Eduard's site. Eduard offers quite a wide range of rockets, bombs and other armaments in various scales.

Ludvík Kružík Autor
I spent time this afternoon making the main landing gear legs. I also finished the nozzle.

Ludvík Kružík Autor
I have modified the appearance of the landing gear wheels and am continuing work on the landing gear legs.

Robert Podkoński
Landing gear looks awesome, Ludviku! When finished, your model should stand on a mirror surface!

Ludvík Kružík Autor
Thank you, Robert. I've only finished the front landing gear leg so far. I started with it because it's the most complicated. Filling the "tubes" on the main landing gear legs will go faster. Compared to the front landing gear, they are almost wiring free.

Building the finished model on a mirror base is a good idea. However, I have a slightly different solution. The model will be placed in my display case of finished models on a glass shelf that is approximately eye level (of an adult). If you lean slightly forward, you can see the bottom of the aircraft with the armament and landing gear due to the glass shelf.

Alec K
Great progress 👍

Ludvík Kružík Autor
After a break I resume building the model again. I'm adding hydraulic and electrical wiring to the main landing gear legs.

bughunter
Was your break due to a visit of the Mosonshow?
Your lastest work on the model parts looks nice!

Ludvík Kružík Autor
Bughunter, thank you for your kind contribution.

My break was due to a much less fun thing than attending the Mosonshow. A colleague and I have rented a space where we have offices. At this point, our lease is up. We had to find a new place and prepare to move. We already have the offices, now we have to move in and get everything ready to work in them. So there will be more breaks.

Ludvík Kružík Autor
After this afternoon, both landing gear legs of the main landing gear are complete.

Cristian A
OMG this is so satisfying to watch!! Great model, you are super talented 👍🏼

Ludvík Kružík Autor
Cristian, thank you for your compliments. I appreciate it.

Ludvík Kružík Autor
The first part of the wiring and hydraulics in the main landing gear shafts is in place.

Jennifer Franklin
Looking amazing! I love the detail of your work.

Ludvík Kružík Autor
Jennifer, thank you. I appreciate your kindness.

Ludvík Kružík Autor
After a forced break, I'm back and resuming work on the Gripen. 🙂

Ludvík Kružík Autor
In May last year, Gripen had an accident. During careless handling, the model fell off my desk. Several small parts broke off and the glued joint on the underside of the nose cracked. This accident threw me for a loop and I had to take some time to get back in the mood to continue building the Gripen.
And now it was time for me to continue building.

Alec K
Ah, bad luck. Glad you got your mojo back and bringing this beauty to the finish line 👍

DuperScale
Oh man, thats hard. Hope you can finish the gripen.

Ludvík Kružík Autor
DuperScale and Alec, thank you for your support. As they say, everything takes its time. Yes, the successful repair has given me my mojo back. 🙂
The home straight is in sight, but there are still a few details to finish. I'm looking forward to finishing the colorful "bird" and putting it in the display case. In my opinion it is one of the most beautiful Czech Gripens.

CaptGPF
I think everyone here has had their fair share of accidents - my worst one was when my cat decided to play with my A-10 and send it "flying" into the ground!

That repair looks fantastic! I can't even tell where it was damaged! It's great to seeing you recover from this mishap, especially after the beautiful work you put into it!

Ludvík Kružík Autor
CaptGPF, thank you for your kind words.

The aftermath of the crash has been repaired, but I still need to finish highlighting the lines and shading the panels on the repaired bow.

Ludvík Kružík Autor
One more step closer to the finish line.

Martin Weinpold
Great!

Przemyslaw Sroczynski Autor
It's just the begining
Plans are for all Zumbach fighters - Model Maker decals

Robert Podkoński
Great idea! Watching with pleasure.

Nicolas
Following

Łukasz Gliński
Looks very nice already 👍

Michael Kohl
It does

George Williams
Fantastic looking Datsun.

Rui S
Beautifully done, indeed 👍

Jorge Ferreira
Ó Ricardo achas mesmo que essas decals 3d têm bom aspecto ? Na foto não acho.

Spanjaard
those 3D decals look good, but the details in the original cockpit look just amazing!

Desert Marlin
The 3D decals seem like a mixed bag...

Ricardo Reis Autor
@Jorge, têm sim... o problema é que o cockpit tem o detalhes ainda mais definido, é mesmo lindo, o sacana...

@Spanjaard, the details in the cockpit are more crisp than the details on the decals... it breaks my heart! 🙁

@Desert Marlin, yup, quite. :\

Ben M
You might leave a comment on the 3d decal page so people know what they're getting in to.

Ricardo Reis Autor
@Ben, with GWH this is always the case, I had to do the same thing with my F-15 some years ago; Eduard has done it better, because they always have parts with details and parts that are flat, for this purpose

Cristian A
Grabbing a seat!

Ricardo Reis Autor
Welcome @Cristian

Ben M
Nice work on the line. I've never done that but definitely will give it a try sometime now that I see how well it works. I wonder if I dare use my non imbedding polishing compound or if I should get the hobby stuff.

Ricardo Reis Autor
Thanks; I only use the traditional Tamiya compounds, they work for me, so I'm not changing 🙂

Nathan Dempsey
I'm a bit late. Nice work so far Ricardo.

Ricardo Reis Autor
Hello Nathan; thank you, I delayed these builds a little during Christmas time and New Year, I hope I can pick up the pace now, again 🙂

Desert Marlin
Excellent work! Very crisp detail!

Ricardo Reis Autor
Hello Desert Marlin, welcome and thank you 🙂

Guy Rump
Looking good, following. 👍

Ricardo Reis Autor
Thanks, and welcome Guy

Jorge Ferreira
Ricardo. Esses grampos todos para colar o avião ? Isso é da Revell ou quê ? Mais essa carlinga com riscos por limpar........mais uma boa bo......sta de kit sim senhor. Louvo-te o trabalho mas por 20 paus compro o da revell 😁😁😁

Desert Marlin
That really is a lot of clamps! The canopy came out great! This mold line they put in the top of the glass seems to be pretty common for all the 4th generation fighter aircraft. You make it look great!

Ricardo Reis Autor
Caro @Jorge, the clamp is to hold the temporary canopy in place while the white glue sets, no biggie; the glass seam is a pain, but solved in 5 minutes of careful sanding and polish 🙂

Jorge Ferreira
Oh Ricardo não são esses grampos são os outros..... Ou montaste isso mal ou o kit é mau 😁😁😁😁

Ricardo Reis Autor
@Jorge, os outros foram para assegurar que encaixava tudo bem e apertadinho: os encaixes não são maus, mas também não são Tamiya!

Alexander
Very nice progress all around, looking forward to the digital camo! 👍

Desert Marlin
Shading is looking great!!!

Ricardo Reis Autor
Thank you mates, these colors are indeed very beautiful 🤩

Brontax3000
Nice build! now i am eager to start mine!

Ricardo Reis Autor
Thank you @Brontax3000; the plane is really nice, but prepare for a lengthy build

Naram
following

Ricardo Reis Autor
Welcome @Naram

J K
Following with interest

Ricardo Reis Autor
Welcome J K

Sergej I
Following! Looks great so far!

Ricardo Reis Autor
Hello, thank you and welcome 🙂

Naram
following

Nicolas
Me 2

Guy Rump
Looking good, following. 👍

gorby
Nice work so far.

Shar Dipree
Following! 👍

Rui S
I'm in 😎

bughunter
I cannot answer your question, but I noticed that "Projects" and "Album" switched its positions in header. This makes sense as projects are part of collections (if collections are switched on in Settings).
In the Album tab there are no filter or search criteria. I never use this tab and use the projects with the filter criteria (e.g. completed in 2024) if I'm looking for specific project/album and have all album attached to that project.
Technically Scalemates is a database. In a database you have typically no order of elements - but you can find elements quickly with specific properties. It may happen with another database version in the background that elements come out in other order. But the data are not wrong and nothing is lost - if I ask a specific question (query I got a right answer).
Just my thoughts.
If I look into my album I see the newest on top but all others are in a happy mix of new and older albums. They are also not alphabetically sorted, may be the ones found by the database first comes first, as are no other criteria set.

Neil Autor
Thanks and hello bughunter 👍 you're very kind to add your thoughts and explanations. I noticed that also and I do utilise collections, attach projects and albums too yes. I was dismayed that comments for at least four older albums had all been deleted (not by me) and I wouldn't want others who'd been kind enough to offer feedback and advice on my modelling journey think I'd rudely deleted their feedback. 🙂 Which I did not 👍 anyway enough from me! I'll get off the feed! Thanks again for your advice 🙂

Neuling
Very good model of this interesting vehicle! 👍

Dominik Weitzer
looks great! Well done.

Marc .
Beautiful vehicle!!

Robert Podkoński
Great job!

Rui S
Great work, indeed 👍 SLAVA UKRAINE 👍

Jan Janssen
Love the setting, good going

Jeremias H Autor
Dark steel chips, rust and dirt are left to do. I made a lot of mistakes but I learned a lot, or at least I keep telling me that 😄

Spanjaard
wow! it looks really good already. looking forward the final results

gorby
The base looks exceptionally good!

Pepe
Dios mío!!!!!...... Wooooow!!!!!

Spanjaard
totally well deserved medal, wow

Pietro De Angelis
Beautiful work,
deserved prize,
congrats!

Rui S
Beautiful vignette 👍 Congratulations

Neuling
Looking forward here ...........

Andrej Bassich Autor
😎👍

Villiers de Vos
Coming along nicely.

Andrej Bassich Autor
Thx! 😎👍

Desert Marlin
Nice "up armor" work!

Villiers de Vos
Very nice paint work on the body.

Rui S
Looking good 👍

Skyhiker
I'll follow this. Looks fun.

Eddie Bosano-Andrews Autor
So far it's proving to be really nice kit to build

Finn
Following

bughunter Autor
After a few self-inflicted mishaps, the model of this famous Vega was finally finished.
Many thanks to Jacqueline in Switzerland for her help!

gorby
WOW, that looks beautiful Frank!

Robert Podkoński
Looks better than the one in the NASM (I've seen her there...). Congrats!

Dave
That is a beautiful looking aircraft.

Alec K
Very nicely done 👍

Thomas Bischoff
another masterpiece 👍 👍 👍

Bernhard Schrock
As usual: great job! I like your definition of gloss ("scaled down") 🙂. I do the same to avoid the toy effect. I hope to see more golden age birds in the same manner🙂

Pepe
Grande!!!!!

Nathan Dempsey
Nice work! Looking forward to the finish.

Stuart Fowle Autor
Thanks Nathan.

Mark Sherwood
Following. 👍

Felix
Lovely paintjob, looking forward to seeing more.

Stuart Fowle Autor
Thanks Felix and Mark. It is now complete, just need to get some photos done.

Martin Weinpold
I am watching!

AndreasK Autor
Primed and ready for paint!

AndreasK Autor
Trying out the mottling template for the first time

AndreasK Autor
I finished the base paint and did some chipping with chipping fluid on the wing roots.

Arnold Mertens
nice work. Like the marbling effect before applying the camo pattern

AndreasK Autor
This build is done. Just in time for the Euro Model Expo on the weekend 🙂

Lorraine Lin
Looks really really great! good luck on the coming model show.
[img1]

Rui S
Beautiful work 👍

AndreasK Autor
Thank you!

Neuling
Very beautiful indeed!

Hans-Jürgen Haag
Nice 👍 super build job!

Spanjaard
beautiful job

Pietro De Angelis
Beautiful work,
congrats!

Nicolas
Following

AndreasK Autor
Cockpit detailing finished and primed/RLM66
Started riveting with the new tool I bought at EME in Lingen

AndreasK Autor
Ok, riveting is time-consuming but also relaxing. I gave the wing a wash to check the result. Looking good so far. I just hope that it will be still visible after paint job

DerMattes
Looks really good!

Tony Tonov
Very nice, taking a seat 👍

Alec K
Impressive cockpit, following 👍

CaptGPF
Obscene level of detailing at such a scale - Definitely following!

Skyhiker
Looks good so far. The wires are a nice touch.

Łukasz Gliński
Wow, what a cockpit!

J35J
Great progress!👍🏻

AndreasK Autor
Made some progress on the small E381 fighter to be carried by the 234.

AndreasK Autor
Finished the E381. Just some light panel line wash, no chipping or fading, as this was more or less a one-time flyer...

AndreasK Autor
Today I began the painting process for the 234. Sprayed RLM66 on the canopy and also used this for preshading of the upperside. Preshading of the underside was done with Intermediate Blue. I tried these colours instead of the usual black to obtain less contrast to the base coats and make it blend better. Hopefully...

Alec K
Very nice progress 👍

Finn
Following

AndreasK Autor
3 hours of masking the splinter camo. I hope I did not forget anything 😱

AndreasK Autor
With the engine outlets and canopy frames done, painting comes to an end. Especially the latter was very tedious in terms of masking. But I am satisfied with the result 😃

AndreasK Autor
Decals are on. Next step panel line wash to bring out all the rivets I made.

Alexander Grivonev
Geiles Ding, will den auch bauen👍 Great cockpit detailing!

AndreasK Autor
I finished this model 🥳

Alec K
Very well done, congrats 👍

Skyhiker
Looks good. Nice one for your collection.

Łukasz Gliński
The finish is as excellent as the cockpit 👍

J35J
Looking great! 👍🏻

Nicolas
Congrats, the Arado looks great. 👍

CaptGPF
That camo work is wicked! Love it!

Jan Peters
Beautiful work! 👏🏻👏🏻

Guy Rump
Lovely job! 👍

William Joel
Very nice. Amazing detail on the cockpit, looks impressive.
I have 2 old Ar 234 in progress, but the cockpits, or should I say lack of, that came with the kit just don't compare. I did a bit of scratch building, but just so something could be seen.
Question - what size wire did you use for the cockpit?

ΔΠ
Very beautiful model! I really like it, especially the riveting and the cockpit. Did you treat the cockpit windows in any way, or are they straight out of the box? That would surprise me with Revell, to be honest 😉

AndreasK Autor
The canopy had some scratches, so I sanded and polished it a bit.

@William: it is copper wire, but I do not know the size. I will measure it and get back to you.

@all: thanks for the nice comments ❤️

Jakub Fiala
Very nice!

Neuling
Interesting and well done!

AndreasK Autor
Thanks guys!

AndreasK Autor
@William: I realized that I still owe you an answer regarding the copper wire: it is 0.1 mm in diameter.

Spanjaard
missed this beauty before, congratulations on a well deserved medal

Łukasz Gliński
Well deserved indeed 👍

gorby
WOW, WOW and a couple of extra WOW's!
Amazing result Frank. Without doubt the best Golblin model I've ever seen.
I bet Halberd Models would love to use your photos for their marketing.

Mojo DeVirus
OUTSTANDING !!!

Augie
Really well done 🙂 superb work.

Thomas Haberl - TH SCALE MODELS
It looks so weird but very nicely done - superb craftmanship 😆

Ben M
Very well built and finished. I wonder how they ever thought this would be a viable fighter.

Marcel Klemmer
Well done👍

J35J
Excellent build & paint work!👍🏻

Bozo
beautiful goblin

Dave
Great looking Goblin. Your work and detailing are outstanding.

Spanjaard
in quite a few museums, it would not look that good 😉

Hans-Jürgen Haag
Excelent work, the original egg plane🥰

Kenneth
Perfekt 👍👍👍

Jan Peters
Beautiful finish 👍🏻👍🏻

Petr Kreps
Love it😉

bughunter Autor
Thank you very much mates!
I added two new pictures with the protection bow and securing fabric belt. I added also dust pigments to the wheels what I forgot before.

Alec K
Outstanding work in traditional Bughunter style! And done, in what I find, an unbelievable time frame 👍

Alberto
Fantastic work!

Zbynek Honzik
Alec K said it for me. There's nothing to add. 👏👏👏👏👏👏👏👏👏
Actually I have something to add - great photos! 👍

Robert Podkoński
Beautiful! I can only echo Alec K as well.

Christoph Kunz
Oh yeah, just to cool. 👍

bughunter Autor
What a wonderful feedback - Thank you very much to each of you 👍
gorby - your guess was right! It will appear on the Facebook page of Halberd Models 🙂
Yes Alec, I've been working on it all day - 24 hours a day! And because there wasn't enough time, I added the night. 😎 Joking aside, yes I spend a lot of time. And this winter was very warm here without snow/ice, so my airbrush sessions was not blocked by the iced roof window.

Kyle DeHart
Of course I had to come over and check out the glamour photos. Beautiful build and wonderful photography, as always. Such a cool build of a really unique subject

Jennifer Franklin
The photos are well done to show off this stunning and unique build.

Ludvík Kružík
Frank, you did a great job! I have no choice but to agree with the previous posts. And frankly, when your name appears on a project, we know in advance what kind of result we can expect 😉

Congratulations on the successful completion of this interesting model!

Martin Weinpold
Nice!

Bart Goesaert
Oh boy... I hope I can get my special hobby somewhere near this... a real stunner

Skyhiker
Excellent work as usual. I still think this is an ugly plane though. Whoever designed it must have been on a bad trip.

bughunter Autor
Another big Thank you all for your kind words!

@Skyhiker The design was made under strict requirements: it had to fit into the bomb bay of the B-36! Therefore folded wings were a must, the multiple control surfaces at the tail as well and of course the hook is the visible area of the pilot. It also needs actuators for the wing and hook, four guns with ammunition and fuel, all of which need space in the short fuselage - so there was no other way than this egg design. The design was good enough to achieve good performance figures - the "only" problem was the strong turbulence from the mother plane, so it was assumed that a normal pilot would not be able to hook on back.

gorby
That's one of the reasons it's one of my favourite aircraft. It's remarkable they managed to fit so much into such a small aircraft. I think it's an amazing design.

bughunter Autor
gorby, the unique design and the look (together with the carrier) invited me to buy and tackle this kit.

If anyone would like to see this model live - this weekend is your chance! I will be showing it, along with others, at my club's exhibition in Ergolding here:
11. Bayerische Modellbautage (15. and 16. March, Ergolding DE)
It would be nice to see you there!

David Taylor
Exellent job Bughunter.

bughunter Autor
Thank you David!

Bernhard Schrock
Very remarkable model! Very realistic finish.

bughunter Autor
Thank you Bernhard! Coming from a master like you this means a lot!
Do you want to see it on the EME in Lingen?

Jennifer Franklin
I absolutely love it. It is such an odd subject but you certainly did it justice.

Bernhard Schrock
I would love to see your flying egg in Lingen. 🙂🙂

Stefan Fraundorfer
Incredibly great work Frank, as always.

Neuling
Same as Stefan!

Neil
Stunning! And unusual 👏

Juergen Klinglhuber
super 👍

bughunter Autor
Thank you very much mates!
The little Goblin aroused a certain amount of interest at the exhibition today so it will travel with me to the EME 😉

Desert Marlin
Beautiful work!

Tom Spiegelberg
Echt toll geworden! Bringst du die auch nach Lingen mit?

bughunter Autor
Thanks mates!
Yes Tom, this little jet will be there!
After coming home from our exhibition this evening, I decided to leave my models packed up for the EME in Lingen.

bughunter Autor
It looks like I was the first one who finished the 1:48 version of the kit, so this model is now also on the Facebook page of Halberd Models, together with link to Scalemates 👍 And I got a very very kind feedback. Thanks to the folks at Halberd Models for creating this kit!

Kyle DeHart
That is very cool Frank!! First one. And you've set the bar extremely high!!

bughunter Autor
Kyle, I hope, it will generate more interest and I'm sure some more will follow, may be more in 1:32.

Kyle DeHart
I am following along with a 1/32 build on our forum at the moment!! Also very neat to follow along with.

Guy Rump
Wow!!! 👍

bughunter Autor
Thank you Guy!

Hans-Jürgen Haag
I love it!😍

Michael Kohl
Excellent result. All that detail work shines

Sebastian Meyner
Excellent work mate 👍

bughunter Autor
Thank you very much for your lovely comments!
Michael, perhaps you weren't expecting such a topic from my bench, but I have broadened my interests a little 🙂

John
How did I miss this one before? Amazing result bughunter! Your work with intricate tiny details always makes me green with envy. I get fumble fingers trying to put things like tiny PE buckles on and you make it look easy.

bughunter Autor
Thank you John four your comment!
It's clear that you can easily overlook a jet project if you only expect biplanes from me 😉

Robert Podkoński
Congrats!

bughunter Autor
After a great weekend at the Euro Model Expo in Lingen, I'm now back home after a long trip.
The little Goblin won the gold medal for 1:48 aircraft in the Master class in the Euro Model Expo 2025 contest. 🙂

Skyhiker
A well deserved award. Congratulations!

Neuling
Congrats! Well deserved!

J35J
Hat's off! Congrats!👏🏼

gorby
Very well deserved award Frank. Well done.

Kenneth
Herzlichen Glückwunsch and congratulations, very well deserved 👍🍾👍🍾

Zbynek Honzik
Well deserved award for this masterpiece! Congratulations!

scalemates
what a beauty!

Desert Marlin
Congratulations!!! This is is absolutely deserved!!!

Dave
Congrats on your award and a beautiful build.

bughunter Autor
Many thanks to you all for these kind words!
@Tim Many thanks for the visit to my booth, the discussions and the opportunity to explain my models. It was a pleasure!

Spanjaard
congratulations!

Kyle DeHart
Many congratulations!

Lorraine Lin
Congrats!

Rui
Congratulations 🥇

Jay Dubya
TBH - no remotely surprising Mr Bug, all your work is stellar! Well done, Sir

Jennifer Franklin
Congratulations!!

Ben M
Really enjoyed this one; good to see you getting recognition for a jet!

Hans-Jürgen Haag
Congratulations 👍👍👍

Sebastian Meyner
Congratulations!!! Very well deserved 👍

Martin Weinpold
Yes...

Agrippa
That one actually existed, and it looks amazingly like an Egg kit. Very nicely done, I like it! Thanks for showing it.

Bernhard Schrock
I had the opportunity to see the model live in Lingen last weekend. It is a piece of jewelry and it can even fly! 🙂

Alec K
Dang, major fomo here… congratulations on the recognition, it is certainly deserved 👍

John
Well deserved award, Frank! 👍

Agrippa 😄 that leads to the question of what would an egg plane kit of this already egg shaped plane look like?

David Taylor
Well done.

bughunter Autor
OMG mates, your overwhelming feedback leaves me speechless! Thank you very much to everyone ❤️️
@John and Agrippa: an egg of an egg - does its end as ball? 😄

Ludvík Kružík
Frank, congratulations! And I wish you this award! Without any doubt, it is well deserved.

Desert Marlin
Without a doubt, the XP-85 is the original Egg Plane!

Christoph Kunz
Auch von mir noch einen herzlichen Glückwunsch zur Goldmedaille.

Bob Hall
The high king of American Muscle, all hail king Shelby !

Desert Marlin
Looking forward to this one coming together!!!

George Williams
Looking good.

Hans-Jürgen Haag
Nice build 😍

gorby
Excellent job!

Fritz01
Nice paintjob!

subotai
Hi, looking good and nothing to complain about. I would just recommend to clean and blend in your wash a bit.
I´m using the same varnish and it doesn´t feel that smooth most time so im probably doing something wrong myself.
So sometimes im using 3000er sandpaper after it. What color did you use? I want to build a Merkava sometime "soon" too.

Moewe Autor
Thanks mate,
I used the Vallejo 044 Gray RLM02. I think it's actually a gray meant for German WW2 fighters, but I really like the final look of it.

Lost_Erik
Welcome. 👍
It is a fun kit and you have done well with it!

Villiers de Vos
Very nice work.

gorby
😄 😄 😄
What am I going to pointlessly stretch over a candle now? 😮

In other news, from Airfix:
uk.airfix.com/commun..ews/surprise-release

And even bigger (or smaller) news from Hornby:
uk.hornby.com/commun..l-railway-experience

Alec K
Very interesting.

Dave
Nice Build.

Rui S
Beautifully done. An eye catcher 👍

gorby
Excellent!

Martin Weinpold
Wow, fantastic!

Lorraine Lin
Beautiful cat
[img1]

John Mulhall
Great work Paul. The sky overspray on the invasion stripes is awesome!

Never a Pro
impeccable weathering

Paul Bowers Autor
Thank you all for the kind comments and compliments. I'm so happy with how it came out.

Thomas Bischoff
I'm in - nice show 👍

Sergej I
Looking good 👍!

Rich K.
Awesome work! Learning a lot from your posts and looking forward to the final result!

CaptGPF Autor
Thank you everyone!

@Thomas! Looking forward so seeing your Douglas build!
@Sergej- your F-35 is looking good! I heard that was a bad kit, but didn't realize it till your post!
@Lorraine - Your builds are always amazing! Using a laser cutter to create your latest Spitfire is brilliant!
@Rich - looking forward to seeing another dual build with you and your wife!

Dietmar Bogatzki
Fantastic start Capt. 👍

CaptGPF Autor
Thank you Dietmar! I plan to have the maintenance hatches open on this puppy, but not as impressive as your cut-out Millenium Falcon!

CaptGPF Autor
Sloooooooow progress, the main painting is done, now onto the munitions!