Wiadomości
Edouard Carrdodał nowy album.
17 zdjęć/zdjęcia
Iron Maiden - Aces High
1:32
Box contents
Projekt: Iron Maiden Aces High
3 12 August, 17:43
Edouard CarrHey Villiers/Christoph - hope you enjoy the build and thanks for watching the progress. Thinking about a custom paint job on the second spitfire with reference to the album power slave of which Aces High is from. Have some home print decal sheets that I have been meaning to use for years so might try testing them out. Revell have been kind enough to send a second Eddie Sprue so will have him seated in both planes when completed.
18 August, 19:11
Nagy-Meszler Csabadodał nowy album.
17 22 August, 10:06
Nagy-Meszler CsabaThe cockpit is very puritanical, but unfortunately there is not enough documentation on it. The fit of the parts is very poor and needs a lot of filling and sanding.
22 August, 10:10
komorasMy biggest issue was fitting the seat and the mid portion of the wheel bay, had to add 1 mm plastic card on both sides. Looking forward seeing it done! 👍
22 August, 13:23
Nagy-Meszler Csabakomoras, I encountered the same problem: the landing gear bay cannot be fitted where it is intended. I used a milling head to remove enough of it to fit.
23 August, 06:05
gorbyInteresting aircraft, interesting build.
Incidentally, I would suggest 'Spartan' as a better way to describe the cockpit rather than 'puritanical'. 👍
25 August, 08:55
Nagy-Meszler CsabaFinished. Unfortunately it has a few mistakes, but an interesting item for my collection.
26 August, 20:14
Andrew dysonposiada ten przedmiot
PEUGEOT 206 WRC Ypres Westhoek Rally 2001 - including 4 resin wheels
Renaissance 1:24
TK24/099 (TK 24/99) 26 August, 20:13
schlicki2dodał nowy album.
11 zdjęć/zdjęcia
King Tiger Production Turret
1:35
Projekt: King Tiger Production Turret
12 28 July, 09:52
capt. Rchciałby nabyć ten przedmiot
North-American B-25C/D Mitchell Landing Gear & Ballast (for Airfix)
Scale Aircraft Conversions 1:72
72156 2018 26 August, 20:10
Francois Royer de Vericourtdodał nowy album.
65 zdjęć/zdjęcia
French Army Ferret Mk2 1/35
1:35
Projekt: French Army Ferret Mk2 1/35
19 21 May, 12:13
Francois Royer de VericourtMy intention is to do a véhicule used by a French paratroop regiment in Algeria.
Not certain of what tires they had ; may have changes depending on the periode ans the area of operation..
5 August, 22:12
Francois Royer de VericourtThe Edouard set is nice but requires somme additional scratch.
If one intends toi leave hatches closes, then Eduard set isn't realy required.
8 August, 07:04
David TaylorI have the interior set from Scorpion miniature models which is a very comprehensive set.
8 August, 18:16
Francois Royer de VericourtCould you share some pictures of the kit or the instructions ?
8 August, 21:18
David TaylorHi Francois.If you go to my stash list its all there.Failing that Scorpion Miniature models.
9 August, 15:43
Francois Royer de VericourtFound the instructions, thanks. They are going to be helpful for m'y scratch building and painting.
9 August, 18:08
Master Box 
CasModelerdodał nowy album.
9 2 August, 04:14
yngvenettFollowing this to learn. If possible, please include some pictures of how you make the rear lights and blinkers look realistic. I'm really struggling with it 🙈
25 August, 10:18
CasModeler1. Lights. You have to paint it using clear paints and rapid thinner. (dry coats high psi 20-25. )Then dip it into floor varnish. It makes clear parts more transparent. The last thing will be to glue a transparent film(foil)on the back of the lights. for example hasegawa mirror finish.
25 August, 13:53
István SzücsGreat work so far! The dash is amazing, the chassis looks like the real one!
25 August, 18:44
CasModeler@Istvan
Anyway, not my best build. Paint job is not perfect because I experimented with thin coats and unfortunately metallic coat is too thin.
26 August, 06:27
yngvenett@CasModeler Thank you for your reply and good advice. It's very nice how the community of experienced builders help with knowledge. We don't have the floor varnish available here (Norway, Europe), but I will look for an alternative 👍
26 August, 06:46
CasModelerI forgot mentiom aboit the glue. Use only rubber-based clear adhesive otherwise clear part will be fogged.
26 August, 08:07
CasModelerThere is a problem with floor varnish. I had to overpay and imported from USA that one.
26 August, 09:29
yngvenett@CasModeler
Thanks again and also for information about the glue. I'll make sure to get the right stuff
26 August, 16:28
István Szücs@yngvenett: try the orange Gauzy! It's a shine enhancer for the clear parts.
26 August, 20:06
★ Starfish ★dodał nowy album.
48 5 June, 13:13
★ Starfish ★As usual, a full build video with all details can be found on my channel: Youtube Video
17 August, 18:02
DerMattesGreat build, but I was surprised by the quality issues. Seems like these kits are from old molds, not the recent double seater ones.
17 August, 21:23
★ Starfish ★@Mattes Danke! According to scalemates, these molds are from 1991. Hopefully, the Revell, Hasegawa and GWH kits I have are better ☺️
17 August, 21:49
CaptGPFBeautiful twins! Loved the build video which highlighted your… challenges with the kits!
26 August, 19:27
Ken Kolenovskyposiada ten przedmiot
U.S. Half-tracks Part 2 The development and deployment of the U.S. Army's half-track...
David Doyle
2015 26 August, 20:05
Kesa TihoSo recently i got an idea. Estonia has an air force, and an air force has planes, there is most likely a model for every single military plane ever made, so i checked google and found a model of a Aero L-39 Albatros. The EAF (estonian air force) uses one. So i thought it would just be cool if i could build a Aero L-39 Albatros but instead of using the given decals i somehow create EAF decals for the L-39. So just wondering if anyone knows or can make decals for planes. (Sorry for rambling again i just had one of those 3 am thoughs that even Einstein would be perplexed by)
26 August, 20:04
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pl
35
35
/pl/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo