Wiadomości

Rando
Awesome 👍 how will you do the decals?

Tom Spiegelberg
Good question. The serial numbers are on the Furball Mig Master decal sheet. The other decals will come from other decal sheets and will also be painted.
The conversion kit from CAT4 looks great and is a big help for these project. It´s better than die Cutting Edge conversion kit.

Rando
That's awesome. CAT4 also released a decal sheet for a VF-32 F-8D, maybe possible you could use that one. I'm cobbling together decals from the kit and Furball sheet on my RF-8 right now, I totally appreciate that creativity. I myself am super stoked about the CAT4 kit, gonna backdate so many Crusaders.

Tom Spiegelberg
I also orderd the decal sheet from CAT4. The F-8D version on the sheet is great! Today I cut the wing top from the kit and made a test fitting with the new wing top from CAT4.The fitting is great. Much more better than the wing top from Cutting Edge. I also want to make a RF-8a from the USS Saratoga.
I´ll take some photos from the sets during the next days.

Rando
Can't wait to see. What do you think of the nose shape? I ordered their sheets too.

Tom Spiegelberg
I think that the nose shape is correct. I just ordered the new Vought ejection seat from CAT4 for my Crusader. After my holydays I can start my build.

Rando
Before you get started, check out this correction which was released by the manufacturer:
CAT4 1:48 F-8 Crusader conversion - first look | Album by Rando (1:48)
I was given this through the eBay supplier and I also spoke to the maker directly
Bit concerning but hopefully the nose still fits together with a good shape

Robert Podkoński
Awesome job!

Neuling
A masterpiece.

gorby
Fantastic!

Michael Kohl
I can only agree. Like it a lot.

Doubtingmango
Beautiful Duck! Love the water effects and buoy!

Grant Dalzell
Thanks everyone 👍

Spanjaard
awesome!! just love it

Roland Sachsenhofer
This project has been waiting long enough, now the time has come! The "shell", seen here, is quickly put together, the glued seams are still wet, so to speak. I plan to show the A90 in a proper dio - gliding just above the water!

Michael Kohl
One one those weird sovjet constructions. Will be fun to follow.

Roland Sachsenhofer
Oh yes, Weird and.... big. That must have been a massive vehicle!

Ben M
watching

Skyhiker
Neat

Roland Sachsenhofer
Feel very welcome! 🙂

Treehugger
I just remembered, I have this kit in my stash.
Are those windows on the side? Like on passenger jets?

Roland Sachsenhofer
If this was some kind of passenger aircraft, I would book a flight for sure. 🙂
I will drill the windows and fill them with Krystal Klear.

Raz1
No windows, apparently.

See en.wikipedia.org/wiki/A-90_Orlyonok

Dave Flitton
Watching!!

Roland Sachsenhofer
Thank you both for interest and comments! Well, I will think over with that windows.... Thank you for the link!

Skyhiker
Looks to me like there are windows in that Wikipedia photo.

Raz1
I stand corrected. I had originally not seen the windows. Thanks, Skyhiker.

Plenty of interior photos here: flickr.com/photos/la..597/with/45021731405

And the last surviving example (per Wikipedia) is here: museum-vmf.ru/

Even though the appropriate page won't load here, a photo displays in the top-of-page banner rotation.

Skyhiker
Wow, those interior shots are incredible.

Roland Sachsenhofer
I agree, what pictures! The question of the windows should now also be answered "from the inside" as well. Thanks for these excellent links, mates!

Roland Sachsenhofer
A few new pictures here too: the finished pre-shading has shown a few touch-up needs, but tomorrow I want to be able to apply the surface colour!

Michael Kohl
Probably too late, but that project would have been perfect to try a levitation display.
amazon.de/Magnetic-L..aps%2C127&sr=8-3

Roland Sachsenhofer
I think it's a really wonderful idea.... A few Star Wars themes are in the making, possibly here: I would also like to see a Tie-Fighter hovering over this base.

A nice encounter - magnets are actually being used in this project! Since I want to show the "Orlyonok" gliding over a water surface as well as standing still, I have prepared two versions of the props. In order to be able to change them stably, I attached magnets to the axis of rotation. The one on the engine was inserted through a hole from the outside. It sits on the tip of a toothpick, which has been inserted through the hole in the inside of the engine. The magnet now sits exactly in the centre of the engine diameter. The second magnet only had to be glued to the two ends of the propeller axles. Now, it works perfectly with a soft "click"! 🙂

Łukasz Gliński
Interesting project, will follow

Robert Podkoński
Following for sure. It is a great idea to use magnets.

Roland Sachsenhofer
Thank you mates for interest ans motivation!

Roland Sachsenhofer
The Oryonok still looks a bit 'artificial', but in principle shows its surface colours, which will hopefully breathe a little life into it, are the traces of use and wear that I will still apply. The windows on the fuselage will of course also be drilled out and filled with clear white glue.
At the same time, the water base is now being worked on. This time I'm using a light filler on a polystyrene base as a base for this, with Vallejo water gel on top.
The magnetically interchangeable ahrwerk and propeller have worked - which is great news of course!

Skyhiker
That's moving along fast.

Roland Sachsenhofer
Thank you mate!

Roland Sachsenhofer
A few pictures of the water base in the making: I'm using a new material to build up the water surface. This so-called 'light filler' dries within 24 hours and is easy to shape with the appropriate tools - here with a simple brush

Robert Podkoński
Just a suggestion, Roland - an ekranoplan flying above the sea 'irons out' the waves under its wings in a characteristic manner:
oldmachinepress.com/..rlyonok-ekranoplans/

Roland Sachsenhofer
Robert, thank you for that important hint, I wasn't aware of this!

Roland Sachsenhofer
....and thank you for the excellent link as well!

Robert Podkoński
I am just happy to be of any assistance to you, Roland 🙂

Roland Sachsenhofer
Robert, your hint made me to rethink and rebuild the whole thing a bit: the strip of water flown over is no longer deeply furrowed, but has been flattened - the picture material helped a lot.
You can see the whole thing now primed with Tamiya acrylic paint and coloured once, tomorrow transparent water gel from AK will be applied...

Guy Rump
Looking good, following. 👍

Roland Sachsenhofer
Appreciated! 🙂

Robert Podkoński
Water looks already like on these photos, Roland. I cannot wait to see the plane levitating above the waves...

Roland Sachsenhofer
That´s motivating! 🙂

gorby
The water effect is very convincing!

Neuling
Yes

Roland Sachsenhofer
Thank you mates! Very appreciated!

Roland Sachsenhofer
Before I continue with pictures of the water base that was completed today, I'll show you a few snapshots of the completed 'Orlyonok'. As you know, I made it with interchangeable modules for both a land and a flying display; here you can see the 'land version'.
Tomorrow there will certainly be an opportunity to catch the aircraft flying by and photograph it in flight. 🙂

Skyhiker
Looks fantastic!

Ben M
very realistic. the weathering and the land diorama came out perfectly. can't wait to see it on the water!

gorby
I didn't know it had an undercarriage. The photos make it look like a very impressive beast.

Robert Podkoński
Fantastic job, Roland! (@gorby - it should be rather caller a beaching gear, imho, as it was used only to maneuvre on terra firma).

gorby
Thanks Robert.

Roland Sachsenhofer
Mates, a great 'thank you' for your kind and motivating words! Very appreciated of course!