M50 A1 Ontos Finished
Komentarzy
20 January 2013, 10:15
Philip De KeyserAAAAAAwesome job Markus, got no words for this, to busy with look at it😉
20 January 2013, 10:37
Steve WilsonI remember that being a glint in your eye Markus!!! Awesome build well done 👍👍👍
20 January 2013, 11:37
Kim BrandersA monster markus, excellent, amazing. You are the best. Grtz Kim.
20 January 2013, 12:05
Aghis BarberopoulosWhat can I say but repeat myself: Amazing detail, realistic weathering... Well done again Markus, and thanks for the inspiring works !
20 January 2013, 12:09
Frank Krause...................my predecessors used up all the words I wanted to use! 🙁
Markus: Simply great job! 👍 The red Vietnam dirt comes out well. Looking forward to see the Ontos in a dio...😉
20 January 2013, 12:31
Dirk HeyerMmmmh,
that`s pleasure for the eyes!
The painting of this model tell us a story! To achieve a model with a character is not the easy way, but it is this which banishes us to the model!
I like all the textures, the deep of all coutours and it makes me knocking on the model, only to hear the steel and to smell the gasoline!! Wow!
You have achieved all of my senses....Great stuff my friend!
Greetz Dirk
20 January 2013, 18:09
AckiHi Markus, this one is not my theme, but what I see is phantastic. So cool!
20 January 2013, 18:40
Markus Kutsch The Plastic BenchThanks Mates for your great ,great comments !!
(Blush) 😄
21 January 2013, 07:27
Holger KranichThis is modeling in its purest way! Thanks for showing this beauty to us! Unbelieveable... 👍
21 January 2013, 07:48
Markus Kutsch The Plastic BenchThank you ,Mate
This week i try to make the Sandbags for the right front.And if all went well,i begin with the Crew!
21 January 2013, 11:29
Frank KrauseCrew sounds good! Could you take some picture of the different steps of painting the figures? You know, I have some more things to learn...😉
21 January 2013, 12:48
Siegfried MühlnikelWell Markus, this doesn't look bad at all. In fact I would say: "Very well done!" Good Job.
21 January 2013, 13:03
Julien MoyaertsThis really looks dirty and old... great job!!!! And the tank is just brutal, I love it ^^ Is this kit easy to build?
21 January 2013, 13:16
Markus Kutsch The Plastic Bench@Frank
My friend ,i will try to take some pics.But most of my results (especially in figure painting) are almost try and error😉
I overdo (rework) the piece iam working on ca.20 times until it looks right (in my opinion).I will try it but dont expect to much!!
@Julien
I think its a good kit .There is no interior.The build of the six gun section is a little tricky.A gun is made of three main parts and its a little tricky to align them at the right angle with the tracer gun on Top ( now i know how i get it better ).
Again thanks Mates for your great comments.
21 January 2013, 13:47
Markus Kutsch The Plastic Bench@Julien
Here is a review that describes the Kit very well!
21 January 2013, 19:14
Holger KranichÄh, Markus! Is it possible that you maybe have forgotten something?8)
21 January 2013, 20:00
AugieHehe Watch this space.. I have a idea i am trying out for surfboards... if it works i can mass produce them.. all you guys will need to do is paint them
21 January 2013, 20:30
Frank Krause@Markus: Could Holger mean the link of the review...?
@Augie: May I order 2...?😉
21 January 2013, 20:37
AugieLol course you can frank, once i have then done .. will get an album up for you guys to choose
21 January 2013, 20:37
Markus Kutsch The Plastic BenchAuweia!!!
Here is the link 🙂
missing-lynx.com/rev..13218reviewcs_1.html
21 January 2013, 20:45
Markus Kutsch The Plastic Bench😄
I hope Augie will have time to finish a (or more for us guys) board .
But she is a busy lady.
21 January 2013, 20:54
Holger KranichI always keep an eye on our surferboys and their boards! And I created a decal for the surfboard, customly!
21 January 2013, 20:59
Markus Kutsch The Plastic BenchDoes anybody know if there is a M551 Sheridan in design from another manufactor??????
I got the chance to get one from Academy ,but it has much flaws in Reviews i read.!
22 January 2013, 07:40
Frank KrauseHi Markus, as I know the Academy one is the best Hseridan. The Tamiya one...? I guess not. Despite all these reviews - I wouldn't be able to able to tell the difference between a corrected model and the Academy kit, if I would only look at the model. Go for it!
22 January 2013, 07:51
Markus Kutsch The Plastic BenchThanks Mates
I knew there was one from Tamiya.I think the Academy is the better choice,too.
But i wanted to be free from suprises.Just when i start this Kit with all PE ,some other manufatur wil come around with a new one (perhaps AFV).That would make me angry 🙁
Same happened with the M16 Halftrack.
22 January 2013, 07:58
Frank KrauseMeng is also good for a surprise, but I think there is no new Sheridan around the corner in short or mid term.
22 January 2013, 08:00
Markus Kutsch The Plastic BenchJust a quick shot from the Sandbags done (only one lamp)!
When dry ,paint on.
From pic.21
22 January 2013, 11:15
Frank KrauseLove the sandbags. How did you create them? (Photos, photos, photos... want to learn... No. 5 needs input, input...)😉
22 January 2013, 12:26
Frank KrauseForgot - upper and lower hull not fixed yet, right? If already fixed, how do paint the driver's figur without problems then?
22 January 2013, 12:27
Markus Kutsch The Plastic BenchI made them of Apoxie Sculpt [img1]
It was the first time.It works pretty well.Used talcum powder for not sticking it to workplace.Smooth it with water.I think its better for such things then Green Stuff (Green Stuff is great for making Tarps ,Bedrolls,lace ect. )
Rolled cigar shaped and cut it into 1cm pieces.Formed it with fingers to its shape.
22 January 2013, 12:34
Markus Kutsch The Plastic BenchThe driver is not fixed.It can be positioned through the opening for the commander when lifting off the turret section.The driver sits on a piece of evergreen profile 🙂
22 January 2013, 12:37
Markus Kutsch The Plastic BenchSandbags painted (pics follow)
@Frank
To avoid fingerprints use disposable gloves,but a brush dipped in water helps too.
Not to much or its soon wet clay!!
The time to work with the Apoxie is very long.If it dont succeed at first just knead it together again.
The acrylic paint does stick to it without priming first!
22 January 2013, 16:21
Markus Kutsch The Plastic BenchThank you Mates very much.
@Uncle Chop Chop
Dirk Heyer said once it looks like a thing from a Games Workshop designer.
The VC where breaking out a little bit in panic by only to see this "Thing"
1 February 2013, 10:37
uncle chop chopyea if i seen this thing brake out the jungle ill drop dead on the spot or swap my ak47 for a bazzoka
1 February 2013, 21:09
Markus Kutsch The Plastic Bench@Holger
Yes,Mate.Its a small and low priced set.But the results are great.The pics are taken with my small compact digi cam.
3 February 2013, 08:32
Album info
Hi Mates
This is the finished one. Only the Crew is missing.
