Eduard Fokker Dr.I -Complete

1
January 9, 2017
Completed kit, will add white box photos in a week.
2
January 9, 2017
3
January 8, 2017
4
January 6, 2017
Only a little progress tonight. I used testor non buffing aluminum lacquer instead of alclad. For the brass I mixed a 13:3 of tamiya chrome silver and gold leaf
5
January 5, 2017
"red"y to proceed!
6
January 2, 2017
Mix for attempting faux leather; tamiya flat brown with a drop of black, probably 8:1 and then desert yellow with a drop of orange and two drops of red brown; probably 9:1:2
7
January 2, 2017
Seat so tiny! Turned out great. First tamiya red brown, then covered with clear orange. Drybrushed with the dark brown mix, touched the highlights and edges with the yellow mix then blended again with the dark brown. Covered with future floor polish. Look
8
January 2, 2017
9
January 2, 2017
First time I've ever tried making faux wood. Not to bad considering how tiny this area is.
10
January 2, 2017
11
January 2, 2017
12
January 3, 2017
Bondic is so cool for dials like this
13
January 3, 2017
14
January 3, 2017
15
January 3, 2017
Tiny fabric seat belts!
16
January 3, 2017
17
January 3, 2017
18
January 3, 2017
19
January 3, 2017
I wound up breaking off the side dial I made and trimmed it down.
20
January 3, 2017
Some work to hide seams, but it fits together decent well considering there are some gaps and the guides for the interior parts are not very good.
21
January 4, 2017
22
January 4, 2017
23
January 4, 2017
24
January 4, 2017
25
January 4, 2017
Tonight, should be ready for Primer!
26
January 5, 2017
1:48 Dr.I compared to 1:24 Dr.I I'll build later
27
January 5, 2017
28
January 5, 2017
so I didn't do a lot of color modulation or panel/seam line detail. I've had the benefit of seeing lots of restored WWI fighters at the Boeing museum in Seattle and they are very homogeneous. I did, however, add forced shadows under the stabilizers/wings
29
January 5, 2017
30
January 5, 2017
this took a _LOT_ of red paint
31
January 8, 2017
32
January 8, 2017
33
January 8, 2017
34
January 8, 2017
35
January 8, 2017
36
January 8, 2017
37
January 8, 2017
38
January 8, 2017
39
January 8, 2017
40
January 8, 2017
41
January 9, 2017
42
January 9, 2017
43
January 9, 2017
44
January 9, 2017
45
February 5, 2017
46
February 5, 2017
47
February 5, 2017
48
February 5, 2017

Komentarzy

1 2 January 2017, 23:50

gorby
Looks good so far Nathan. I'm impressed with the wood effect.

4 January 2017, 16:38

Nathan Camarillo
Thanks! It's very tiny. This was my test kit before I jump to a 1:32 scale Fokker Dr.I. I've never tried making faux leather or wood grain before.

4 January 2017, 20:30

Lex Jassies
I think this will going to be a little gem!

5 January 2017, 08:28

gorby
Even more impressive if it's you first attempt at wood effect Nathan. I'm doing it for the first time as well (on a Raiden propeller) but as I only have one brown oil paint, I'm attempting to do it with dry brushing acrylics. Your 'leather' also looks good - I have tried doing leather once before using the 'tissue' method, to give the plastic some texture - with mixed results, probably need more practise. I have made a note of your paining method and will definitely try it out next time, so thanks.

5 January 2017, 15:42

Nathan Camarillo
I'll let you know how the propeller goes, and try to document the process

6 January 2017, 16:50

Nathan Camarillo
Propeller images have been added. All tamiya paints, I used desert yellow then cut small strips of masking tape with only a hairline gap. Then airbrushed red brown for the grain. I sealed with a 50/50 of clear yellow and clear orange, hand brushed on thick with a really soft brush. It worked great. The last step has been mounting the guns and I'll take some
Pics of the finished model soon.

8 January 2017, 23:22

gorby
The propeller has turned out very well Nathan. It helps that you've done it in Tamiya paints, because that is the only paint I have. It's only decent paint that is stocked in the local shops.

9 January 2017, 16:39