Mustang III Progress

1
June 17, 2018
Cockpit finished with some Eduard PE. I didn't use all of it as I prefer painting some of the stuff. I also added the wires on the radio equipment. I used 0.4 mm aluminium wire for that.
2
June 17, 2018
basic green color is Tamiya XF-71 Cockpit green.
3
June 17, 2018
4
June 17, 2018
5
June 17, 2018
Only the main instrument panel is Eduard PE, the rest of the instruments of the PE kit looked to flat, so I painted the kit parts instead.
6
June 17, 2018
I drilled the holes in the exhausts with a 0.6 mm drill.
7
June 17, 2018
Also the machine guns were drilled with a 0.6 mm drill.
8
June 17, 2018
9
June 17, 2018
Eduard PE in the wheel wells.
10
June 17, 2018
11
June 17, 2018
12
June 17, 2018
13
June 17, 2018
Eduard PE on the landing gear. Break lines will be added later on.
14
June 17, 2018
0.4 mm drilled hole in the antennae.
15
June 17, 2018
0.4 mm aluminium wire glued in with super glue (CA glue).
16
June 17, 2018
Antennae in place.
17
June 19, 2018
Riveting finished.
18
June 19, 2018
All the small parts painted, including the propeller.
19
June 19, 2018
I used Mr.Color Super Metallic SM01 for the bright metal parts and Mr.Color H76 on the exhaust pipes. The rest are Tamiya colors: XF-1, XF-7, XF-85, except for the yellow which is Mr.Color H329.
20
June 19, 2018
Pre-shading done.
21
June 19, 2018
First camo color, Tamiya XF-82.
22
June 19, 2018
Masking for the second color.
23
June 19, 2018
Camo finished! 🙂 Green color is Tamiya XF-81.
24
June 19, 2018
Color for the under side is Tamiya XF-80.
25
June 21, 2018
Clear coat on and all the small parts are finished.
26
June 21, 2018
Assembled the landing gear and added the break lines.
27
June 21, 2018
All decals on and another clear coat. Awaiting weathering.
28
June 21, 2018
Mustang III is finished! 🙂
29
June 21, 2018
30
June 21, 2018
31
June 21, 2018
32
June 21, 2018
33
June 21, 2018
34
June 21, 2018
35
June 21, 2018
36
June 21, 2018
37
June 21, 2018
38
June 21, 2018
39
June 21, 2018
40
June 21, 2018
41
June 21, 2018
42
June 21, 2018
43
June 21, 2018
44
June 21, 2018
45
June 21, 2018
46
June 21, 2018
47
June 21, 2018
48
June 21, 2018
I took a razor saw to the canopy and split it so I can open it and look inside. The kit came with an option to build it with an open canopy, but I like to be able to close it to prevent dust to get in.
49
June 21, 2018
50
June 21, 2018
51
June 21, 2018
52
June 21, 2018
Compared to another sharkmouth. 😉
53
June 21, 2018
Two mustangs. 😉

Komentarzy

2 17 June 2018, 11:25

Björn Svedberg
I've started the sharkmouthed Mustang III of the 112 squadron. I'm thinking of making this the first of many sharkmouthed planes from 112 squadron.

17 June 2018, 11:27

Gordon Sørensen
Great looking cockpit, Björn! Are the seat belts from Eduard too?

17 June 2018, 12:22

Björn Svedberg
Thanks Gordon! 🙂
Yes, they are part of the PE kit from Eduard.

17 June 2018, 12:34

Björn Svedberg
I've added some Eduard PE to the wheel wells and the landing gear, and then I decided to do the antennae wire. Just drill a 0.4 mm hole in the antennae and then glue some aluminium wire to it, simple!😉

17 June 2018, 17:29

Clifford Keesler
Looking very nice.

17 June 2018, 18:22

Björn Svedberg
Thank you Clifford! 🙂
I've now finished the riveting and the painting of all the small parts. Next will be masking and painting the camoflage.

19 June 2018, 09:51

Björn Svedberg
Basic camoflage is done, next will be a clear coat and decals. The sharkmouth is close now..😉

19 June 2018, 18:57

Alexander Perov
Good work, great temptation to roll rivet on the wing but, on the P-51 wing Gruntovalos and polished and riveting should not be visible

20 June 2018, 05:17

Palo G
woow . this looks great - cockpit, riveting, spraying work

20 June 2018, 06:00

Björn Svedberg
Thank you Alexander! 👍 I didn't know that, so I learned something new today 🙂. Well, it's done already, so I will take it as a learning experience for the next one.

20 June 2018, 07:54

Björn Svedberg
Thank you Palo! 🙂

20 June 2018, 07:55

Spanjaard
going really well Björn!

20 June 2018, 08:13

Björn Svedberg
Thank you Spanjaard! 🙂

20 June 2018, 11:50

Soeren R.
Fantastic work Björn - as usual😉

20 June 2018, 12:03

Clifford Keesler
It is looking awesome, can't wait to see her done.

20 June 2018, 17:35

Björn Svedberg
Thank you Sören and Clifford! More pictures coming tomorrow.😉

20 June 2018, 21:56

Kees Kleijwegt
Excellent work so far Björn!

21 June 2018, 20:55

Björn Svedberg
Thank you Kees! 🙂
The sharkmouthed Mustang III is finished. This kit was really nice to build. not alot of putty and sanding. I made a few mistakes along the way, as usual, but I'm pretty happy with the end result. 🙂

21 June 2018, 20:55

Clifford Keesler
Very nice Mustang, well done.

21 June 2018, 22:59

Björn Svedberg
Thank you Clifford! 🙂

22 June 2018, 07:16

Palo G
The Result Is Perfect !

22 June 2018, 08:52

Soeren R.
Fatastic work Björn!

22 June 2018, 09:05

Björn Svedberg
Thanks Mates! 🙂 I'm glad you like it.

22 June 2018, 11:00