The Little Sherman

1
July 19, 2018
There is still some PE left in the bag, but I'm happy with what is on now.
2
July 19, 2018
3
July 19, 2018
4
July 19, 2018
5
July 19, 2018
I added some styrene sheet to close the hull. Next will be some putty and sanding and a base coat.
6
July 19, 2018
7
July 20, 2018
I used XF-58 over XF-1 for the base color. details are painted with X-10, XF-56 and XF-59. The brown used for the handles of the machine gun is model master brown leather (I think.. I've re-bottled it.) Gloss coat is Super Clear III GX100 from Mr.Color.
8
July 21, 2018
The little Sherman is finished! 🙂
9
July 21, 2018
I used Mig's Airfield dust pigment for the dirt as it was the only one I have 😉.
10
July 21, 2018
Weathering was a mix of Tamiya panel liners, oil washes, oil paint and acrylic paint for the chipping and rust effect.
11
July 21, 2018
Final matt coat to seal everything in is Vallejo Matt Acrylic Varnish.
12
July 21, 2018
13
July 21, 2018
14
July 21, 2018
15
July 21, 2018
The decals are a bit thick as you can see on this photo, but when looking at it in real life it doesn't show that well. Front lights are Tamiya X-22 over X-11.
16
July 21, 2018
The radio antenna is a piece of stretched sprue.
17
July 21, 2018
The PE parts really enhanced the detail of the kit. Especially the machine gun.
18
July 21, 2018
I used 5 strands of 0.25mm copper wire that I twisted for the tow cable. The fasteners are part of the PE kit.
19
July 21, 2018
Rear light is Tamiya X-27 over X-11.
20
July 21, 2018
21
July 21, 2018
22
July 21, 2018
23
July 21, 2018

Komentarzy

2 19 July 2018, 13:18

Björn Svedberg
I'm back after a wonderful weekend at Duxford and Fairford to continue the build of the Sherman. I'm taking my time with this as it is my first tank. I hope I got all of the PE right.. I don't know what half of it is for. Guess I will have to do some research 😉.

19 July 2018, 13:21

Cortex
I am building this kit now, will be watching yours : )

20 July 2018, 02:16

Björn Svedberg
You are welcome Cortex 🙂.

20 July 2018, 07:05

Björn Svedberg
Todays work, I've laid down the base color and put on the decals and a protective gloss coat. Next will be the fun part, weathering! 😉.

20 July 2018, 19:21

Björn Svedberg
Thank you James! 🙂
The little tank is now finished, and I really enjoyed this build. A nice break from building planes 😉.

21 July 2018, 17:25

Björn Svedberg
Thanks again, James! 🙂 It was a nice little kit.

21 July 2018, 18:59