Iron Maiden Aces High Stageversion
Maybe I'll buy me some PE-Parts next year
Eddie taking seat for the first time. Left arm follows when I finish the cockpit.
The figure needed a few putty.
Revell should have produced this in clear plastics. So I used a drill and a knife to scoop out the glasses. After painting the frame i'll fill it with Humbrol Clearfix.
Starting with the seat.
I glued the parts F8 and F9 on the wrong sides, so I used Haulers PE-Saws to cut them off.
If you don't use too much glue, the barrs stay moveable.
I use a small wire to keep the cannula clean. Bending it and the cap fits nice.
Had to make a notch into the yahu-panel to glue the vizor.
No problems with building the engine.
testfiting of the fuselage and wings.
Just a little gap at the tail. Also no prob.
Today I started to paint Eddie
I also worked on the Cockpit
At this size the seat looks much worse than in reality. Macro bad 🙁
The sides of the Cockpit.
Testfitting - nice
What you can see...
Eddie is a big man, with big boots.
Testfitting, looks good.
I finished the Figure.
I had to cut off the pedals and needed to the reduce the size of his boots from 48 to 34.
Eddie isn't Eric Brown, so his arms are too long for the small Cockpit.
I just don't close the cockpit. 😉
I made a Hood from paper and tesaband to close the cockpit with Eddie inside. One moore time filling the gaps with putty and I can start the paintjob.
After using putty from Vallejo I sprayed a layer of Tamiya Flat Alu. Looks good to me.
Where wings and fuselage meet... I had to use putty and a lot of sanding, now the rivets are gone 🙁
As I want to build the Stageversion I needed a 4-blade-prop. Revells Abteilung X was very kind 🙂
Just some putty on 2 of 4
Just some putty on 2 of 4
I painted the panellines with Mr.Hobby Nr 81.
Took a long time just for this side and there's still the upper side.
Took a long time just for this side and there's still the upper side.
The landing gear oob. But I want to show the Spit in flying condition.
Doesn't fit, of course...
That's all I need + the tire.
and some milliput
Now it looks like this.
Long time, no see...
Doesn't look like much, but took me a really long time.
Doesn't look like much, but took me a really long time.
Looks ok for me. Only the underside of the cowling needs another thin layer of Vallejo 71302 Sky type S.
I don't know what it is.
The Dark Green from Vallejo mixed with original thinner. After a few minutes it looks like this?
The Dark Green from Vallejo mixed with original thinner. After a few minutes it looks like this?
Spraying the Dark Green.
First it looks like Yellow. I need so much layers to make it look like Dark Green, so the preshading is gone... 🙁
First it looks like Yellow. I need so much layers to make it look like Dark Green, so the preshading is gone... 🙁
I decided to remove the color on the upper site using spiritus.
It also went on the belly secured with Tese Sensitiv.
It also went on the belly secured with Tese Sensitiv.
The Tamiya tape I used to secure the tail and the belt around the fuselage ripped off the clor too.
What a nice Day...
What a nice Day...
I feared, that the spiritus also attacked Eddie.
But he is safe.
And angry!
Time to kill some zombies for the rest of the weekend...
But he is safe.
And angry!
Time to kill some zombies for the rest of the weekend...
Made Masks from paper and fixed them with UHU Patafix.
Painted the dark green from Vallejo
Also on the sides.
Didn't make pics from painting the dark earth.
Didn't make pics from painting the dark earth.
UHU Patafix changed the green colour. It made it lighter and shinier 🙁
Komentarzy
6 22 December 2019, 22:53
Christoph Kunz
Happy Christmas mates and welcome Munkyslut.
Today I got up pretty early to search the net for some blingbling for my Spitfire.
But after a while I found it would be more fun to build this kit ooB.
Just the Kit, the glue and me 🙂 and the stabilizers from Quickboost of course.
Happy Christmas mates and welcome Munkyslut.
Today I got up pretty early to search the net for some blingbling for my Spitfire.
But after a while I found it would be more fun to build this kit ooB.
Just the Kit, the glue and me 🙂 and the stabilizers from Quickboost of course.
25 December 2019, 18:47
Christoph Kunz
Some progress...
Fixed the marks UHU Patafix left. Pics of the current status later, it's to dark now.
Up the Irons
Christoph
Some progress...
Fixed the marks UHU Patafix left. Pics of the current status later, it's to dark now.
Up the Irons
Christoph
7 March 2021, 20:27
Album info
Using the Spitfire from Hobby Boss and the figure of Eddie from Revell to build the stageversion from the 2018 tour.
Up the Irons