Homemade film-free decals
Komentarzy
10 20 October 2020, 16:55
![](/profiles/img/42037-373-s.jpg)
What's the story with these decal sheets? How do you use them? What are the advantages/disadvantages?
20 October 2020, 17:17
![](/profiles/img/75586-861-s.jpg)
Sorry I don't speak English well
This paper is similar to HGW MODEL wet transfer decal
The advantage is that only the color without top coat remains on the model as with a normal decal
video:
Youtube Video
![](https://img.youtube.com/vi/OK_JpiL_MBQ/maxresdefault.jpg)
20 October 2020, 18:03
![](/profiles/img/35336-108-s.jpg)
Sorry if I don't understand this correctly, but why wouldn't you just paint directly onto the model with those masks?
20 October 2020, 18:12
![](/profiles/img/42037-373-s.jpg)
interesting, micromark had a similar product but I don't think they offer it anymore.
20 October 2020, 18:55
![](/profiles/img/75586-861-s.jpg)
To Jasper
This way i can avoid the risk of damaging the model, for example by scraping/peeling off the underlying color or by underspraying the mask. There is more at risk. I was mainly showing that with these mask, you can use ordinary color and not only laser printer. In my case Gunze hobby color.
21 October 2020, 09:17
![](/profiles/img/26948-347-s.jpg)
Ok, but I see you used not printer but just the airbrush, just painting it on that paper, so maybe it is possible to print on ink printers.
21 October 2020, 17:51
![](/profiles/img/68551-989-s.jpg)
I have just been testing some as I could not get the decals I wanted, I used a deskjet version, I obtained them from amazon. They work really well. Snitieecr A4 10 sheets and some crystal Clear to seal the image.
21 October 2020, 20:39
![](/profiles/img/75586-861-s.jpg)
To Darek
No, it won't work. Is the difference between the ink in the printer and the airbrush color. I tried it this morning and it's not dry even after ten hours.
22 October 2020, 14:45
![](/profiles/img/13846-389-s.jpg)
Very interesting these waterslide decals. Did you order them directly from sunnyscopa?
At the sunnyscopa side I saw that they offer a M sheet too, which is although for plastic and ither surfaces like the A sheet. Which one is better? In that video you've posted it is said A?
22 October 2020, 17:00
![](/profiles/img/42212-306-s.jpg)
Hi Frantisek. I have theses sheet too in the stash but never put them to use. Actually because there was a point in the instructions requiring the applied decal to be heated for a time in the oven. I suppose you did pass on that step as the model would be all melted. Did you do something special to get them perfect or just stepped over the oven part. Cheers
22 October 2020, 17:49
![](/profiles/img/75586-861-s.jpg)
Yes, I ordered directly from sunnyscopa. I don't know which is better, I have type A only.
22 October 2020, 17:54
![](/profiles/img/75586-861-s.jpg)
Hi Mathieu
I applied glue Mr. Mark Setter under the decal.
I let the Decal dry. Minimal 2 hours, but it's not a problem to let it dry until the next day.
I didn't use any heater.
If the surface is too rugged, Mr Mark Softer can be used after removing the cover foil. But very carefully, you need to try outside the model.
23 October 2020, 04:32