Ścianka
Wall
Skyhikerdodał nowy album.
135 zdjęć/zdjęcia
Focke Wulf Ta 152 H-1 (1970 tooling / Scratch)
1:72
I added the green bar on the tail stripe.
Projekt: Focke-Wulf Ta 152 H
All comments (207) » 87 27 January, 18:23
Mr DIt's been great the way you have documented the build, l think us modders.... like to see the nuts n bolts of things.
It's encouraged me to scratch up all the missing details to my current Be-6 build.
👍👍👍⚡
1 October, 14:06
Greg BakerSo great! It might not work for this build, but in the past, I've used homemade decals on white backing and laid them down on the undercoat. Then I seal them with a coat of Future (but any clear coat would probably do) and then CAREFULLY mask them and paint over them. If you use small enough bits of tape, it usually come off without tearing the decal and the blending is MUCH less noticeable than applying it on top of the paint. Something to try for next time maybe.
1 October, 18:32
September 30, 2024
September 27, 2024
September 26, 2024
September 24, 2024
September 23, 2024
September 20, 2024
Skyhikerchciałby nabyć ten przedmiot
Air Racing
Laird LC-DW-300 "Solution" The Laird speedwing Solution Dekno Models 1:72
AR. 720800 2012 Nowe formy 20 September, 18:32
September 19, 2024
SkyhikerThe P-70 was made by Douglas. Apparently Revell, wanting to use the unofficial name of Nighthawk, had to pay Lockheed for use of the name due to TM. But why they called it a Lockheed P-70 is beyond my comprehension. This plane clearly should be Douglas P-70.
1 19 September, 12:15
September 18, 2024
SkyhikerThis stencil is made out of cardboard. Ridiculously expensive for what it is.
18 September, 16:34
Kesa Tiho(from what i can see) 10~ euros is absurd for cardboard with cuts in it but i imagine cutting into cardboard to try and replicate the pattern on that is pretty difficult, and painting those sorts of patters by hand is borderline impossible in my opinion.
18 September, 16:40
SkyhikerYeah well, they actually want 14 euros for it. But they claim it is better than metal because it is more flexible. We will see if it lasts after it gets wet. I have a feeling it won't.
18 September, 17:31
Skyhikerposiada ten przedmiot
Plastic Sanding Needles, medium / grit 240
Albion Alloys
345 18 September, 16:39
Skyhikerposiada ten przedmiot
Plastic Sanding Needles, fine/ grit 320
Albion Alloys
346 18 September, 16:39
Skyhikerposiada ten przedmiot
Micro Brass Tube, Round, 0,5mm OD x 0.3 ID.
Albion Alloys
MBT1M 18 September, 16:29
Skyhikerposiada ten przedmiot
Micro Brass Tube / 0.7mm OD x 0.5mm ID x 305mm L
Albion Alloys
MBT07 18 September, 16:25
September 16, 2024
September 15, 2024
September 9, 2024
September 8, 2024
September 2, 2024
August 26, 2024
August 25, 2024
August 22, 2024
August 21, 2024
Skyhikerdodał nowy album.
14 zdjęć/zdjęcia
Tic Tac UAP (Scratch build)
1:72
The part I hate most. Watching paint dry when you really want to continue.
Projekt: Tic Tac UAP
Scratchbuilt
All comments (27) » 16 31 July, 21:12
SkyhikerWell I wanted to finish this up today before I go on vacation but the stars decided to mess with my airbrush. It was totally clogged from using 3rd generation acrylic in the same brush as laquer paint. The 3rd generation need a dedicated airbrush. It's totally a strange paint. When I finally finished cleaning everything I was having trouble with the Taimya X2. I haven't had so much difficulty painting since I just got a airbrush for the first time.
20 August, 19:23
SkyhikerAfter working with AK third generation paint for a year I now realize that Tamiya paints smell stronger. It must be because they are a hybrid acrylic. I am starting to prefer the 3rd generation more.
21 August, 22:50
August 19, 2024
August 14, 2024
August 13, 2024
SkyhikerThey work well but they are very fragile. The handle is too thin and slips out of your hand very easily. I bought two and both broke, the first one on the first day and the second when I dropped it two months later. I won't be buying them again because there are better options for a little more money.
Fine Engraving Blade 0,2 mm
Border Model
BD0043 1 13 August, 20:30
August 12, 2024
Skyhikerdodał nowy album.
16 zdjęć/zdjęcia
Foke Wulf 190 F-8 (1997 tooling)
1:72
I drilled out the cannons and added a styrene ring around the hole. Later I will replace the cannons with brass tubing.
Projekt: Focke-Wulf Fw 190 F-8
All comments (20) » 19 1 August, 17:22
SkyhikerI decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.
11 August, 17:42
Mr DHi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.
11 August, 17:48
August 11, 2024
SkyhikerI will be heading out to various museums in Germany to begin designing accurate riveting guides. There are plenty of aircraft I am interested in but I wanted to ask if anyone has a request for specific blueprints? My only criteria is that there must be a plane in Germany that I can take measurements from. Let me know if there is anything you want.
All comments (13) » 4 7 August, 20:12
Michael KohlAlouette II
Bell UH-1D
Fieseler Fi 156 Storch
Fokker E III
Messerschmitt Bf 108 Taifun
Mikoyan-Gurevich MiG-23MF
Mil Mi-4
Rockwell OV-10B Bronco
🙂
10 August, 21:24
SkyhikerThanks Michael, I am working on the blueprints of a Focke-Wulf 190 A-8 right now. Once I am done I will probably start on drawing out the Fokker E III and I will try to check what is required to do the Do 24, although that will take a lot more organization.
11 August, 10:42
August 10, 2024
August 8, 2024
August 7, 2024
August 3, 2024
August 2, 2024
August 1, 2024
July 31, 2024
July 28, 2024
Skyhikerchciałby nabyć ten przedmiot
Kamov Ka-226 "Серёга" Камов Ка-226 "Серега" lat: "Serega" ("Seryoga") 
Amodel 1:7272129 2005 Nowe kalkomanie
Amodel 1:7228 July, 01:33
July 27, 2024
July 26, 2024
SkyhikerWhat is the difference between rebox and new box in the product timeline? I've seen some older kits that have both several times without any real changes.
26 July, 01:47
Matthew AIf is says 'new box' it is because the main change is in the packaging*.
Normally when it just says 'rebox' on the timeline it is because it not known weather anything other than just packaging changed - decals, updated parts, etc.
When you click on it, it will say something like 'Released: 199x Changed ???' in the details
and if click edit it will say 'Origin: Rebox (Unknown what changed)'
*Changes can be as subtle as a barcode, so you wouldn't necessarily notice from the box top.
Or even the type of box:
De Havilland Mosquito Mk4 or Mk6 (FROG F187, 1:72)
De Havilland Mosquito Mk4 or Mk6 (FROG F187, 1:72)
26 July, 14:52
John HughesA rebox could also be the kit being released by another manufacturer, e.g. many Revell kits are old Matchbox or Monogram products.
26 July, 14:55
Matthew AAnother reason for just saying 'Rebox' in the timeline is because it was 'Cancelled | Never released'
English light bomber "Mosquito" (Zvezda 7234, 1:72)
Some say things like this shouldn't be included on ScaleMates, but it is important information as they may appear on catalogues leaving collectors hunting for something that never existed. ☺️
26 July, 15:49
July 25, 2024
July 24, 2024
July 21, 2024
July 18, 2024
July 17, 2024
July 15, 2024
July 14, 2024
Skyhikerchciałby nabyć ten przedmiot
Single riveting rows (black color) rivet size 0.10 mm, gap 0.4 mm
Quinta Studio 1:72
QRV-019 2023 Nowe formy 14 July, 07:30
Skyhikerchciałby nabyć ten przedmiot
Double riveting rows (black color) rivet size 0.10 mm, gap 0.4 mm
Quinta Studio 1:72
QRV-027 2023 Nowe formy 14 July, 07:30
July 11, 2024
July 10, 2024
July 7, 2024
July 6, 2024
July 4, 2024
July 2, 2024
June 29, 2024
June 23, 2024
June 16, 2024
wnolder.php?lang=pl
2024-06-16 10:15:17
2018-12-23 23:12:24
46074
/ajax/wnolder.php?lang=pl&sd=2024-06-16 10:15:17&md=2018-12-23 23:12:24&filter=&w=46074
todo