Su-57 "The President" (WIP)

1
September 5, 2021
2
September 5, 2021
Starting
3
September 5, 2021
A little squeeze, to eliminate lateral gaps in the long bottom part
4
September 8, 2021
These lines do not exist, at least not on Blue 511, so putty time is on!
5
September 8, 2021
Cockpit blue painted with MRP-195 “Sukhoi Cockpit Blue-Grey”
6
September 8, 2021
Color match between MRP-195 and Quinta’s set is perfect
7
September 9, 2021
Closing the panel and scribing the missing panels
8
September 11, 2021
Decision of colors........
9
September 11, 2021
I rather like the combination of MRP-133 and MRP-296; the more photos I see the less sure I am... should I, maybe, just choose the color I like best?...
10
September 12, 2021
Although all the surface is grainy, in some points it becomes ridiculous…
11
September 12, 2021
Although all the surface is grainy, in some points it becomes ridiculous…
12
September 12, 2021
Cockpit in place
13
September 13, 2021
Added some weight to the nose: better safe than sorry!
14
September 13, 2021
Glueing the intakes
15
September 14, 2021
Closing
16
September 15, 2021
Closing the rear part of the fuselage
17
September 18, 2021
Sanding the face of the engine holes: closest is sanded, the one in the back will still be sanded; if I don’t do this, the engine nozzles will not fit
18
September 18, 2021
Engine nozzles will also have to be sanded in the ring that connects them to the fuselage
19
September 18, 2021
Nozzles sanded; if I don’t do this, the engine nozzles will not fit the fuselage engine holes
20
September 18, 2021
Masking canopy and HUD parts
21
September 18, 2021
Dry fitting the main landing gear; very sturdy
22
September 18, 2021
Working on the bits
23
September 18, 2021
Ready for the windshield
24
September 18, 2021
Windshield glue in place with Tamiya Extra Thin cement
25
September 18, 2021
Windshield glued, moving on
26
September 18, 2021
Some nasty gaps - used Plastic Perfect Putty and cotton swab dipped in waper and I'll waste no more time
27
September 18, 2021
Despite all care, some nasty gaps and asymmetry persist - will have use Perfect Plastic Putty again
28
September 19, 2021
First color applied
29
September 19, 2021
First colors applied
30
September 20, 2021
Still not sure about the colors........
31
September 20, 2021
I think maybe MRP-136 is the one! Maybe... 🙂
32
September 22, 2021
Masking for the interior blue (MRP-195)
33
September 22, 2021
Interior blue (MRP-195) applied
34
September 23, 2021
Applied Gunze C308 to the top panels of the tails
35
September 23, 2021
Putting the New Ware masks to good use, painting the side panels with Gunze C308
36
September 23, 2021
New Ware masks proving they are worth their price, painting the first digital patterns on the tails with MRP-136
37
September 23, 2021
First digital patterns on the tails with MRP-136 over MRP-296
38
September 25, 2021
Vertical tails are done
39
September 26, 2021
Landing gear
40
September 26, 2021
Top of the fins corrected with Gunze C308
41
September 28, 2021
Over one hour of masking
42
September 28, 2021
Paint applied
43
September 28, 2021
Camouflage done, minor touch ups to make
44
September 28, 2021
Slight color change on these two panels, as per reference photos
45
October 4, 2021
Adding the metallic plates with Evergreen plastic sheet
46
October 4, 2021
Plates painted blue, will be aluminium
47
October 8, 2021
The exhausts turned out awful; will have to darken them substantially……
48
October 9, 2021
Too dark now!!! 🙁
49
October 9, 2021
Definitely too dark 🙁
50
October 9, 2021
Addding lighter tones with AK Xtreme Burnt Metal
51
October 9, 2021
I think it’s better now
52
October 9, 2021
Top side with corrections
53
October 9, 2021
Now for the tubes…
54
October 9, 2021
Some oils to use
55
October 9, 2021
Exhaust tubes with oils applied
56
October 9, 2021
Exhaust tubes with oils applied
57
October 12, 2021
Dirtying with Tamiya X-19 Smoke
58
October 12, 2021
Tamiya Smoke applied over the black oils
59
October 14, 2021
Varnished and decaled
60
October 14, 2021
Decals applied over X-22: very thin and prone to bend out of alignment but, fortunately, very strong
61
October 14, 2021
Once dry, decals almost disappear
62
October 19, 2021
Painting the lights base with aluminium
63
October 19, 2021
Painting canopy seal
64
October 19, 2021
Touch ups on the cockpit
65
October 20, 2021
Last minute putty
66
October 20, 2021
Wheels up (or down...)
67
October 21, 2021
Finished!!!

Komentarzy

36 5 September 2021, 18:49

Maciej Bellos
Following!

9 September 2021, 22:37

Ricardo Reis
Welcome Maciej.

9 September 2021, 23:20

Nathan Dempsey
Following 👀

12 September 2021, 20:26

Ricardo Reis
Welcome Nathan

12 September 2021, 21:23

Maciej Bellos
Ricardo, imagine this same grainy surface on the 72nd edition of this kit. I took a closeup of the wing and it looked, well, hideous!!!

15 September 2021, 18:56

Ricardo Reis
Yes... and the fit is also not... perfect... 🙂

15 September 2021, 19:30

Robin (WhiteGlint)
Coming along nicely. 👀

18 September 2021, 20:28

Ricardo Reis
Yes, the plane is very nice, although I got some nasty gaps on the fuselage joint on some point - not sure if it's the kit or if it was me...

18 September 2021, 22:21

Jos Jansen
Iam in Ricardo...promising start!

19 September 2021, 05:58

Robin (WhiteGlint)
I think it is the kit. I built the 1:72 scale version from Zvezda and faced pretty much the problems you did.

19 September 2021, 06:29

Ricardo Reis
Thanks mates; @WhiteGlint, thank you for you feedback - always comforting to know it probably wasn't my bad modeling that caused the bad alignment! 🙂

19 September 2021, 12:03

Maciej Bellos
It's the kit... As WhiteGlint, I am working on the 72nd kit, whose basic engineering was used in 48th scale kit and I see the same problems. My intakes look hideous so I will just finish it without much of a fuss.

19 September 2021, 17:49

Ricardo Reis
Yes, a lot of Perfect Plastic Putty to remedy this; the fuselage (front to wings comparison) is also a little crooked, but only I can see it! 🙂

19 September 2021, 19:22

Ricardo Reis
Progressing now with the painting, slowly

25 September 2021, 16:14

Robin (WhiteGlint)
Super clean paintjob!

28 September 2021, 10:41

Ricardo Reis
Thank you @WhiteGlint - the dirty part will come after, with some restrained weathering made with oils

28 September 2021, 14:00

Gidge
Nice! I've been inveterate in this kit for a while. How is it to work on?

30 September 2021, 16:45

Ricardo Reis
Thanks. It has some fitting problems between upper and lower halves; apart from that, it's ok, although not very accurate: a lot of missing panels and venting grid due to over-simplification; for example, the grids below the intakes are decals!

30 September 2021, 19:21

Ricardo Reis
Decalling complete, now moving to panel line pin washes...

15 October 2021, 18:55

Ricardo Reis
This on is complete; final photos of the model in this album -> Su-57 "The President" | Album by RReis (1:48)

21 October 2021, 22:47