Brabham F2

1
September 10, 2021
Jack Brabham drove many of his own creations and won multiple world championships in them. Among the Formula 1 and 2 championships was the 1966 Formula 2 powered by a Honda four cylinder engine.
2
September 10, 2021
Most who know me know I am an unabashed fan of EBBRO Formula kits. This one doesn’t disappoint either. Very few mould lines are on the kit but the body is where a couple did appear. These are before and after shots after getting some attention.
3
September 10, 2021
4
September 10, 2021
The engine will be mostly hidden so no wiring will be done to this one.
5
September 10, 2021
The transmission done in Alclad aircraft frame aluminium.
6
September 10, 2021
The engine casting is done in Alclad Hi Shine Aluminium.
7
September 10, 2021
The fuel tanks done in Alclad Stainless Steel
8
September 10, 2021
There are two body panels joined here. The join should be well hidden by the UMP primer.
9
September 10, 2021
Another shot of the same joined parts.
10
September 10, 2021
Exhaust pipes were done in chrome along with many other parts. Removed (mostly) with a bleach bought at Aldi.
11
September 10, 2021
Chrome parts skinned alive. The bleach was far from successful. It does remove Hasegowa chrome well but doesn’t work at all with Italari and not particularly well on EBBRO chrome.
12
September 10, 2021
Disc brakes done with Alclad Stainless Steel and calipers covered with Tamiya Clear Green.
13
September 10, 2021
Chassis coming together. I have used different shades of grey for some parts so they are highlighted rather than go with the listed colour on all parts.
14
September 10, 2021
I have to get those exhausts paired up better!
15
September 10, 2021
16
September 10, 2021
17
September 10, 2021
A tight fit for many parts on the rear suspension. So tight in fact many didn’t need cement at all.
18
September 10, 2021
19
September 16, 2021
Decals are few and far between
20
September 16, 2021
The rolling chassis completed
21
September 16, 2021
The potential to add detail is very present
22
September 16, 2021
The front suspension and steering
23
September 16, 2021
Radiator and supplied plumbing
24
September 16, 2021
25
September 16, 2021
Fuel filter has four mounting points for plumbing. I should have researched this better.
26
September 16, 2021
So much complexity!
27
September 16, 2021
28
September 16, 2021
Not a lot of driver space in the cockpit
29
September 16, 2021
More detail on the supplied radiator hoses
30
September 16, 2021
31
September 16, 2021
Next step is to clean up the plastic and add the clear coat. I will be sealing it all in with SMS 2k.
32
September 26, 2021
Ok, this after 2k application. A bit of orange peel that needs removal
33
September 26, 2021
After sanding with 6,000, 8,000 and finally 12,000 then cut back with a cutting compound.
34
September 26, 2021
After polish.
35
September 26, 2021
Waxed and ready to fit
36
September 26, 2021
All 3 pieces of bodywork.
37
September 26, 2021
The bodywork didn’t quite fit tight despite making sure the 2k didn’t get into the contact area.
38
September 26, 2021
Martin Oostrom told me how to camber the wheels.
39
September 26, 2021
Engine on display, no electrics on this one.
40
September 26, 2021
Still not sure about Martin’s wheel cambering
41
September 26, 2021
Ready to button up
42
September 26, 2021
Cockpit
43
September 26, 2021
Now, where’s that chequered flag?
44
September 26, 2021
Which way does the track go and what’s the lap record?
45
September 26, 2021

Komentarzy

18 10 September 2021, 02:13

Spanjaard
looking good Peter

10 September 2021, 08:11

Peter Hardy
Jon, I used to use Mr Muscle but the bleach came recommended. It is very good on Hasegowa though.
Thanks Spanjaard! Looking forward to painting the body.

10 September 2021, 08:14

Stéphane Jayet
Promising

10 September 2021, 13:16

Peter Hardy
Time will tell Stephane!

10 September 2021, 22:02

Rui S
I'm in 😎

12 September 2021, 13:17

Thomas Steinke
Good work! 😄

12 September 2021, 18:08

Peter Hardy
One more step and she's done!

16 September 2021, 09:21

Thomas Steinke
A Beauty Peter! 😄

16 September 2021, 09:54

Peter Hardy
Thanks Thomas! Trying to catch you up but failing miserably! Must work harder, must work harder, must work harder, must wor………………

16 September 2021, 22:31

Thomas Steinke
Thanks, but don't be too humble, it looks great!

17 September 2021, 01:09

Peter Hardy
Cheers Thomas!

18 September 2021, 09:48

Rui S
Looking great 👍

18 September 2021, 12:48

Stéphane Jayet
Promising turned into really great build. Congrats

18 September 2021, 20:45

Peter Hardy
Thanks Rui and Stephane! Wonderful kit and fun to build!

19 September 2021, 00:51

Peter Muldoon
This one looks like it would have been fun. Turned out great! I'll have to ask Martin how to camber wheels for future builds.

26 September 2021, 08:11

Peter Hardy
Thanks Pete, it certainly was fun and take my advice, NEVER take advice from Martin!

26 September 2021, 10:13

Richmond
Beautiful result Peter

26 September 2021, 10:31

Jay Dubya
Nice one Cracka

26 September 2021, 11:06

Rui S
Beautiful model. Very shiny & Nicely done 👍

26 September 2021, 11:06

Spanjaard
beautiful work Peter, you should be proud of it.

26 September 2021, 12:07

Thomas Steinke
Hmmmmm 🙂 what a great build!!!

26 September 2021, 12:24

Peter Hardy
Richmond, thanks mate, remember the name, EBBRO.
Jay Dub, all the girls used to say that! Cheers!
Rui, thanks mate, taken a while to learn the 2k but thinkI have the hang of it now.
Spanjaard, getting there mate, not where I want to be yet but closing in!
Thomas, glad you like it. Starting work on a Lamborghini next.

26 September 2021, 23:17

Rene Scheiblich
Came out just wonderful, mate. Definitely got the gloss figured out!
Practice does make perfect after all.
Is the camber fixed as well? 🙂

29 September 2021, 14:27

Peter Hardy
Rene, it might be easier to fix Martin, as one does with their cat!

29 September 2021, 22:49