He 115B (WIP)

1
October 29, 2021
2
October 30, 2021
Typical short run kit: no alignment aids
3
October 30, 2021
Typical short run kit: no numbers in the sprues
4
October 30, 2021
Start of cockpit assembly
5
October 30, 2021
Start of cockpit assembly
6
October 30, 2021
Fit is not bad, but there are no guides so we have to be extra careful
7
October 31, 2021
A lot of… adjustments are required
8
October 31, 2021
The kit was acquired second hand, missing a few resin parts, so I had to scratch a bit
9
October 31, 2021
Right side, ready for paint
10
October 31, 2021
Left side, ready for paint
11
October 31, 2021
Ready for paint
12
November 1, 2021
Opening the holes for the Eduard PE dials
13
November 1, 2021
Wholes open
14
November 1, 2021
Pre shading with black
15
November 1, 2021
RLM02 applied inside
16
November 2, 2021
Some work will have to be done, to preserve these shapes on the floaters
17
November 2, 2021
Thinning the inside before glueing the Eduard PE's dials
18
November 4, 2021
Some heavy putty + sanding required
19
November 4, 2021
Preparing the details that will be removed in the floaters because of all of the sanding required
20
November 4, 2021
Paiting the seats
21
November 11, 2021
Washed with Ammo PLW Green Brown (A.MIG-1612) and varnished over with MRP-127 Matt Varnish
22
November 12, 2021
Closing
23
November 13, 2021
To allow fit, I had to add a spacer made from sprue, to force the wing’s greater width
24
November 15, 2021
Fitting some of the clear parts, I must confess I was expecting much worse
25
December 6, 2021
A bit of detail on the intakes of the engines, with a soft tissue to simulate the fine mesh
26
December 6, 2021
Clear parts being glued
27
December 31, 2021
I didn't notice the interior colour is RLM72 and NOT RLM02 - I had to acquire the paint, from AK (AK RC276, in set nº 30) and repaint what I could; closed now | PS: not sure the interior here was RLM02 or 72 again.... well, not changing now, that's for sure!
28
December 31, 2021
I didn't notice the interior colour is RLM72 and NOT RLM02 - I had to acquire the paint, from AK (AK RC276, in set nº 30) and repaint what I could; closed now | PS: not sure the interior here was RLM02 or 72 again.... well, not changing now, that's for sure!
29
January 3, 2022
Wow, it has wingzzz!!!! 😄
30
January 3, 2022
Chin resin "thing" assembled with Ultra Glue
31
January 3, 2022
A bit of a gap on the wing roots
32
January 3, 2022
A bit of a gap on the wing roots
33
January 3, 2022
Large gobs of Tamiya White Putty to the rescue
34
January 3, 2022
Large gobs of Tamiya White Putty to the rescue
35
January 6, 2022
Engines ready
36
January 8, 2022
This is the way!
37
January 29, 2022
Just got the gorgeous 3D printed beaching trolley from Fire Scale Modeler!
38
February 1, 2022
Reinstating the sanded detail on the floaters
39
February 1, 2022
Details glued in place
40
February 3, 2022
On its "feet"
41
February 3, 2022
Floaters glued in place, some clean up to do...
42
February 5, 2022
Perfect plastic putty applied and cleaned with a wet cotton swab
43
February 5, 2022
Perfect plastic putty applied and cleaned with a wet cotton swab
44
February 5, 2022
Perfect plastic putty applied and cleaned with a wet cotton swab
45
February 5, 2022
Mr Finishing Surfacer 1500 Black diluted with Mr Color Leveling Thinner applied all over
46
February 6, 2022
Starting with the yellow and the red (MRP paints) over white primer
47
February 13, 2022
Some marbling with AKRC 273 (RLM65 - 1941)
48
February 13, 2022
Painting of the lower half complete
49
February 15, 2022
Attaching the clear parts in the front of the wings: not a pleasing task of pushing, sanding, polishing and swearing.
50
February 19, 2022
Taped and blu-tac‘ed, ready for paint
51
February 19, 2022
RLM73 applied with AKRC 277
52
February 19, 2022
RLM73 applied with AKRC 277
53
February 21, 2022
RLM72 applied with AKRC 276
54
February 22, 2022
Adding salt
55
February 22, 2022
Painted over the salt with diluted paint (base color + white)
56
February 22, 2022
Painted over the salt with diluted paint (base color + white)
57
February 22, 2022
Salt removed
58
February 22, 2022
Salt removed
59
February 24, 2022
Varnished with Tamiya X-22
60
February 26, 2022
First decals applied; very bright, will probably tone them down
61
March 1, 2022
Testing AK's "Worn Effects" and "Heavy Chipping" on the spare horizontal stabilizers, using Tamiya XF-2 Flat White thinned with X-20A, not lacquer
62
March 1, 2022
"Heavy Chipping" seems more controllable and I like the result
63
March 1, 2022
"Worn Effects" makes the paint come out in big slabs, very difficult to control - I do not like the result
64
March 1, 2022
And the winner is... "Heavy Chipping"
65
March 4, 2022
First splots of white (Tamiya XF-2) applied and chipped
66
March 5, 2022
Exhausts painted with Burnt Metal (AK 484)
67
March 5, 2022
Base coat of dark metal paint applied (Tamiya LP-19)… assuming it was made of metal
68
March 5, 2022
Beaching trolley painted Olive Drab and chipped
69
March 5, 2022
Progress so far, all polished and varnished with Tamiya X-22
70
March 5, 2022
Progress so far, all polished and varnished with Tamiya X-22
71
March 5, 2022
Progress so far, all polished and varnished with Tamiya X-22
72
March 6, 2022
Painted the main bay outline with Tamiya X-19 Smoke
73
March 6, 2022
Floaters water line painted
74
March 8, 2022
Using Air Weathering Set A.MIG 7414 (German Early Fighters & Bombers) from Ammo for pin washes
75
March 8, 2022
Using stronger Tamiya black enamel wash for the control surfaces
76
March 14, 2022
Using "Salt Streaks for Ships" from AK, an enamel wash reference AK 306
77
March 14, 2022
After dry, I stippled the lines with the product with a wet brush, then streaked down, again with a we brush, and finally cleaned above and below the line with a wet brush and with a cotton bud; finally, after dry, streaked and cleaned excess with a very stiff flat brush
78
March 14, 2022
Some progress in the woods
79
March 16, 2022
Trolley assembled and painted (wheels not glue yet)
80
March 27, 2022
Glueing the trolley in place, with Ammo Ultra Glue
81
March 27, 2022
Making all four wheels touch the floor at same time is no small task 🙁
82
March 28, 2022
Rear wheels... still wobbly, they were corrected later
83
March 29, 2022
Inching forward, now with all the wheels and the propellers glued
84
March 29, 2022
Inching forward, now with all the wheels and the propellers glued
85
April 2, 2022
That magic moment when you start removing the masks
86
April 2, 2022
Masks removed
87
April 3, 2022
Finished!!! 🙂 Final photos can be seen in the other album under this same project. Thank you for your kind words and support througout the months it took me to complete this demanding build!

Komentarzy

74 29 October 2021, 20:00

Ben M
Watching this, I like floatplanes

29 October 2021, 20:21

Ricardo Reis
Thank you @Ben, welcome

29 October 2021, 20:21

Guillaume Blanchet
Watching for sure!

29 October 2021, 21:19

Ricardo Reis
Welcome @Guillaume

29 October 2021, 21:40

Thomas Espe
Following, love floatplanes and flying boats

31 October 2021, 09:10

Ricardo Reis
Welcome @Thomas 👍

31 October 2021, 18:57

Skyhiker
Ok I'm in

31 October 2021, 23:23

Ricardo Reis
Welcome @Skywalker, it'll be slow, but sure! 🙂

1 November 2021, 00:14

Sebastian Meyner
Looking great already 👍 Following for sure!

11 November 2021, 19:48

Ricardo Reis
Welcome @Sebastian!

11 November 2021, 21:15

Guy Rump
Following with interest 👍

13 November 2021, 17:50

Ricardo Reis
Welcome @Guy, closing the fuselage and wings now; being short run, I having the usual dificulties of this kind of kits

14 November 2021, 12:18

Markus Yliaho
Looking great! I have the same kit so im specially interrested in the final result

14 November 2021, 15:39

Ricardo Reis
Welcome @Markus; let's see how I can manage the symmetry of the plane - the part are not perfectly molded and the joints are minimal

14 November 2021, 16:27

Markus Yliaho
Yes so I´ve heard. Especially trouble with connecting the wings to the fusalage so they wont risk breaking off. There is a film on youtube where they fix the problem Ill have a look if i can find it.

15 November 2021, 22:53

Ricardo Reis
Yes, please do let me know; I will try to do all the work on the wings before attaching them; I also worry about the symmetry... I'll try to make a jig to ensure this...

15 November 2021, 23:58

David Taylor
Always fancied this one Ricardo.What does it fit and build like.Is it a typical Special Hobby.

31 December 2021, 06:20

Ricardo Reis
@David, this is a typical Special Hobby, so some filling and sanding is required; not too bad though, and the clear part fit surprisingly well; the proof of the pudding will be, next, the joining of the wings to the fuselage, let's see how that goes...

31 December 2021, 13:46

David Taylor
Thanks Ricardo HNY.

31 December 2021, 19:38

Nathan Dempsey
This one is on my wishlist. Following 👀

31 December 2021, 19:55

Alec K
Following

31 December 2021, 22:40

Ricardo Reis
Welcome mates!

1 January 2022, 20:03

Christian Lehmann
👍

1 January 2022, 20:19

Ben M
what a lot of masking!

3 January 2022, 18:56

Ricardo Reis
Yes, @Ben, a lot indeed - I think this is, by far, the most "windowed" plane I have ever built! 😄

3 January 2022, 19:15

Melgg Lütschg
Following with great interest! I paused mine a while ago after fitting the wings.

18 January 2022, 15:19

Ricardo Reis
Welcome @Melgg - I'm currently waiting for the floats, which are being used to make a beaching trolley. The wings did take a LOT of putty and sanding. 😓

18 January 2022, 19:19

Rui S
Está interessante e com bom aspecto 👍

15 February 2022, 21:14

Ricardo Reis
Obrigado @Rui, sim é um bicho imponente! 🙂

16 February 2022, 00:07

Alec K
It's looking great Ricardo 👍

16 February 2022, 17:54

David Taylor
Yes,this is the way.

16 February 2022, 17:58

Ricardo Reis
Thank you @Alec and @David! 😄

16 February 2022, 23:26

Skyhiker
BIG!

18 February 2022, 14:52

Ricardo Reis
Yes @Skywalker, bigger than I thought when I started it; lots bangs in the desktop lamp when I'm painting it!!! 😄

18 February 2022, 16:42

Alec K
Nice progress Ricardo. I like your salt effect, and appreciate the chipped paint testing. Have you tried to chip a lacguer-thinned paint?

2 March 2022, 02:14

Ricardo Reis
Thank you @Alec; I have previously tried to chip MRP paints and it was almost impossible; I have subsequently read about this and apparently lacquer based paints (or Tamiya thinned with Lacquer Thinner) are very, very hard to chip

2 March 2022, 09:49

Alec K
Good to know, thanks Ricardo.

2 March 2022, 13:18

Villiers de Vos
You are putting a lot of effort in this model and it is showing off your hard work.

6 March 2022, 03:31

Lochsa River
Ricardo builds a floatplane....siting in...great work so far...

6 March 2022, 03:37

Thomas Bischoff
great work 👍 the paintjob is gorgeous

6 March 2022, 10:06

Ricardo Reis
Thank you very much @mates, your kind comments give me additional motivation; almost there, moving now to closing the beaching trolley and to the washes; then oils and, hopefully, build should be finished in the next couple of weeks

6 March 2022, 20:43

Ricardo Reis
Thank you @Jorge, much appreciated

15 March 2022, 15:31

David Taylor
Really coming together now.

27 March 2022, 21:50

Ricardo Reis
Yes, final stretch! 🙂

27 March 2022, 22:22

Guillaume Blanchet
It getting better and better 🙂

28 March 2022, 01:57

Villiers de Vos
The perspective created by photograph number 81 shows off the sheer size and detail that you have put into this project. Very nice.

28 March 2022, 04:11

Gerald
👍

28 March 2022, 05:52

Ricardo Reis
Thank you mates - the final steps are quite difficult and reveal some missalignement of the floats, which were not noticeable until now; furthermore the wheel placement is not that great, so I spent a long time glueing and unglueing everything with Ultra Glue; I do not know how I would cope if I was using CA glue....

28 March 2022, 10:27

Robin (WhiteGlint)
Impressive build, Ricardo 👍

28 March 2022, 10:41

Alec K
Excellent indeed. I appreciate all the technique tips 👍

28 March 2022, 13:15

Ricardo Reis
Thank you mates

28 March 2022, 14:41

John Wilkes
Your paint work and shading is incredible.

29 March 2022, 01:09

Ricardo Reis
Many thanks @John

29 March 2022, 09:28

Guy Rump
Looking great Ricardo. 👍

29 March 2022, 10:42

Ricardo Reis
Thank you @Guy, almost finished 🙂

29 March 2022, 18:20

Ricardo Reis
Thank you @Roland

29 March 2022, 22:19

Jim J
Looking good Ricardo!

29 March 2022, 22:39

Daniel Klink
Excellent work Ricardo 👍

29 March 2022, 22:52

Ricardo Reis
Thanks mates, for your encoragement, I hope I can finish it in the next few days

29 March 2022, 22:53

Jorge Ferreira
(img 84) talking about inching it looks that a lack of inches in the workbench is becoming quite noticeable......cheers Ric 😁

2 April 2022, 09:22

Ricardo Reis
Indeed @Jorge! 😄

2 April 2022, 20:19

David Taylor
Imitating Jaws.Your gonna need a bigger table.

2 April 2022, 20:23

Skyhiker
Looking great

2 April 2022, 20:23

Ctirad B
Well done, amazing!

2 April 2022, 20:49

Ricardo Reis
Thank you mates; yes, @David, it came out a very large beast! 🙂

2 April 2022, 21:35

Ricardo Reis
Hi all! This build is now closed! Many thanks for all your support and comments. Final photos here: He 115B | Album by RReis (1:48)

3 April 2022, 17:49

Spanjaard
Wow! suberb job Ricardo, hat off!

3 April 2022, 23:07

Ricardo Reis
Thank you Spanjaard 🙂

4 April 2022, 00:14

David Taylor
Well deserved.

4 April 2022, 14:02

Guy Rump
Very impressive build, congrats! 👍

4 April 2022, 14:12

Ricardo Reis
Thank you mates, much appreciated!

4 April 2022, 15:31

John Wilkes
This is a great photo. Any model builder will admire how perfect this looks. Your attention to detail and finishing techniques are skill I can only aspire to. Thank you for taking the time to share so much of your work.

16 April 2022, 02:53

Ricardo Reis
Thank you @John and @Jorge, you are very kind, I'm glad you liked it! 👍

16 April 2022, 10:48