P-61B Black Widow
1
March 19, 2024Nice box art2
March 19, 2024And a lot of plastic3
March 19, 20244
March 19, 20245
March 19, 20246
March 19, 20247
March 19, 2024The expectation was a quick and clean build8
March 19, 2024Starting the cockpit, the simplifications become apparent, looking at the entry hatch. That was covered later on with spare PE9
March 19, 2024Although the provided instrument board looks ok to me10
March 19, 2024The rear requires some more improvisation- added the lamp11
March 19, 2024Didn’t go for aftermarket engines - they are barely visible when done. The radome is full of lead pellets to balance the model12
March 19, 2024The kit offers the opportunity to open the weapon bay doors for the cannons. Unfortunately this is so far off the reality that I decided to close the bay (there are excellent photos of the real deal on the web)13
March 19, 2024My pics from Dayton show how important in the visual appearance the wing leading edge intakes are. Unfortunately they are blinded in the kit14
March 19, 2024So I had to improvise some interior structure in the wings15
March 19, 2024I used Ede’s masks, but they don’t fit, had to amend them with masking tape16
March 19, 2024First fitting - the alignment is not trivial, and the pokayoke not fitting tightly.17
March 19, 2024Another surprise - later versions of the Widow had the opportunity to close the landing gear doors with wheels down - this took a slight modification of one of the flaps vs the earlier versions - nicely visible on this pic18
March 19, 2024Unfortunately the kit doesn’t provide for that adjustment, so more plastic surgery is required19
March 19, 2024The gloss is merciless - more surface optimization20
March 19, 2024closing the canopy21
March 19, 2024The shine is there, but is it enough? More polishing and respraying. The challenge is that for a smooth, uniform gloss coat, you can’t interrupt the coating randomly, but the kit is too big for a full coat, so the interfaces for spraying sections need to be prepared and masked22
March 19, 2024Fitting all together and first weathering. The turret in the kit has thick walls and looks nothing like the originals. I thinned out the upper lip where the gun fairing is sitting against the turret. Looks much better, but requires extremely careful machining with the ballpoint milling cutter23
March 19, 2024The decals are ok, except the stencils. Didn’t find a way to settle them clear. The chipping is actually sponged Alclads. Not perfect, but much less hassle then actual chipping fluid on the experimental (for me) weathered gloss24
March 19, 2024Studying the available historical documentation, looks like the Widows were not all that shiny, after a while. To create this patchy result I used the paneliner fluid from AK. The results were looking ok, but the stuff didn’t want to cure. A support request to AK provided no answer :-/
We’ll see if it cures at last…25
March 19, 2024Taking shape, just some details like the antennas26
March 19, 2024I left just the only the crew hatches open. It preserves the nice silhouette of the airplane looking from other angles.27
March 19, 2024This is quite a big model, but also quite a nice looking one28
March 19, 202429
March 19, 2024
Comments
31 19 March, 22:56
Project info
29 images