He 115 in Sweden, T-2
![Album image #1 Album image #1](/albums/img/0/1/4/554014-33840-91-720.jpg)
The frame in place, as it will be covered by the pilots seat, the result is ok for me.
![Album image #2 Album image #2](/albums/img/0/1/5/554015-33840-37-720.jpg)
Gaps everywhere! But easy to fill.
![Album image #3 Album image #3](/albums/img/0/1/6/554016-33840-83-720.jpg)
Floor and sidewalls are 3mm too short. Some sheets of plastic helped to fill the gaps.
![Album image #4 Album image #4](/albums/img/0/1/7/554017-33840-37-720.jpg)
RLM02 painted. The inner side of the wing is a good test flat for the airbrush 🙂
![Album image #5 Album image #5](/albums/img/8/7/1/559871-33840-67-720.jpg)
Minor washing
![Album image #6 Album image #6](/albums/img/9/8/5/559985-33840-61-720.jpg)
The mesh of a teabag is good enough for the air inlet screen. Attached with kristal klear
![Album image #7 Album image #7](/albums/img/1/1/6/1241116-33840-78-720.jpg)
Some extra work on the elevators. Rudder separated. I used a band saw with a 0.5mm blade to make a thin cut.
![Album image #8 Album image #8](/albums/img/6/0/5/716605-33840-95-720.jpg)
Soo, after a long "break", I picked up this project again. Wings installed, some putty is needed...
![Album image #9 Album image #9](/albums/img/2/4/8/1401248-33840-25-720.jpg)
Used the book "Aufklärer, Bomber, Seenotretter" as a reference for the floats. The etched kit parts stayed in the box, I used 0.5x0.5 square plastic strips as a replacement.
![Album image #10 Album image #10](/albums/img/2/4/7/1401247-33840-21-720.jpg)
On both floats, I added a mooring ring as per picture in the reference book.
![Album image #11 Album image #11](/albums/img/5/9/5/1403595-33840-77-720.jpg)
Reference pictures. For me, it seems like a protective cover in front of the oil cooler mesh,
![Album image #12 Album image #12](/albums/img/2/4/6/1401246-33840-31-720.jpg)
The kit offers a fully opened oil cooler. In the www, one can find two types of oil cooler. I'll go for the nearly closed one, as i only found pics with this type on Swedish T2. (I found Pictures of both types for German Versions)
![Album image #13 Album image #13](/albums/img/1/9/4/1630194-33840-69-720.jpg)
Never found on any drawings, these non-retractable steps were added below the oil cooler on the forward strut.
Comments
10 8 December 2018, 18:24
![](/profiles/img/33449-254-s.jpg)
Cool.... habe das Teil auch bei mir Zuhause.. mal schauen, wann ich sie auf den Basteltisch wandert. Schaut auf jedenfall schon mal gut aus 🙂
23 April 2020, 19:37
![](/profiles/img/57594-145-s.jpg)
Nice progress on what looks like a surprisingly difficult kit - keep it up!
23 April 2020, 20:06
![](/profiles/img/33840-962-s.jpg)
Well, I had a looong break but your built inspired me and gave me new motivation to go on 🙂 Also, I got the beaching trolley this week! So work goes on with the engines.
2 March 2022, 19:26