Eduard Fokker E.iii - build.

1
March 14, 2019
The basic cockpit. Grey and white primer.
2
March 14, 2019
This stitching is nice but probably will need removing. Very tricky to paint in.
3
March 14, 2019
Basic cockpit components.
4
March 14, 2019
Adding some basic colours and varnishing.
5
March 14, 2019
Some basic weathering. Bit heavy handed. The varnish hadnt properly set on the metal finish. Oh well, ill tidy it up later.
6
March 14, 2019
Making a start on some PE parts. Very nice but sooo small.
7
March 14, 2019
Bit in the dark here with rudder control mechanism. It should fit behind the foot rest but it doesent really fit? Instructions not much help with this.
8
March 18, 2019
Adding in more of the metal internal framework. I have no idea what that big brass knob is for? Counterweight for the prop?
9
March 18, 2019
Quite a nice four part seat belt.
10
March 18, 2019
The throttle control is also quite nice, but so small and pretty much hidden once the lid goes on.
11
March 18, 2019
A fair line up on the top of the fuselage seam.
12
March 18, 2019
Really not so good underneath. Thats going to take a bit of work. Fortunately the PE stitching will cover most of the seam.
13
March 21, 2019
Some fairly light sanding has taken out the center line fairly well. Shame about the gap around the fuel tank cover.
14
March 21, 2019
A bit of hard sanding has taken out most of the joint. Some clamps would of really helped solve this. On the wishlist now.
15
March 21, 2019
Very little internal detail can be seen once the cockpit is joined up.
16
March 21, 2019
What you can see though is fairly nice. The fit is extremely tight. Not sure about that map ...
17
March 21, 2019
And on with the PE stitching. Im not so sure about that. It seems to all stick out a bit too much. Maybe it will sit in better after painting.
18
March 21, 2019
The stitching certainly does sort out the seam joint problem.
19
March 24, 2019
First base coat of canvas and grey. Diluted 50/50 thinners.
20
March 24, 2019
Three coats for the canvas finish. White 80%. Yellow 19%, Red 1%.
21
March 24, 2019
Gloss varnished for decals and initial weathering.
22
April 4, 2019
The decals went on very nicely indeed. The fuselage wraparound is in four parts so tricky to line up. Its a little bit out but you have to look very close.
23
April 4, 2019
The front landing gear is a bit odd. You have to stick on the thicker sections separately. These just dont fit very well
24
April 4, 2019
So on with some Plasto using a scalpel. Sanded up pretty well.
25
April 4, 2019
RAF Green 68 enamel wash highly diluted to simulate mould. Just dribbled on and then the centres removed.
26
April 4, 2019
A brown wash of 'Dark Earth' using a wide brush.
27
April 8, 2019
I was in two minds as to adding the wavy effect on the nacelle. Its quite subtle and hard to do well. Varies a lot on the viewing angle. After a little experimenting was fairly happy with this.
28
April 8, 2019
The PE part for the piston rods really adds some nice detail. There is also one on the back which is difficult to see. Broke a few in the process but patched it up ok.
29
April 8, 2019
The sanding on the legs turned out ok in the end. Thats the way to go. Trying a little experiment for the rigging with stretched sprue
30
April 8, 2019
Thats the main PE parts in on the undercarriage. Lost a part along the way so had to adapt a bit of PE sprue.
31
April 8, 2019
Adding in the lower wheel section. Looks pretty flimsy but its actually fairly strong once its all assembled.
32
April 8, 2019
All in all im fairly happy with that rigging. The streched sprue is a bit over scale but the idea is sound, if fiddly. An alternative to turnbuckles.
33
April 22, 2019
Wings stuck on. Really worth trying to get the wings flush with the fuselage. The two mounting holes are really not sufficient to hold the weight of the wing. Fell off several times later on.
34
April 22, 2019
A little experiment with hand made stretchers. The PE ones are ok but rather flat.
35
April 22, 2019
Painted up - I think thats going to work out ok. Its a bit more interesting than just EZ line on its own.
36
April 22, 2019
Matt varnish to seal the fuselage up.
37
April 22, 2019
Adding in more PE. Love the gun feed and bullets. The little wing compass is nice too. Starting the upper rigging.
38
April 22, 2019
Better view of the PE instruments.

Comments

14 March 2019, 17:57

Cuajete
Looking good so far, Mike. Following!

14 March 2019, 18:27

Mike Daniels
Hi Cuajete. Not done any Eduard kits for a while. Mainly Airfix of late. Mssing those alignment holes a bit but it all adds to the fun. Welcome. Odd but no one seems to have built this kit on SM before so im a bit in dark.

14 March 2019, 18:38

Ricardo Reis
I built the 1/72 from Airfix. Very small. Very interested on this one. Following.

14 March 2019, 19:23

Mike Daniels
Hi Ricardo. Yes I saw that and you made a brilliant job of it. You should do the Airfix BE2c. Its great little kit as well.Did it a few months back. Please dont expect too much from my build. Just working on the interior which is pretty cramped but its coming on. As ever you can hardly see any of it after assembly so I wont fret too much.

scalemates.com/profi..bums&album=45417

15 March 2019, 00:28

Mike Daniels
Pretty much done with the cockpit interior. Very cramped indeed. Quite like the PE seat harness.

18 March 2019, 23:25

Björn Svedberg
Nice start Mike! 👍 I'v got this kit on my wishlist, so I'm very interested to see the progress.

19 March 2019, 07:59

Mike Daniels
Hi Bjorn. So far, so good.

19 March 2019, 09:50

Nikolaos Kouzinis
Mike you begin a new embroidery. Bravo. Nice job

8 April 2019, 19:10

Mike Daniels
Thats about right Nikolaos. Its very fiddly getting the angles right. All part of the fun!

8 April 2019, 20:50

Mike Daniels
Hi Bob. Its a nice little kit. Quite a bit of PE which adds some nice touches.

8 April 2019, 22:10

Gordon Sørensen
Great looking Fokker, Mike! The metal effect at the front of the fuselage turned out very nice!

9 April 2019, 03:45

Mike Daniels
Thanks Gorden. Yes that metal effect is a little elusive. I think its a tempering effect in the metal casting on the actual aircraft. Its really varies with the lighting. Some have it others do not.

9 April 2019, 12:32

Album info

Not built any Eduard Profipacks for a while so looking forward to diving into this kit. Two very nice PE frets with the kit. Not sure how that PE stitching will work out. Thats going to be very tricky to paint. Also going to have a go at doing the swirly metal pattern on the cowling.

Eduard Fokker E.ii

47 images

1:48

Completed

All albums

View all albums »