Mariupol 1941
Comments
![](/profiles/img/18819-984-s.jpg)
I've some Miniart dios in stash, so I decided to do something diferent for me.
![](/profiles/img/32137-155-s.jpg)
I am booking my seat in the front row and will be following your progress.
![](/profiles/img/18819-984-s.jpg)
Thank you for your vote of confidence and encouragement mates.
I Apreciate it and i hope I will not disappoint you.
![](/profiles/img/46909-363-s.jpg)
Me too. I have two of these MiniArt building kits in the stash for two different dios. I'm looking forward to your progress.
![](/profiles/img/user-s.jpg)
Hi Rui, if you were to press this wall face down into something like Plasticine, and then pour the plaster onto the Plasticine, that might give you a crisper copy. Good luck with your experiments - I'm watching with interest (as these kits are not cheap....) 🙂
![](/profiles/img/18819-984-s.jpg)
Thank you for your vote of confidence and encouragement. I'm very pleased to have you on board mates. Now I'm feeling the pressure growing 🙂
@ Bruce, Thank you for your tip. Yes, It seems quite easier to do it Plasticine. I don't have any at the moment but...🤔
I also decided to duplicate the plastic windows in wood. So I've always other alternate molds up to scale.
I will try to make some scaled bricks in modeling paste, and other stuff to improve the overall detail.
I'm hoping to enjoy the work on this little scene.
Let's see how it's going to workout 😎
![](/profiles/img/41848-878-s.jpg)
Hi guys, pouring plaster in plasticine will soften the plasticine considerably (tried it), leaving you with a very difficult to clean plaster positive. I talked already of the Silicone & Cornstarch technique in another post. Here's a link to a YT clip: Youtube Video (as ever, the music sucks!) to show how easy this solution can be.
Hope to be of service... 😉
![](https://img.youtube.com/vi/50AkrE1s9Iw/maxresdefault.jpg)
![](/profiles/img/18819-984-s.jpg)
Thank you for your heads up and video, René.
It sure makes things easier to understand.
![](/profiles/img/18819-984-s.jpg)
@ gorbygould, Thank you Mate. Apreciated.
I'm Hopping to do something about it, but I don't know how special it wil be 😄 😄 😄
![](/profiles/img/14298-181-s.png)
The masters machinations. !
Make room for me on your brick fence there Rui. ! 🙂 👍
![](/profiles/img/18819-984-s.jpg)
You know I'm always proud to get a master on board. So you know you are always most welcome, Kezza. The pressure is on, hehehe
![](/profiles/img/18819-984-s.jpg)
Here is the reason why i will never be able to make a weekend model, at least with these old kits 😉
![](/profiles/img/20442-422-s.jpg)
Good grief, that little bike model has more parts than some aircraft kits I've done.
It's looking good so far and I'm interested to see how this develops.
![](/profiles/img/18819-984-s.jpg)
Thank you for your kind words mates, apreciated.
@Gorby, this is an old kit and could be more detailed. I hope you will like what I'm planing 😉
@Bruce, you're welcome. I hope it can help in someway, because you have more experience than me in Miniart dio kits 😉
![](/profiles/img/user-s.jpg)
I have a few motorcycles and bicycles in my stash, that I have put off attempting, as they have PE and tiny parts. Your added extras are encouraging me to make a start (when I am next in UK, and can get near my stash!)
![](/profiles/img/18819-984-s.jpg)
This one, unfortunatly dosen't have PE spokes on the weels 🙁
Looking forward to see your next builds.
![](/profiles/img/user-s.jpg)
Me too, Rui! I have been away for eight weeks, and don't yet know when I will be home again. I'm suffering withdrawal symptoms....
![](/profiles/img/18819-984-s.jpg)
Thank you for stoping by Villiers de Vos, I apreciate your comment 👍
I've finished the build and starting the paint work on the bike. More photos to follow 😉
![](/profiles/img/18819-984-s.jpg)
Well come abord and thank you for your comment Jean-Michel Tilquin.
"Your order is my command" 😉 🤔 😄
![](/profiles/img/14298-181-s.png)
Simply outstanding Rui. 👍 👍 👍
I am wondering about the crease in the drivers and pillions saddles, if that was hollow or left as you have it there. ?
![](/profiles/img/18819-984-s.jpg)
Hi, Kezza. Nice of you to stop by and leave your kind and wise words. Always very much apreciated.
If I get you right, you are speaking about the holes in the seats?
That completely scaped my attention. I have to study that issue... Thx again
![](/profiles/img/102691-453-s.png)
It will be getting a nice dio, i think!
Good detailed bike- good job on an old kit👍
![](/profiles/img/14298-181-s.png)
Rui. I just did a Google search for BMW seats for WWII army type M/Cycles. And it looks like you have it right. The seat has no slots or open cavities. 😉
![](/profiles/img/18819-984-s.jpg)
@Simon, thx a lot for commenting with encouraging words. I appreciate it.
@ Kezza It looks YOU are right Mate. I've looked at my research material and it seems they are mostly flat. I've seen one or two that have a slight depression on the front seat, but nothing so deep like in the kit.
Now I will have to further detail the seats 😄
![](/profiles/img/18819-984-s.jpg)
Kezza, I've Uploaded two photos 😎 second bike on the Left in the first photo.
In the second the front seat, apear to have 3 recess 😎
![](/profiles/img/14298-181-s.png)
Good spotting Rui. I wasn't being a smart ass. I genuinely wondered if they had the hole there for letting water drain away rather than pool, or cause a wet bum if you were not paying attention before you threw your leg over in a bit of a hurry to get away. (Just a thought mate. 😉)
![](/profiles/img/18819-984-s.jpg)
Of course you weren't Mate, you never where a smart ass, I'm sure you don't intend to start now 😄 More so, because what you say makes total sense. We motorcyclistes know how bad it is when water arrives to your Balls 😄 but normaly this guys use rubber suites on the winter.
I thank your insight and headsup. I've decided to change only the back seat and i've done it already 😉
![](/profiles/img/14298-181-s.png)
LOL. 🙂 I was only trying to be logical Rui. 😉
I am really looking forward to the progress images, as the final result will look so real, it will have us all opening our doors to let the engine fumes out. !!!! 👍 hehehehehe
![](/profiles/img/18819-984-s.jpg)
😄 Me too Mate 😄
Thanks for your encouraging words. I hope I don't disappoint your expectations.
![](/profiles/img/32137-155-s.jpg)
Very nice Rui, especially all the small details that you have added.
![](/profiles/img/18819-984-s.jpg)
Thank you for your suporting words Villiers de Vos. Apreciated.
I didn't go the extra mile, but there is always space to further detailling 😉
![](/profiles/img/user-s.jpg)
Liking the realism all the extra wiring, etc brings 👍 Is that an ignition key too ?!!
![](/profiles/img/76200-379-s.jpg)
That motorbike combo looks great, Rui; i hope you don't mind but i am going to copy your ideas as i have one of those combos waiting to be built and detailed.
![](/profiles/img/18819-984-s.jpg)
Thank you mates, for stopping by and comment this album. A good motivation.
@ Villiers, Glad you are following, and like it, so far 😉
@ Bruce, when you pick an old kit you know you will have extra work to do, but I'm not going the extra mile because this is tiny (for me ofcourse). That piece it is not the key. I think, it is for tighten / loosen / lock ? the steering shaft? 🤔
@ Jim, Welcome abord, Be my guest. I'm flatered, you are more than welcome 😄
![](/profiles/img/65866-287-s.jpg)
I'm not much of a fan of motorcycles in general, but your detailing and attention to detail with this build is fantastic 👍
![](/profiles/img/14298-181-s.png)
What ever the season you choose Rui. I am sure you will do it justice my friend. 👍 👍 👍 🙂
![](/profiles/img/102691-453-s.png)
a good job with the bike!
I also think that it still needs some dust and also on the floor of the sidecar
![](/profiles/img/18819-984-s.jpg)
Thank you for your comments mates.
@James, In the past I've done a Tamiya ketenkraft, 9 SS Panzerdivision | Album by mig (1:35)
and I always look at it and think, "why didn't you made the cables??? 🙁" So this time I was more comitted.
@ Kezza, well this time I'm going for a dry season 😉 apreciate your encourgement
![](/profiles/img/18819-984-s.jpg)
@ Simon, thank you for stopping by and comment. I'm going to try a soft urban dust weathering
@ Tini, I'm really glad you also like this litle thing.thanks a lot
@Olivier, Thanks a lot for your headsup. Apreciated mate.
I was so engrossed in building the bike that I didn't even go to see its production story. I already had a Dio in mind and now I have to change all the plans. I saw so many images of motorcycles invading Poland in 1939, that I was going for that. As you can see, I'm already thinking about the alternative, same context, same unit, but later in the war, 21/11/1941 – 27/11/1941.
![](/profiles/img/18819-984-s.jpg)
Thanks Olivier I'm glad you concor 😉.
I'm going to extend the time frame a little from 04/10/1941 – 27/11/1941, so there are no more inconsistencies 😄
![](/profiles/img/18819-984-s.jpg)
Thank you very much Bobby, I realy like it very much too and I'm not trying to be cocky. What I mean, is that I'm very happy with the result so far 🙂
![](/profiles/img/14298-181-s.png)
When your work is constantly of such high quality Rui. You can afford to be cocky mate. 👍 👍 👍 😉
![](/profiles/img/18819-984-s.jpg)
Hi Kezza, I know to well my limitations, so I prefer to be humble, (and believe me that's not false modesty) even more so, when I see the top modeling level here in scalemates. 🙂
![](/profiles/img/18819-984-s.jpg)
Well Daniel, Thank you so much for your kind comment Mate. It means a lot to me, comming from a top modeler like you.
![](/profiles/img/42481-607-s.jpg)
Hi Rui, it's looks like next exellent work 🙂. I will wait for final result.
![](/profiles/img/18819-984-s.jpg)
Thank you, for your vote of cofidence, Artur. Apreciated.
After aborting the 1939 Poland dio project, I've to redirect the all thing. But I've a plan B in mind.
![](/profiles/img/18819-984-s.jpg)
Thank you Mathias and Villiers de Vos, I'm very glad you like this one. A long way too go, but I'm very proud it took your attention.
![](/profiles/img/64742-583-s.jpg)
I love the pose of the bike, I wouldn't change anything. The road and building are super objects by their simplicity
![](/profiles/img/18819-984-s.jpg)
Thank you Jack. Nice of you to stop by and coment this one, Apreciated.
I see what you mean but I want to make an efort to do this dio more real, like I always try, and so y see that I still have lot's of work to do. 😉
P.S. Owh, and the Rommel unfinished figure, is just a touch for scale purpose.
![](/profiles/img/18819-984-s.jpg)
Some update photos, of the third kit for the dio.
My first Alan/Dragon Kit (definitely not for beginners).
Scratch on Zis truck, started 🙂
![](/profiles/img/20442-422-s.jpg)
That does look like a very challenging kit. Fortunately your skills can easily master it.
![](/profiles/img/18819-984-s.jpg)
Thank you for your kind words Mate.
Well, the kit is bad enough yep, but I'm challenging my scratch build with it, so I'm hoping to make something interesting out of it with spares and trash that I've accumulated in the man cave 😉
![](/profiles/img/18819-984-s.jpg)
This is the state that the transformation from Zis 5 (Zavod imeni Stalina 5) to PMZ-1 (Zis-11) special chassis developed for the fire departmant, is currently in.
It's a Autopump on a Amo-4 (Awtomobilnoje Moskowskoje Obschtschestvo-4) chassis, from Miusskaya fire engines plant almost in the center of Moscow.
PMZ-1 also (ПМЗ-1) or (ЗИС-11) is the first model of this plant, realeased in 1934. This fire truck had a engine power of 55kW, a load capacity of 3 tons, was designed for 12 people, equiped with a centrifugal pump that suplied 1340l/min, and a tank for 360 liters of water to extinguish fire.
![](/profiles/img/18819-984-s.jpg)
Thank you very much for stopping by and comment, Villiers de Vos. You are to kind Mate. But yeah, I'm enjoying it a lot.
![](/profiles/img/user-s.jpg)
Very nice and detailed build, thank you for very helpful photos and comments. Can you suggest me, please, some good source to learn how (from which point to where) to draw cables in German BMW and Zundapp bikes, please? Your pictures are detailed, but sometimes I´m not sure, which cable is it, in other picture.
Thank you very much.
![](/profiles/img/18819-984-s.jpg)
Thank you miloss for your words.
Well, my album is certainly not the best place to understand how to put wires and cables in the BMW.
I did my wiring by looking at a lot of images of this motorcycle available on the internet and also some knowledge acquired since I was little because I have always ridden motorcycles.
I'm not an expert or rivet counter but I can say that there are always n cables, some electrical and others steel, that connect, for example, the levers to the brake hub on the front wheel and to the clutch. then there's the accelerator that goes to the carbs, there's also the speedometer cable that goes from the front wheel to the dial.
Then do we have electrical cables that go for example from the spark plugs on the pistons to the alternator? and all the lighting cables coming out of the battery, to the front and rear lights, etc.
So if you want to get it perfect what I can advise is a lot of research on the net maybee try to find the diagrams of the complex electric systems and also on YouTube, there are lots of this bikes with lot's of fan's still nowadays, so you will find What you're looking for. I hope this helps, a bit 😉
![](/profiles/img/user-s.jpg)
Hi Rui,
thank you very much for your answer. I´d like to accentuate, that your amount of pictures, done during building of models is not usual in positive meaning of words, and so I´m really grateful for it. My intention was not to diminish your effort, only to point to my lack of knowledge and ability to fully use them for my own education. And yes, my question is a part of my searching on internet for good source of information. Different of you , although I´m not a young boy already, I´ve never ridden a motorbike. Actually I started to like motorbikes (old veterans I mean) only since my , let´s say, upper age. 😮 🙂 So I have to learn a lot. I love books, but they can be expensive and to buy something and then realize it was not worth money is not optimal way of learning ... but it´s also learning, isn´t it? 🙂
Thank you very much, have a nice day!
![](/profiles/img/18819-984-s.jpg)
Hi miloss,
Thx again. I didn't understand your comment as derogatory, quite the opposite.
I appreciate the same and apologize if my answer or English words chosen were or sound arrogant, as that was clearly not my intention so i'm hoping no harm done.
I understand What you mean and I'm sending you a private message so I can try to help a little more and talk about the matter at hand 😉
![](/profiles/img/user-s.jpg)
Hi Rui,
thank you very much! No harm was dome, don´t worry! I´m also not very clever speaker in English, it´s much better in Slovak, I think. 🙂 The way of thinking and speaking in my language is different comparing to English - there are some cultural differences, what´s OK, but can cause difference in what wanted to be told and what was told. 🙂Thatś why I´m not always sure, how my questions sounds to other people. And I don´t want to be rude (without reason). 🙂
Thakk you very much for your PM.
Keep well!
Miloš
![](/profiles/img/18819-984-s.jpg)
Hi miloss,
Ok, nice, for me would be better in Portuguese 😄 otherwise misunderstanding can always happen, and hey, you're younger than me 😉
Cheers.
![](/profiles/img/20442-422-s.jpg)
If the main language of Scalemates was Portuguese, Slovak etc. I wouldn't have a clue what was going on. Everyone on here who speaks English as a second language deserves respect from those of us who use it as our native tongue. In fact, it's often embarrassing when many of you write English far better than many of the English.
Rui: your scratch building on the truck is excellent. I love the way you made the back fenders/mudguards.
![](/profiles/img/user-s.jpg)
Hi gorby,
let me ask you, please:I see that you started Panzer Soldiers Set 1. Are you able to remove molding lines of miniatures and do not destroy all details around, please? Because I´m not. So I would really appreciate some advice, how to do it. I tried thin cement, to freeze it and use low temperature, to use acetone, and, of course, sand paper, scalpel and razor blade. Razor blade works, but it´s too big to use it in area around delicate details.
Thank you very much.
Cheers!
![](/profiles/img/18819-984-s.jpg)
@ gorby, thank you for your words and understanding. One thing I'm sure, my English is rough and I wish I had your sense of humor, or at least be able to transmite mine in English as perfect as you do with your 's in all your álbums, like the introduction words of your panther 1/48 project.
Let me introduce you to my first and ONLY attempt to model a tank with a full interior. | Album by gorby (1:48)
Outstanding. I always laugh and enjoy reading your comments.
As to the fenders I think we both have that improvisation in common, right? So Thx again.
@ Miloss, I think you should ask gorby about his project's on his albums. Please don't get me wrong. I don't mind you doing it here, but I thing it's fare enough if you you do it in Gorby albums, they surely deserve it.
Btw I never was able to remove 1/72 figures seam lines
So thank you both.
![](/profiles/img/20442-422-s.jpg)
Hi Miloss, the Panzer soldiers set is my first experience of Orion figures and I was quite impressed with them, they are the best 1/72 figures I've tried. Mine only had a faint seam line on most of them although there was a few which needed trimming. I found a sharp scalpel used with a sawing action worked well enough and then, if that left a rough patch I used Tamiya Extra Thin. Do you know that you should prime the figures before painting with diluted PVA glue? I used plastic primer on top of that as well. I hope that helps.
Thanks you for your kind words Rui. It's particularly pleasing as I had to re-learn to speak and write after a stroke 18 years ago.
Isn't Scalemates a lovely place? 🙂
![](/profiles/img/user-s.jpg)
Hi guis, thank you very much for your answers and sorry for my question placed on not correct place. I'm really not a fan of social medias and my knoleadge of the manners there are really poor. I felt the post similar to Room of discussing people and I wanted to use opportunity to ask someone who is present there.But you are right, no doubts, and I know how to do it correctly, next time. 😁🤔👍 Thanks.
Cheers!
P S.: I tried Extra Thin glue and scalpel, but with poor success. But I didn't know anything about diluted PVA. Thanks!
![](/profiles/img/18819-984-s.jpg)
@Gorby, I'm sorry to know about your misfortune but very Glad that you recover very well from that stroke Mate.
I'm 100% with you, scalemates it's a lovely place 👍
So Keep safe.
@Miloss, I'm sure, no harm done. 🙂
Cheers
![](/profiles/img/78736-860-s.jpg)
Great craftsmanship Rui. Two major projects in one build! The Zundapp looks wonderful and I am sure the ZIS will too very soon. Looking forward to seeing the next steps.
![](/profiles/img/18819-984-s.jpg)
@Neil thank you very much for your kind words and for stopping by and comment. Yah I'm back from holidays and I've to restart working on this project. It will be a long one as all my other work but hopefully I will manage to do something that will make me proud.
P.s. it's a BMW 😉
Thank you Tom Harris (MHBeergeek) for the 53 like. Much Apreciated
![](/profiles/img/78736-860-s.jpg)
You're welcome Rui. Duh, How did I make that mistake? I think I was probably just too distracted by the fine detailing! 🙂
![](/profiles/img/18819-984-s.jpg)
Thank you very much Neil.
No harm done 😄 on the contrary.
Thank you tom svk-atfor the 54 like. Much Apreciated
![](/profiles/img/18819-984-s.jpg)
Thank you Jac Fleming for another 54 like on this album. And Hang Li fot the 55...or should I say the 56 🤔
Much Apreciated
![](/profiles/img/102691-453-s.png)
Fantastic scratch build elements!
Really like them, they´re looking great 👍
I'm already curious how it will look finished.
![](/profiles/img/95177-962-s.jpg)
Remarkable work,
congratulations for the detail work on the vehicles.
![](/profiles/img/118183-835-s.jpg)
Is that a water pump in the back of the ZiS? Amazing level of detail and scratchbuilding Rui!
![](/profiles/img/14298-181-s.png)
Will this give us frost bite Rui. ? 😉
I can imagine all kinds of scenarios and blood in the snow is one of them, if a field ambulance is required. 👍
What are you using for the bolts that will be holding all your timber add on's. ?
Brass pin nails like the naval modellers use for their planking are good. :-/
Love your work mate. 'No covid blues here' obviously. 🙂 👍
Cheerz .😉
![](/profiles/img/18819-984-s.jpg)
@Simon, thank you for your comment and vote of confidence. I'm also very curious how it will end 😉
@Pietro, thank you for stopping by and your kind words. Appreciated.
@John, thank you very much, I can say that you nailed it.
@Villiers, you are to kind Mate. Thank you.
@James thx Mate .I'm really glad you like it.
@Kezza, my friend, thank you for stopping by and comment. I'm really glad to hear from you Mate. Hope everything is good now.
Well, I'm trying to keep some secret about this one, but I can say that, yes it will have blood (but not on the snow), and that John as raised the tip of the veil 😉 😄
You know I'm not a rivet counter, so I think this will not need any visible bolts.
I also would like to thank all the 60 mates that pressed the like in this one and also on my other albums. Appreciated
![](/profiles/img/18819-984-s.jpg)
Start working again on this project, and the mojo comeback 🙂
Also thanks for the new likes. (thx to all 63 mates).
![](/profiles/img/32137-155-s.jpg)
Rui, it simply stated work of the highest standard. I am glad you have your mojo back.
What is the kind of tape that you used to make the hoses please?
![](/profiles/img/18819-984-s.jpg)
Hi Villiers, thank you for your kind words Mate. I've used it before in my project
Outono / Autumn 1944 | Album by mig (1:35)
To simulate zimmerit.
It is used by wall painters when they have to mask out circled areas. it allows you to extend (straighten) one side while keeping the other side short and rough.
And yes, I'm such a slow modeler that I also really enjoy when I'm motivated.
@ ribellinu, Thank you for the 64 like. Appreciated
![](/profiles/img/18819-984-s.jpg)
Starting the bodywork, paintjob. Complitely noob on shiny paint work... The only gloss kit I have is a 1/72 Kubelwagen from centurys ago when I only had some clossy paints and brushes.
Some dry fiting test also.
Getting ready for the marriage.
@ Villiers de Vos 👍
@ DaveTheGun, Thank you for the 65 like. Appreciated
![](/profiles/img/18819-984-s.jpg)
Thank you Kyle, I'm glad you like it and comment. Apreciated
Also, thank you and to David (DaveTheGun), and Robert Hessler (RobCol)
for the 3 new likes, 68.
![](/profiles/img/99811-836-s.jpg)
Your building proces is really mind blowing... Perfection in the smallest detail.
![](/profiles/img/18819-984-s.jpg)
@ Kyle thx again, you are to kind.
@ Mathias, thank you very much for your kind comment. Don't we all seek that impossible aim 😄. ? Much appreciated comment.
@ Villiers de Vos, thx for your support & motivating comments Mate, you are so kind.
And thank, Viacheslav (touristTula) & Dmitry Melnikov (Ditrich) for the 2 new likes, 70.
![](/profiles/img/18819-984-s.jpg)
@ Riho, Thank you for your interest and comment. I hope you will find this interesting till the end. Obrigado 😄
@ James, Thank you for your comment. Apreciated. My redemption from ZIS - 11 or PMZ - 1, is nearing completion.
And thank you Dmitry Melnikov (Ditrich); Raditz; Neil (djferrisbueller) and Mark K (Ladislas) for the new Likes. (74).
I've uploaded some more scratch detail work on the kit. I Hope you find it interesting, I sure enjoyed doing it a lot.
![](/profiles/img/32137-155-s.jpg)
Very nice work so far. It is a joy studying the small details in each photograph.
![](/profiles/img/14298-181-s.png)
As always. It's a trip back in time and a great rendition of that moment in time. Then, there is the detail. Thanks for the pleasure you give us all when admiring your skills.
None better. 👍 🙂
![](/profiles/img/18819-984-s.jpg)
@ Villiers de Vos, thank you for your kind comment and continuous suport, very apreciated. I'm really glad you like the detailing.
@ Kezza, thank you my friend. you are without a doubt one of my main mentors here. It was with you and through your albums that I learned a lot, and I even tried to use your sharing methods in my Albums. It is fair and deserves my respect and public recognition for what I am saying. I am far from reaching your heels but your support from the beginning was one of the reasons that led me to try to do more and better. so thanks for your support. for me it means a lot and I am always proud of your comments. Thank you for your unconditional friendship, without it I would not be what I am in scalemates.
P.S. if I'm something at all. One thing I'm sure, I'm for ever grateful to you.
![](/profiles/img/18819-984-s.jpg)
Now lifting one more edge of the veil, reveling a little more about this project, I leave you with Sturmbannführer Kurt Meyer (nicknamed "Steel Fist") , commander of the motorized reconnaissance battalion "SS Leibstandarte" memories, about that noon on Wednesday, October 8, 1941:
(...)- My armored car drove into a round city square. Trams were moving in our direction, and trucks, horse-drawn carts and hundreds of people were spinning around. My armored car almost ran into a fire truck, the driver of which stopped in confusion. The second armored vehicle, which was following mine, suddenly opened up with a whole hail of fragmentation shells, and the fire truck, frozen in front of me, was literally torn in half!
Next, the machine guns of our motorcyclists rumbled, echoing with an eerie echo somewhere in the courtyards of the houses surrounding us. (...)
![](/profiles/img/48972-166-s.jpg)
Your skills and perseverance are simply impressive, Rui. Keep it up!
![](/profiles/img/18819-984-s.jpg)
Thank you very much for your comment and encouragement Robert, much appreciated.
The clean and shiny version (Diecast type with a little accident) of the fire truck is almost finished.
I just need to take more photos.
![](/profiles/img/14298-181-s.png)
As always. Your skills and attention to the details have shon through mate. Well planned and executed. 👍 👍 🙂
What will next year bring I wonder. ? hehehe
More surprises no doubt. 😉
Happy New Years too mate.
![](/profiles/img/18819-984-s.jpg)
Hi Kezza, thanks for your nice comment. Apreciated.
You Know mate, I realy fell proud doing this original, never saw one built, so... 😉
Anyway, at the start of the new year I want to finish this dio, so let's see how long it will take 😄
Best wishes to you and a Great and Healthy New Year 👍
![](/profiles/img/20442-422-s.jpg)
WOW! The fire truck is fantastic Rui! Up there with the best modelling I've seen on Scalemates.
![](/profiles/img/18819-984-s.jpg)
@ Villiers, thank you very much for your comment and kind support. Happy 2023, Mate.
@ Kyle, thank you for your comment, glad you like it.
@Gorby, thx a lot for stoping by and comment. You are to kind mate. I know very well your scratch skills and originals, and I also know I'm still some miles away from the best modelling here, but always learning on each project and so, improving.
@ Mathias, thank you very much for your kind comment. Apreciated, and it means a lot.
Thank you also for the new likes and to all, Happy 2023.
![](/profiles/img/18819-984-s.jpg)
Frankenstein at work. This was easy the poor guy was already dead. Last figure worked out.
![](/profiles/img/118183-835-s.jpg)
Nice work Dr. Frankenstein! Very realistic pose of an unfortunate participant.
![](/profiles/img/18819-984-s.jpg)
Thx a lot John. Apreciated.
Yap, obviously some work still to be done, but I'm also quite happy with the pose.
![](/profiles/img/18819-984-s.jpg)
Started the new challenge. Making a good interesting scratched base.
For those interested in this historic events or If someone wants to know more about this episode, you can translate from this interesting UKRAINE site:
dniprovsky-project.b..om/2021/07/1941.html
It also has a video, but unfortunately without subtitle's.
![](/profiles/img/32137-155-s.jpg)
I am still nailed to my chair. Following each development, big and small with great interest.
![](/profiles/img/18819-984-s.jpg)
Thank you very much Villiers de Vos, I realy apreciate your resiliance 😄 and the endeless suport. Thx a lot.
I've finished the scratched Tram Pole, it's ready for painting 😉
Another small detail but one less to do in all the scratch work I've been doing in this project.
They sure take double time, old fashion work, from finding the right pieces and work them to a viable result, at least for my hapiness.
![](/profiles/img/18819-984-s.jpg)
Start the work on the dio base.
I also want to thank all the new likes on this album. Apreciated.
![](/profiles/img/65866-287-s.jpg)
That cobble stone road looks fantastic! The manhole cover and tram lines are a nice touch as well 👍
![](/profiles/img/18819-984-s.jpg)
Well mates, I love this hobby yes, but with the kind words of support from such talented friends, I enjoy it even more.
Thank you all, I really fell great with such comments, they help me endure any hardship I encouter. Let's see if I can keep up with the standards.
Thank you also for the new likes.
![](/profiles/img/14298-181-s.png)
Rui. I do hope that all those cobble stones came in a packet mate. But knowing how enthusiastic and fussy you are about your work. I wouldn't be at all surprised if you hand picked them from some construction site. 🙂 🙂 But as always. Your the best. 👍 👍 😉
![](/profiles/img/78736-860-s.jpg)
Just catching up with your amazing project Rui. Quite apart from the fantastic modelling, it was great to see the photos from this event all in one place. I think most of us have seen some of them before, but the books I have seen them in do not give much context or info about the actual events they depict.. Your extra research makes the whole project historically fascinating too. Great work!
![](/profiles/img/121200-814-s.jpg)
1. in my little opinion, as a rule, there is always a puddle from the inner thread of the rail of the tramway, or it dries up or has just formed 2. too clean street too clean path. although I myself love cleanliness, it's hard to achieve cleanliness on the street for a number of reasons independent of each other
![](/profiles/img/18819-984-s.jpg)
Some progress done, I've start painting figures and weathering the tram pole, truck, and a bit more on the bike.
@ Pietro, Thank you, glad you like the base. Still work to be done but I'm happy the way its going,
@Kezza, Thx Mate. The cobble stones had already appeared in this album (photo 18). They came from a beach in Algarve.
@Neil, Thx mate. Yap this events are very well documented, as i discovered with the progress in my research.
I also would like to thank Austin Steenkamp; Lothar29 and all the new mates that pressed the like botton. Apreciated.
Still a lot of work to finish the dio, but I've now a glyinps of the final result.
![](/profiles/img/32137-155-s.jpg)
The motorbike and crew is a beautiful little gem. The wear and tear on the backrest of the sidecar is a nice touch.
![](/profiles/img/95177-962-s.jpg)
Amazing crew and motorbike Rui!
I'm so sorry, from the bottom of my miserable modeling and cultural historical skills I would never allow myself to give advice but if the scene is set in Mariupol during the Battle of the Sea of Azov in 1941 the BMW R75 if I'm not mistaken was not yet available for the German Army, the model available at the time was the R12.
Anyway great work, congrats!
![](/profiles/img/18819-984-s.jpg)
@Pepe, thx
@Mathias, thank you for your support, I hope you are right.
@Robert, thanks for your kind comment. I was nicely surprised on how fast they got into this result. I think they are well sculpt and has they say, when you have that one's "they paint themselves easily"?
@Guy, I'm glad you think so. Thank you for that
@Shar, welcome and thank you for your comment and like. I'm also hoping in the end, to have that nice overall impression to be satisfied with all the effort applied on it.
@Villiers de Vos, what to say to your always motivating comments, thx a lot? I'm glad you noticed that soft weathering too. Apreciated
@Pietro, thank you. I'm pleased you like the R75 and crew. Has to the historical accuracy I will respond next.
@James, your comment is always very apreciated. I know and recognize the high quality of your work, so it's most rewarding to see you stopping by. Thx
![](/profiles/img/18819-984-s.jpg)
Now Pietro, you probably right, that it should be a R12, but has you can see the matter was already discussed up in this album with Oliver early in 23 November 2021.
When I started the BMW I only had the idea of making something different from what I had been doing, than I thought about Poland invasion but that was a blunder has Oliver pointed out. So I changed plans and look for a date when the BMW was already running. And 1941 was the beginning of that.
In BMW Group Archive, I found that:
In 1941 the production of civilian motorcycles was stopped. Germany was at war and production was adjusted to the needs of the Wehrmacht. BMW motorcycles have always been popular with authorities - and thus also with the military. Single-cylinder models were used as light courier and training machines, and the R 12 was delivered to the Wehrmacht as a side car.
However, the war policy of the Germans required a motorcycle Side car that could be safely mastered on any surface - mud, ice, gravel, desert sand - and that required only little maintenance even at extreme temperatures and heavy loads. In addition, the motorcycle should also be able to cope with longer distances at low marching speeds without any problems.
No German motorcycle manufacturer had such a machine in their range, which is why a special development order was placed with BMW and Zündapp. In the winter of 1938, BMW began work on this project based on the R 71 engine. The beams of the bolted tubular frame were divided. This enabled the engine to be installed and removed quickly, as the lower frame part could simply be folded away. A rear wheel suspension was omitted for better stability. But while the frame proved itself during the test drives, there were thermal problems with the side-controlled motor in off-road use and on longer trips at walking speed. So BMW developed a new engine.
The result was a 750 cc unit with an output of 26 hp at 4000 rpm. The engine developed an enormous torque and, since it had a very low compression ratio of 5.8:1, it could also easily tolerate poor-quality or synthetically produced fuel. In contrast to the R 71 engine, no heat problems occurred during testing, so that the R 75 could go into series production in 1941.
And
Series production of the R 75 begins
date from07.1941.
Description
In July 1941, the first R 75 sidecars rolled off the assembly line in Munich. However, after production was relocated from Munich to Eisenach in June/July 1942, the majority of the R 75 was manufactured in Thuringia. The R 75, with seven forward and two reverse gears and a powered sidecar, was specially developed and produced for the German Wehrmacht.
![](/profiles/img/18819-984-s.jpg)
So my conscience his ok with using this kit has eventually a single replacement new side car in October, for the first SS division formed based on the Hitler personal bodyguard regiment ( probably with a great influence) in theory it could be possible?. Has said already above in this album I'm not a rivet counter (I can't read the licence plate in one of the reference photos, the one that looks like a Zundapp?...just joking 😉) and my dioramas don't intend to be historically correct they simply aim to be ideas historically based, with lots of the so called "artistic" liberty.
Anyways Thx again for your comments. I apreciate them all.
![](/profiles/img/23938-707-s.jpg)
Awesome progress Rui, I love the expressions on those motorcyclists' faces 👍
![](/profiles/img/14298-181-s.png)
Hi Rui. 🙂 🙂 🙂 I have just finished browsing through you work using the mosaic view and pulling up the ones I saw that showed the detail you included.
It took a LONG time to do as every image had something of interest and wonderment included.
No need to say your attention to detail is superb, as I have said it every time I see your work, especially with the images of the original scenes in black and white you have used to help you define that moment in time.
It takes a while before the smile on my face goes after seeing what you have accomplished.
It really is hard to separate the final results from the images you used as reference material.
That is some skill you have my friend and there is not one build I have seen of yours that one can find any sub standard workmanship.
Your skills and abilities are truly something special mate.
Thank you for all the years of enjoyment and inspiration. 👍
Cheers good buddy. 🙂 👍
![](/profiles/img/18819-984-s.jpg)
@Alec k, thank you, glad you think so and like them and yes this figures are well sculpted.
@Gary, thank you for stopping by and comment. Apreciated. Not the best motorcycle kit in the market I think but it was a nice kit to build and improve. Thank you for your like too.
@Kezza, my friend, your words put a big smile on my face. Thx a lot Mate, coming from a Master makes me feel very proud. Also Knowing that my work was interesting enough for you to have all that work and time spent looking at it ... Yap makes me feel Great and motivated for doing better every time.
I know I should be more selective in chosing the lot of photos I upload but as I've a lot of work in improving the old models I find difficult not to share that in here, so I end up uploading more than I should, but hey, that's just one of my disabilities.
I really enjoyed reading your comment. Thx again good Yoda 😉
![](/profiles/img/14298-181-s.png)
Hi Rui. 👍 I am pleased to know you 'rescue' some of your builds. 🙂 I have from time to time pulled a few off death row and repatriated them to their former glory. Just as much fun as unpacking them for the first time. 🙂 Right now, I am eying off the Erickson Sky Crane from ICM in 1/35 scale. But I want to do it as the 'Elvis' fire fighter. Bright orange with a huge tank slung under the rotor and engine assy. Almost $300.00 AU. But with the war in Ukraine, it's understandable. Also. I am eagerly awaiting the 1/35 Mi-28 'Havoc' Russian attack helicopter from Meng. The 1/72 scale was a shit model. Happy Easter my friend. BTW. I meant every word about your skills and abilities. You have given me so many ideas and tips without saying a word. 😉
![](/profiles/img/18819-984-s.jpg)
Hi Kezza, I think I didn't express my self correctly as sometimes occour. I meant old kits and not, my old models. That ones I never go back and touch them, not because i don't fell that urge, it's more because they tell the story of my skills at the moment I built them and so I like to see what progress I'm geting from newer experiences. So I let them stay like they where when I finish them. Also, I've so many kits in stash that I prefer to start a new project from scratch. If not I always consider that a model his never completelly finished, so it would be a never ending process arround the same subject, plus you know I'm a very slow modeler. I always have to enjoy one less on the stash.
Anyway, I'm looking forward to see you Back in Action Mate, I missed that for a long time now, so I'm eager to study your new albums. Please, go for it, you know my scale is 1/35; 1/32 right👍
Happy Easter to you too, my friend and thx again for your kind words, they are always most welcome. I'm really happy to know that my work still has some tips for the interested mates, that makes me try harder to work better, (and ofcourse some abuse in uploading it) 😄.
@ FTilhonLinden, Thank you very much for your kind comment. Much apreciated and I'm really glad you like my work here.
![](/profiles/img/14298-181-s.png)
I did misunderstand, but 'no foul' as they say. hehehehe I am looking around for a display case that will take all my 1/32 scale birds and choppers, those being the 'Super Stallion, the Apache, and four Ju-87's and Skyraider, but with the two future additions, I will be pushing for space to put the case too. :-/ Not long now before I have the confidence to tackle an other big project. It's been a while. 😉
![](/profiles/img/110025-775-s.png)
That is a very nice BMW Combination, kudos on your figure painting. The dio' looks pretty nifty too.
![](/profiles/img/128829-863-s.jpg)
I know its been mentioned by others, but your attention to detail and the documentation of your process, is very impressive Rui. It inspires me to build the R12 in my stash to your standard. I will be referencing your work when the time comes and for that I thank you. I was really impressed by the painting of the bike riders. They wonderfully painted and the expression on their faces you brought out, is superb. The scratch building of the fire truck is a stand out and the cobbled street is beautifully painted. Bloody good work Rui 🙂
![](/profiles/img/42719-603-s.jpg)
Mr James says it all. - To me picture 313 seems to show the completed diorama. More photos would be more than welcome!
![](/profiles/img/108061-471-s.jpg)
This has been great following along with. A really stunning result. The attention to detail has been next level across the board.
![](/profiles/img/36134-969-s.jpg)
It's all been said above... Superbly detailed and the figures are really realistic.
Like Neuling, suggested, more photos with a cleaner background would make your dio more justice! Congrats, Rui!
![](/profiles/img/130099-650-s.jpg)
This is a very titanic work ... I am delighted with the realization of this idea! You are an incredible cool modelist because this work is truly difficult. I am pleased that you have chosen the subject of Mariupol because it is the city of my student years. Thank you for it! I will look forward to new works!
![](/profiles/img/100080-539-s.jpg)
Hi guy !! I'm very impressed by your face painting.. It looks sooo human !!!!! 👍👍👍
Album info
First time doing something vacu & Miniart.
I will try to make a coppy of the pavement and building in plaster. Fingers crossed.
After having to abort the first idea in Socharzow, Poland1939, I found the new inspiring photo for this project (afterwourds I found that the autor, was SS Paul Augustin) .
First captions on the net, referred it to Rostov-on-Don.
Then I found a new photo referred to end of 1941, with the same scene minutes or hours earlier.
If there where 2 photos of the same scene, there could be more and hours/days of research (in this marvelous internet endless source of information), led me to find new photos of the scene, with all these I luckly could find the exact location of the scene:
150 meters from Staraya vodonaponaya tower at the intersection of Soborna st., with Myru Ave, the main route of penetration into MARIUPOL, coming from the west.
I now feel very lucky to found all this.
I will talk about the scene later on the build...