[Moderoid] Giant Robo (Job Log)
1
January 26, 2023Washed.2
January 26, 2023Using OYUMARU.3
January 26, 2023It is to replace the rivet expressed in the shape of a water drop in a circle...
But, the downside of Oyumaru is that it is difficult to duplicate multiple times in one mold.
The right side is the first copy, and the left side is the second and third copies.4
January 26, 2023So this time I decided to replicate it using silicone putty (siligum).5
January 26, 2023I used uv resin.6
January 26, 2023Because I didn't make the mold the right way and roughly pressed it, I got a less stamped part like the marked part.
Anyway, even if I took several copies with one mold, all of them were copied cleanly.7
January 26, 2023I need to temporarily assemble the ankle parts to check the location of the duplicated rivets, but I cut the male pins diagonally to make it easier to separate.8
January 26, 2023Remove the rivets in problem...9
January 26, 2023Trim with files, knives, nippers, sandpaper, etc...10
January 26, 2023I also worked on bracelet in the same way.11
January 26, 2023The joint parts were attached with plenty of adhesive, and only the bonded lines were removed, and it seems that there is no need for additional painting. (Red Arrow)12
January 26, 2023Washing with dark brown and brushed the convex area.13
January 27, 2023Now I have to paint it once, so I mixed the blue color as close as possible to the color of the plastic.14
January 27, 2023I only painted the rear head because I had to assemble the head together with the face and then deal with the bonded line.15
January 27, 2023The muzzle of the waist was blocked, so I pierced it and sanded the parting line, and the marked place was over grinded. I will just pass.16
January 27, 2023Since I have to paint while assembling, I painted the parts to be assembled together first.17
January 27, 2023I painted the black parts metallic black, but it was too shiny, so I tried gunmetal, but it was brighter than I wanted.18
January 27, 2023What I wanted was a heavy cast iron feel, so I decided to paint it black and express the texture with drive rush.19
January 27, 2023Each part was assembled and the bonded line was also trimmed.20
January 27, 2023The part that looks like a toenail was awkward, so I got rid of it, and cut and attached pla-plate.21
January 27, 2023Apply the duplicated rivets.22
January 27, 2023Apply the duplicated rivets.23
January 27, 2023Apply the duplicated rivets.24
January 27, 2023Apply the duplicated rivets.25
January 27, 2023The weather has been so cold lately that I couldn't paint, so I decided to trim the doll. (Here is late winter)
I trimmed the bonded line of the hip.26
January 27, 2023The clogged part of the shoe heel was shaved off.27
January 27, 2023I was curious about the proportions, so I tried to assemble them.
Fantastic body proportions.28
January 31, 2023I painted black base layer to make it look like a stain later.29
January 31, 2023However, it failed because the shielding power of the custom mixed paint was too good.30
January 31, 2023At the end of the exhaust port, GSI's graphite color was painted.31
January 31, 2023The inside of the exhaust was painted in 'musou black', similar to 'Vanta Black'.32
January 31, 2023The doll parts were base layer with a Vallejo white primer.33
January 31, 2023Hey, you'd be in trouble if you forgot us...34
January 31, 2023As it turned out, it was a part that should have been in the marked place.
It was painful to disassemble the area that had been re-edited several times because the adhesive line was not well removed.35
January 31, 2023However, since it is impossible to assemble without these parts, the only option is to disassemble them...36
January 31, 2023Now assemble the bracelet and anklet and remove the adhesive line...37
January 31, 2023Then, stick 48 big rivets.38
February 1, 2023Masked.39
February 1, 2023Gray surfacer.40
February 1, 2023IPP red.41
February 1, 2023Mask offed and painted GSI smooth clear(matt).42
February 1, 2023After darkly coloring the shadow part of the doll's skin...
The dress is expressed so that the flesh color slightly shows through the chest, hips, and lower belly.43
February 1, 2023The light skin color was applied to express the contrast of the soft skin.
44
February 1, 2023I painted each base color.
The china dress was lightly coated with white pearl.45
February 1, 2023Hand brushed.
It took about 6 hours just to hand painting.46
February 1, 2023The joints of the hands also need to be painted.47
February 1, 2023Decal done.
When attaching the female eye decals according to the mold, the distance between the eyes would be too far, so I ignored the mold and pasted it on the place I liked.48
February 1, 2023To finish, I sprayed GSI smooth clear.49
February 2, 2023The booster nozzle was empty, so I decided to fill it with black.50
February 2, 2023Cut the Hasegawa matte black sheet paper with a circle cutter...51
February 2, 2023Applied as left.52
February 2, 2023I can't use enamel paint because of the headache. So I did a dry brushing test with water-based paint... but I think can't use this.
I'll try rubbing it with the Tamiya Weathering Master.53
February 2, 2023I have never washed it with water-based paint, so I tested it.
On the left, I only tried black wash, and on the right, I tried a few more.54
February 2, 2023Tamiya Weathering Master Test.
O.K. It looks like this could be used.55
February 2, 2023Now I attached the breast to the skirt and trimmed the adhesive line.56
February 2, 2023Masking...57
February 2, 2023I painted the customized blue and coated it with GSI smooth clear.58
February 2, 2023Assembled the doll while the clear was drying.
The shoes were painted with Tamiya acrylic clear (glossy).
It's not my area of expertise, so I think this is my best quality. 😉59
February 3, 2023I assembled a few things for weathering.60
February 3, 2023I assembled a few things for weathering.61
February 3, 2023The booster was only drive-rushed with Tamiya Weathering Master Gunmetal.62
February 3, 2023I washed it while saving streaking with Vallejo 'Wash'.63
February 3, 2023I washed it while saving streaking with Vallejo 'Wash'.64
February 3, 2023I washed it while saving streaking with Vallejo 'Wash'.65
February 3, 2023And, I finished it after adding a little more detail using Tamiya Weathering Master and 'GSI Weathering Liner'.
I thought about chipping, but since it is a very large robot, it would rather reduce the sense of scale, so I omitted it. - Actually, it was annoying 😉66
February 3, 2023At the end of each muzzle, the soot was painted with graphite color.67
February 3, 2023In the front, the area around the muzzle was painted with soot and weathering was finished.68
February 3, 2023Expressing soot around the muzzle and the part where the heat of the booster touches...69
February 3, 2023Finally, just assemble it and you're done!
I took a picture of Tamiya adhesive for size comparison.70
February 3, 2023Done71
February 3, 2023Done.
Comments
10 26 January 2023, 18:18
Album info
FHD images are here.
Job Log 1/3 - motorart.tistory.com/615
Job Log 2/3 - motorart.tistory.com/618
Job Log 3/3 - motorart.tistory.com/619