A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | No. RS32-0001 | 1:32

Fatos

Marca:: ResKit
Título:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Número:: RS32-0001
Escala:: 1:32
Tipo:: Acessório
Lançado:: 2020 Produto novo
Código de barras:: 4589913295353 (EAN)
Tópico:: Grumman A-6 Intruder » Jatos (Aeronave)

Projetado para

Este conjunto de detalhamento foi projetado para:

Trumpeter

2013

2014

Produto novo

Peças novas

Mercado

Lojas online

USD 15.37Em estoque »

Mostrar todas as ofertas » (10 no total)

SKUs alternativos para ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Nota: Preços e disponibilidade são apenas indicações. Verifique se o produto realmente corresponde à entrada!

Avaliações

Revisões externas

Não sabemos sobre nenhuma avaliação para isso A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) de ResKit.

Comentários

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38

Material de referência

Grumman A-6 Intruder (Phoenix Scale Publications 18)

Grumman A-6 Intruder Airmark in Profile & Scale

Modellers Airguide No. 18

Andy Evans

2024

A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...

Colors & Markings Series No. 7

Rock Roszak, Mike Heideman

2023

Todos os livros » (28 no total) Todos os <em>walkarounds</em> » (15 no total)