Notícias

Martin Oostrom
That background hurts my eyes 😎 but it does provide a good contrast.
How were the extra goodies working out for you? The truck looks great.

Goldman
Hello Martin,

Thank you!

I did change my background in later projects...

The dashboard was nice but being just 2D painted PE it didn't add a lot on top of the kit decals. The PE set was very nice. The steps, radiator mesh, deck plate and the stacks heat shields looks so much better (to my eyes) over the plastics parts. The stack heat shields were a challenge to bend and mount but I managed to coerce them into place.
Didn't bother to replace the bars on the radiator shroud though. Seems like a lot of work for very little improvement over the plastics ones.

Martin Oostrom
Now I know where to look, those parts do look really good.

Spanjaard
i am certainly in 🙂
very nice scratchbuilt interior details 🙂

Patrick Hagelstein
Curious about those brass wires.... 😉 Let's be surprised.

Oleg Bogolei
interesting. following)

Holger Kranich
Oh a new detail-orgy! Ronan the stage is your´s! 😄

Ronan
Thanks mates,
@ Patrick : the brass wire is for floor heating

Harry Eder
Hallo Ronan!
I´m following too! 😉 Fine start indeed!
The seats are from pavla?

Ronan
Yes Harry, seats are from PAVLA😉

Patrick Hagelstein
Thanks Ronan! Can't wait to see it painted up!

Patrick Hagelstein
Wait a minute... Do British pilots have cold feet then??? 😉

Ronan
I would say that all lynx pilots have cold feet : all lynx are feated with floor heating😉

Philip De Keyser
Following this one, nice start Ronan! 👍

Ronan
Many thanks😉

Patrick Hagelstein
Wow, that floor heating really came to life! 👍

Laurent VILLANUEVA "HELLER-forever"
je vais suivre cela , bravo !

Zsolt Czegle
Following of course!

Cuajete
Looking very good so far. Following!

Ronan
Litlle surgery update 😄

Burkhard D
Pass the popcorn, I'm in! 🙂

ice
Ähm - wow?
I'm in too!

Konrad -
Thats amazing just amazing 👍

Cuajete
Interesting exterior details!

Ronan
Many thanks😉

Ekki
Watching.

Oleg Bogolei
Good that i have finished mine Lynx before you started yours)))

Stefan Schacht
nice start, i take a seat

Ronan
😢

Łukasz Gliński
Oh no, I didn't manage to join Oleg and here comes another lesson titled "How much you can improve your helicopter kit"... 🙁

Harry Eder
Anyone here who would like to buy my Lynx kit? 😉 Very nice improvements Ronan! 👍

Ronan
Thanks Harry😉

Harry Eder
Can you copy all this improvements and send them to me Ronan? 😄

Holger Kranich
Harry, you take the words out of my mouth! Gorgeous work!

Łukasz Gliński
@Harry: wrong topic to look for buyers here, nobody here would even try to compete after seeing those pics 😄

Bart Goesaert
Wonderfull work as usual, but one never stops being in awe... superb

Harry Eder
@Łukasz just give me a try... maybe is anyone crazy enough 😄

Thomas CONAN
Awsome from the the DIY master😉 J'en suis.

Laurent VILLANUEVA "HELLER-forever"
Quel talent , fabulous !

Ronan
Merci les amis😉

Cuajete
Amazing work!

Alexander Grivonev
Helicopter guys raising the bar once again, magnifique!! 👍

Marc A.
Good work Roan, another pearl from you.. keep the good work

Treehugger
Nice work with the styrene.

Q: What is the thinnest sheet of styrene you have? The thinnest I could find when I looked the last time looking for this, min thickness was 0.25 mm.

Dave Flitton
Looking like an interesting build.

Aaron Liles
Fantastic

Patrick Hagelstein
There's 0,1 mm Plastruct available.

Ronan
I think the thinnest sheet is 0,25 mm from evergreen

Spanjaard
evergreen certainly have 0,13mm in white evergreenscalemodels..te-polystrene-sheets

Michael Phillips
Wow! This is scratchbuilding at it's finest... That is an art eludes me, so I give you the utmost props for your skill here!

Ronan
Many thanks, mates !!!

Harry Eder
Yes 0,13mm is the thinnest sheet from evergreen I know... it´s like paper!

Treehugger
If buying any, make sure you get the "white" selection, and not "clear". I nearly made that mistake today when ordering.

Ronan
yes Harry, you are right. Even using the 0.13 mm sheet, you will have to sand it when dry to make a thin strengthening plate adapted to the 1/72 scale

WAHO LEU
Brilliant! I admire you very much, seeing every plane, knowing that you need to connect the missing parts of each part to the model airplane. I like the superb technique of your model. I ask you if each part is machine made?

Ronan
Thanks Perry, evreything is hand made of course 🙂

WAHO LEU
Hi Ronan, Thank you for your reply, you are doing any aircraft is a masterpiece, admire. BRILLIANT!

Gareth Windsor
Looking amazing. Fantastic work.

Laurent VILLANUEVA "HELLER-forever"
nice...

Konrad
Ronan - as usually great work!

Ronan
Thanks for nice comments, mates !
Little update today : paint job in progress

Laurent VILLANUEVA "HELLER-forever"
SUPER ! encore un bel hélico de ta part , bravo...

Harry Eder
Very nice progress 👍

Ronan
thanks😉

Kees Kleijwegt
Amazing job Ronan!
As usual by the way 🙂

Peter Schmitt
Awesome effects with those rivets!

Ronan
😢

Harry Eder
Outstanding! 👍 How you did the windshield wipers?

Ronan
Thanks Harry, the windshield wipers are made from copper wire

Olivier
Quels détails, quelle précision !

Bart Goesaert
splendid work... as usual, but I can't repeat it enough...

WAHO LEU
Hi, Ronan, Hard to imagine, very beautiful. Great Job. I loving it so much.

WAHO LEU
Hi Ronan, In fact, you can be a manufacturer, make every part to us, so that I can buy

Ronan
I would like to be a manufacturer but i have not enough free time 🙂

ice
What did you use to paint the rivets? Toothpick or brush? They look great!

Ronan
i used a 2/0 brush

Bernhard Pethe
Better you can not build 72er helicopter. 👍

ice
I sceond that!

Burkhard D
A Mastermodeler at work. Inspiring! 🙂

WAHO LEU
Hi Ronan, Thanks your reply. You made the kit so shine! Brilliant! Brilliant! Brilliant!

Treehugger
Nice paintwork! 🙂

Ronan
Many thanks everybody😉

Dave Flitton
All of a sudden it looks like a real helicopter!!! Nice job

Stephan Ryll
Very nice build 👍

Harry Eder
Really amazing Ronan! 👍 But one question: are you getting old? No folded tail and rotors 😄

Ronan
Thanks Harry, i didn't want to do fold because it break the nice lines of this beautiful helo. But maybe a next lynx will be folded ... a black cat with folded rotor only😉

Harry Eder
Thx Ronan! You a right with the lines but in my opinion it also looks great folded 😉 Great news! I´m looking forward!

Ekki
Fantastic work. 👍

Cuajete
Scandalously good. Congrats!

Mirko Römer
Most impressive!

Christian Bruer
Excellent work 👍

Clifford Keesler
Most Excellent Ronan.

Ronan
Many thanks everybody😉

scalemates
fantastic! 👍

Holger Kranich
Masterpiece!

Olivier
Gee ! it's almost real.

Laurent VILLANUEVA "HELLER-forever"
du Grand Ronan !

Neuling
Chapeau Ronan!

Eric Duval
Superbe résultat Ronan, bravo !!!

Michel M....
beau model !!!!!!!!!!!!!! Le Lynx je l'ai pratiqué quelques années ..............

borisz
Excellent!
On a nice day I might copy it if you doesnt mind. 🙂

Bruce Huxtable
So glad this album has re-surfaced. What skills! I rather think this is pure magic!