Notícias
Christian Brueradicionou um novo álbum de fotos.
25 7 July, 19:44
Christian BruerPlatz / Eduard A-4 Skyhawk in an in flight display. The Scooter looks quite nice on the ground but really cool in flight. I am a bit curious how it will come out in the end.
Happy Modelling, Christian
7 July, 19:49
Christian BruerThx Spanjaard 🙂 It looks quite nice when in place, but I have one point with the acrylic rod I will use and the hole in the background to hold it. I thought about to place some cotton around it, but I am not sure. But let's see, time and test will tell.
11 July, 18:24
Bruce HuxtableReally neat, and subtle too. Can't wait to see the finished display 🙂
1 September, 19:14
Michael KohlAh. I thought the front had a special shape and wanted to know where you aquired it. But now I see that I was fooled by the white block in front of it.
3 September, 16:08
Mike Volkovquer este item
Bf 109F-4 Overtrees - Sprues only; no decals, instructions, mask or PE parts
Eduard 1:72
70155X 2023 Nova caixa 3 September, 16:08
Steffenmarcou este item como comercializável
31 August, 08:47
Milos CHi mate,
do you still offer this model M113 FItter?
Can you sand me some actual photos of your model - how it looks like - sprue, box, decals... It is old model.
And post costs to Czech rep. and/or to some box to Zittau (GER).
Thank you
milos.ciniburk@gmail.com
3 September, 16:08
Mr Dadicionou um novo álbum de fotos.
46 imagens
Beriev Be-6 flying boat/ By Playfix -Veb -Plasticart &Revell /72
No
Scratchbuilt
18 24 July, 16:32
Mr DThanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??
1 August, 15:31
Edouard CarrGreat idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.
1 September, 08:43
Mr DHi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍
1 September, 13:24
Mike711 » Solicitações de recursosI keep trying to add this item to my stash and if I go into the item page it says it is in my stash but if I go to my stash it's not there? I also can't get it to come up in the search option either?
Full scale Sopwith factory decal (Wingnut Wings 9110007, 1:1)
I'm a bit confused as to how I even found it on here now in the first place 😂
Any help would be greatly received.
Mike
3 September, 07:26
Spanjaardi think you copied and pasted the name from your previous post, instead of the link.... here it is since i see both posts in the newsfeed Full scale Sopwith factory decal (Wingnut Wings 9110007, 1:1) it will be easier for our webmaster
3 September, 11:44
DZI ДЗИ 
petrowquer este item
F-107A Ultra Sabre - painting masks + masks for disks and wheels
KV Models 1:72
72579 3 September, 16:06
Samuel1991quer este item
F-15E Strike Eagle Dual Roles Fighter w/New Targeting Pod & Ground Attack Weapons
Great Wall Hobby (GWH) 1:48
L4822 2018 Peças novas 3 September, 16:02
Didier Chartrainadicionou um novo álbum de fotos.
7 imagens
French Helicopter Pilot - ALAT - Bust - 1/10
1:10
Projeto: French Pilot ALAT - Bust
Scratchbuilt
8 2 September, 19:39
Desert Marlinadicionou um novo álbum de fotos.
37 8 November 2023, 21:10
Desert MarlinThis project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...
8 November 2023, 22:16
TreehuggerMaybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂
Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.
9 November 2023, 05:17
Desert MarlinI'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!
9 November 2023, 21:25
Desert MarlinGreat video of the weapon that goes with this version of the Mirage 2000N
Youtube Video
25 November 2023, 00:46
Desert MarlinAs I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…
20 July, 02:40
Desert MarlinSelected "most appropriate" tail tip and mounted the correct nose to fuselage.
21 July, 20:04
Desert MarlinOkay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!
16 August, 18:29
TreehuggerOh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.
28 August, 05:43
Desert MarlinI'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...
28 August, 17:36
Eric ThorntonLooks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.
bam-models.com/produ..2000-corrected-nose/
30 August, 13:57
Desert MarlinThanks for the heads up! The BAM nose looks fantastic! Sadly, the 2000N nose has a pitot tube and does not have the RDY antenna lines. It seems that much of the 2000N systems are somewhat earlier than the -5 systems. Everything I can find on the 2000N seems to be somewhat austere compared with the 2000-5. The ResKit cockpit is worth every penny!
30 August, 14:59
Mr DLike it 😀👍
Nice when the pilot looks like he's actually doing something and engaged with the craft.
30 August, 15:22
Desert MarlinThanks. It's really sad to remove detail from the ejection seat, but that is the only way to get the pilot in place...
30 August, 22:47
Desert MarlinThe pilot is from REEDOAK. They have several different figures in various poses so the realism can be developed based on the aircraft scenario. This model is being build to represent events just prior to engine start.
31 August, 01:50
Desert MarlinRemaining cockpit items:
1. Glass
2. Decals on seats
3. A little more weathering
4. Fix pilot's France Flag
5. Add WSO's Right shoulder patch
6. Check that I can get the canopy actuators in after everything is assembled...
7. Add HUD glass
1 September, 03:07
Desert MarlinThe glass and HUD went in great! I had to lightly sand the edge of the glass to get it to fit snugly into the ResKit frame between the front and back seats. I used 1000 grit and lightly buffed all the way around the edge. Fits perfectly!
3 September, 16:01
Bernhard Schrockadicionou um novo álbum de fotos.
2 imagens
Piasecki HUP-1
1:48
I recommend to use wire for installing of the stuff on the bottom.So you can align everything better and it becomes more...
Projeto: Piasecki HUP-1 Retreiver
4 2 September, 18:55
Duster_dadicionou um novo álbum de fotos.
19 imagens
Super Etendard (Academy\Modelist)
1:72
The brave Argentine "Etendard" number "02" is finished.
Projeto: Super Etendard (Academy\Modelist)
29 17 August, 09:21
Cristian AExcellent project, watching. The Argentine Étendard aircraft were effective in causing significant damage during the Falklands/Malvinas conflict.
29 August, 21:11
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pt
35
35
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo