Notícias

gorby
I think you win this weeks prize for most heavy duty modelling tool. 😄
Looks a very interesting conversion.

Lenny Li
I think that kind of set up can tool a real bogie!!

Neuling
Watching .....................

Jakko ‌
> I think you win this weeks prize for most heavy duty modelling tool. 😄

Probably, yeah 🙂 It's a metalworking lathe, so a bit overkill for just turning down the seam on those wheels, but I didn't feel like aching fingers from scraping them down with a knife — I get those even when I hold them in a modelling vice, never mind just between my fingers.

> that kind of set up can tool a real bogie!!

Having seen a disassembled Sherman bogie up close, I must say I think this one is a size too small for that 😉

Ben M
👀 fascinating vehicle.

Mr D
Looking good, weld's coming on nice 👍

Ben M
How did you hold the wheels in the lathe?

Jakko ‌
@Mr D: that's not the welds yet, it's just the filler needed to plug the gaps 🙁 I'm still debating how to add all the weld seams.

@Ben M: An M2 screw, about 2 cm long, through the hole in the wheel, with a nut to tighten it. It needs to be fairly tight else chances are the wheel will stop as soon as the chisel hits it. On Asuka two-piece wheels, you need to do this before assembling the parts, because the hole on the piece to be glued in is smaller than on the part that has the tyre moulded on it.

Ben M
Thank you, I can envision the setup. I have a small lathe and arthritis in my hands, this technique could help me a lot. Thanks!

Mr D
Regarding weld's l have seen super glue used through a fine tip, you need steady hand n move in pattern to create weld.
Sorry l was looking at the resin 🤔🤣.
Good stuff be keeping eye
On progress 👍👍

Jakko ‌
@Ben M: What also works is a modeller's vice. Clamp the wheel in that, scrape down the seam with a straight knife over a third or so of the wheel, then unclamp and turn it, and repeat. If I scrape more than about two or three wheels by hand, my fingers ache enough that I have to stop, so the vice helps a lot. But you also get a lot of plastic scrapings all over your modelling area, so this time, I figured I'd put those in someone else's hobby room instead for a change 😉

@Mr D: Hahaha! The ones on the resin were put there by Resicast 🙂 But I'll now have to make ones that look similar, or at least not out of place next to them. I'm thinking a thin string of two-part epoxy, textured with a sharp tool.

gorby
I've just seen an Uncle Nightshift vid on adding weld seams:
Youtube Video

Jakko ‌
Thanks for that.

Mr D
Good video 👍, the finish on the flat plate work looks authentic, l think it's had better rough cast look from the brush stippling before he added the putty coat.
Good idea on the weld , epoxy putty best as regular epoxy levels out again.

Jakko ‌
I've begun to add the weld seams now — see photo 23 🙂 Basically, Magic Sculp two-part epoxy putty that I mixed up a very small amount of, then took even smaller amounts from that and rolled it as thin as I could in my hand before pressing it into the join between the parts. Getting it to stick there is tricky, especially once I began texturing it with the tip of a knife — it wants to adhere to skin and steel much better than to plastic, unfortunately 🙁 But with a bit of perseverance it does eventually stick.

Pietro De Angelis
Fantastic work, congrats!

David Taylor
really coming along.

Jakko ‌
Thanks 🙂

Robert Podkoński
I see some heavy duty equipment here and a lot of elbow grease... Good job so far, Jakko! Keep it up!

Jakko ‌
Thanks, though this is fairly straightforward. The most difficult part was finding a good way to curve the splash plates, really.

Pepe
Looking

gorby
You're doing some excellent work on this.

Jakko ‌
Thanks 🙂

Guy Rump
Looking great, following. 👍

Jakko ‌
Cool, nice to have you along 🙂

Mr D
Taking shape now, the green welding joints are looking a better medium.
Interesting to see an adaptation taking place of the original.
Thanks for your posts, good to see steps
👍👍👍

Jakko ‌
Thanks. TBH, I don't really care to look at photos of finished models — I much prefer seeing how they got to be that way, after which the finished pics make sense 🙂 So I post in-progress photos instead of only what it looks like at the end.

Ben M
Looks great, what an interesting subject. I enjoy your in progress photos.

My favorite bit is the martini glass holder up there on the bridge.

Mr D
Hi Jakko👋
Very nice... great job, thanks for the uploads....be interesting to watch progress.
Like it 😁👍👍

Robert Podkoński
Great job, Jakko! You're a master!

Jakko ‌
Thanks, guys 🙂

> I enjoy your in progress photos.

Speaking for myself, I much prefer looking at how a model was built, than how it looks when it's finished 🙂

> My favorite bit is the martini glass holder up there on the bridge.

I take it you mean the No. 19 set 'B' aerial …

David Taylor
Brill.

Jakko ‌
Thanks 🙂

Guy Rump
Great job! 👍

Jakko ‌
Thank you too 🙂

Ben M
Wow, that took a lot of work. Great result, and such an interesting vehicle. I wonder how many of these conversion kits actually get built!

Mr D
Brilliant 👌 Well done a nice custom model 👍👍
All the work paid off now 👍👍

Jakko ‌
Thanks 🙂 It did take a good while, but I'm pretty happy with how it came out. And I agree with Ben, you have to wonder how many people actually build extensive resin conversion kits these days … they're definitely not for the modeller who just wants to put the parts together.

FWIW, I also have Resicast's Sherman V DD and Terrapin (both complete kits) in my stash, which will probably be even more work 🙂

Ben M
I've looked at an m33 conversion for an m3 along with a resin gun to go behind it but honestly builds like this convince me to save my money; I'm not likely to ever build it and it'd just sit in my stash. I like to spend money on things I'll actually build.

I can just vicariously enjoy builds like this! I also really enjoyed your CDL build, all the corrections you did to it were really amazing. I like how deeply you research these things.

Jakko ‌
Yes, an M33 would be a pretty intensive build, I would imagine 🙂 TBH, Resicast is probably one of the better "traditional" conversion-kit brands you could go for, but if you can't actually see yourself starting it at all then I agree it's just better to leave it. The main reason I had the BARV kit (and the Terrapin, DD, and some others) is because Resicast was going to close last year, and I don't see any plastic kits of any of these coming out in my lifetime …

As for research: I just want to build a model that's fairly accurate, and when the manufacturer gets it clearly wrong, I try and correct the kit 🙂 That's basically what lead to the detailling added to this model, but also the CDL modifications, adding a FULL set of deep-wading gear to a Churchill, etc. I couldn't have done any of these without being able to ask other people online about things I couldn't discover or work out on my own, though.

gorby
Fantastic result!

Jakko ‌
Thank you 🙂

S M
Nice clea building! Could you tell what is the purpose of that aluminium foil?

Maciej Bellos
Thank you for all the likes gentlemen!

S B, the aluminum foil was used to protect the underlying plastic from the sprue goo I used so as the sniper pylon fits better to the fuselage. All Sniper pylons I have are either for the Eagle or the Viper so one had to be modified to fit.

I will sort the photos and add some comments too.

Mr D
Nice 👍👍

capt. R
Thank You!

gorby
Nice dio.

capt. R
Thank You!

David Taylor
Brill.

capt. R
Thank You David!

Landlubber Mike
Nicely done! Love the B&W pics.

Thomas O'Eh
nice build and really cool arrangement!

capt. R
Thank You my Friends!

Mr D
Labrador 🐕 dog..... Essential part of the ground crew .
😁👍

capt. R
😄

Bozzer
I gotta admit, I'd love a copy of those decals. I have a trailer, they'd look really cool on 🙂

Goldman
Bozzer, you can try and contact Italeri via their site and ask them if you can buy a sheet. This is an old model so the chances are slim but worth a try

Robert Podkoński
Taking a first-row seat, of course!

gorby
Welcome to the (occasionally fictional) Show Robert. 🙂

Robert Podkoński
se non è vero, è molto ben trovato 😉

Neil
Make me an early attende along with Robert also mate! 👍 🙂

gorby
Muchas grassy arse Robert (see! I speak foreign perfectly. 🙂 )
Welcome Neil!

Robert Podkoński
LM(grassy)AO! 😄 😄 😄

Landlubber Mike
Great details gorby! Nicely done!

David Taylor
You like most of us waste our lives fiddling away on our own little projects only you do it better than most.I try and resist building OOB to make it more challenging and interesting,sometimes OOB.LOL

Bohrmann
👀 aking a seat

Spanjaard
not to be missed, no doubt 🙂

Rui S
What a beautiful scratch you're doing in such a small kit. This is Unbelievable 😮 at least for a person with tired eyes like me. Do you use a microscope? 😄

gorby
Rui, these days I can barely find my work bench without my optivisor. 😄 😄
David, I do it because I like the challenge as well...and I can't write symphonies. Scratch-building in 1/72 also gives me a chance to practice swearing. I'm getting quite good at it now. 😳

Thanks all for tagging along. 🙂

Pepe
😳😳😳

Kesa Tiho
Glad to see your working on another project. Intrested to see how this will come along, or what it even is.. anyways following with interest 👍

gorby
Thanks Kesa, welcome to the show. 🙂

Łukasz Gliński
Good to see you back with another lorry contraption 👍

gorby
Thanks Lukasz. 🙂
The original intention was to do a quick out of the box build...then I saw what was missing and I've sort of got carried away. 🙂

Mr D
Nice model, l remember seeing a video on simulator truck...used to deliver coal.
Nice 👍👍

gorby
Thanks Mr D. 🙂