Notícias
Martin Oostrom
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
50 imagens
WIP Köln truckNovo: 30 July, 17:01 1:24
This took over two hours. The indents were larger than the decals liked.
Projeto: DAF 95 XF & Trailer "Köln Truck"
13 16 June, 18:26
Martin Oostrom
I spent a couple of hours cleaning up some parts that I cut of the frame
I spent a couple of hours cleaning up some parts that I cut of the frame
22 June, 18:33
Bozzer
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
These curbside chassis, really upset me. Just like the Volvo VN. If the manufacturer, went to the trouble, of making an engine, and separate frame parts, with other kits, then why would they cheap out, on kits like these? I love what you're doing with this though. Keep the pictures coming, buddy 👍
22 June, 19:35
Martin Oostrom
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
I didn't put up pictures of all the cutting and sanding. A summary:
All parts are cut, sanded and glued where possible. Only a few drops of filler were needed.
The cab consists of 10 parts that need to be positioned just right. **** job, but I think I managed.
Next up: Primer.
18 July, 09:20
Martin Oostrom
And primer is on after a monster session. 200ml primer + 50ml SLT = just enough.
Primer is zero paints grey. But a dirty grey.
And primer is on after a monster session. 200ml primer + 50ml SLT = just enough.
Primer is zero paints grey. But a dirty grey.
18 July, 16:16
Martin Oostrom
Tamiya Bright Red for the chassis and Zero stone grey as main colour for the interior
Tamiya Bright Red for the chassis and Zero stone grey as main colour for the interior
19 July, 13:51
Martin Oostrom
The Zero stone grey was a bit depressing, so I mixed a batch 50/50 with white to lighten things up a bit.
Tamiya aluminium was airbrushed, and Tamiya black as well.
Done with airbrushing for now. Letting the paint cure before decalling.
The Zero stone grey was a bit depressing, so I mixed a batch 50/50 with white to lighten things up a bit.
Tamiya aluminium was airbrushed, and Tamiya black as well.
Done with airbrushing for now. Letting the paint cure before decalling.
20 July, 14:19
Bozzer
That's pretty good moulding. I thought they were PE mate.
I'll get some pictures up myself, tomorrow, of what I've been up to?
It's been a rollercoaster, that's for sure!
That's pretty good moulding. I thought they were PE mate.
I'll get some pictures up myself, tomorrow, of what I've been up to?
It's been a rollercoaster, that's for sure!
20 July, 21:50
Goldman
Great progress with the DAF
I do hope Revell will re-release all of its classic and colorful kits like this one. It will looks amazing with all the decals.
Great progress with the DAF
I do hope Revell will re-release all of its classic and colorful kits like this one. It will looks amazing with all the decals.
30 July, 07:16
Martin Oostrom
Started with the decals. They're a bit older and fragile. Should have read the instructions better. Would have made life a bit easier now.
I don't know what Revell were thinking, but some of the curves are too steep for these decals. It takes a lot of softener, a hairdryer and a boatload of patience to get them right. Even then they tore in places. And I've only done 5 pieces.
Started with the decals. They're a bit older and fragile. Should have read the instructions better. Would have made life a bit easier now.
I don't know what Revell were thinking, but some of the curves are too steep for these decals. It takes a lot of softener, a hairdryer and a boatload of patience to get them right. Even then they tore in places. And I've only done 5 pieces.
30 July, 17:09
Bozzer
Sorry to hear about your bad experience mate.
However, it's definitely made a difference, and I know, that it looks bloody fantastic!
This is why I'm not a big fan of decals. It's the worst part of any build, for me. Hence why I push myself, with my airbrushing? But, I have to be in the correct mood, in the correct conditions.
The decals on my Turnpiker, were terrible. The amount of decals softener that I used, started to affect the clear coat. Next time, I'm going to airbrush everything, and then put them both together, so you guys can give me your honest verdict.
But to try and airbrush those beautiful decals, that you have there, would take me years!
Do you think, you would have been better trying to copy them on your own decal paper, and trying it that way?
Sorry to hear about your bad experience mate.
However, it's definitely made a difference, and I know, that it looks bloody fantastic!
This is why I'm not a big fan of decals. It's the worst part of any build, for me. Hence why I push myself, with my airbrushing? But, I have to be in the correct mood, in the correct conditions.
The decals on my Turnpiker, were terrible. The amount of decals softener that I used, started to affect the clear coat. Next time, I'm going to airbrush everything, and then put them both together, so you guys can give me your honest verdict.
But to try and airbrush those beautiful decals, that you have there, would take me years!
Do you think, you would have been better trying to copy them on your own decal paper, and trying it that way?
30 July, 17:51
Joe Kim
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
27 imagens
Grumman F8F-1 Bearcat (Blue Angels Aircraft)Novo: 29 July, 19:50 1:72
Decals applied and model completed. The DRAW decals behaved very nicely. I followed the included instructions, which mad...
16 21 July, 00:31
JUAN RAMIREZ
possui este item
possui este item
Mobile Suit RX-93-v2 High Mobility Backpack for MG RX-93 Hi Nu Gundam Ver.Ka
Rage Nucleon 1:100
BC-T02 2020 Produto novo 30 July, 17:47
Eric Blake
possui este item
possui este item
HGUC UC Engage
RX-78GPZ01 Engage Gundam Premium Bandai Limited Bandai Spirits 1:144
5066574 2024 Produto novo 30 July, 17:44
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pt
35
35
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo