Notícias
David H
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
8 imagens
This is not all it's cracked up to be …Novo: 16 October, 19:23 1:48
Cracking across the tail decals. The gray smear is where I’d already started removing paint then though I really should ...
Projeto: Phantom FG1 “Colonial Navy “
6 15 October, 15:59
David H
This won't be in FAA colours as I don't have any more FAA decals for this era of phantom so it's going to have to RAF.
This won't be in FAA colours as I don't have any more FAA decals for this era of phantom so it's going to have to RAF.
15 October, 18:42
Mr D
Hi Dave pain in the but when something like this happens to paint..?
It's all a learning curve.
I snapped a canopy in two recently.
Don't let it put you off, Velejo paints are very reliable and don't let you down.
I purchase a basic colours set when l first set out and never looked back.
Good luck with sorting it out..👍👍
Hi Dave pain in the but when something like this happens to paint..?
It's all a learning curve.
I snapped a canopy in two recently.
Don't let it put you off, Velejo paints are very reliable and don't let you down.
I purchase a basic colours set when l first set out and never looked back.
Good luck with sorting it out..👍👍
15 October, 19:05
gorby
Shame about the crazing as the model was looking very good. Do you know if it was the paint or the top coat which cracked?
Shame about the crazing as the model was looking very good. Do you know if it was the paint or the top coat which cracked?
15 October, 19:58
David H
Mr D , nothing puts me off, as you say it's all a learning curve. Gorby, I "think" it was too heavy a paint coat,. I've stopped using pure acrylics. I now use Tamiya acrylics thinned 50/50 or more with cellulose thinners (and a mask) gives a super smooth finish and no primer needed to key
Mr D , nothing puts me off, as you say it's all a learning curve. Gorby, I "think" it was too heavy a paint coat,. I've stopped using pure acrylics. I now use Tamiya acrylics thinned 50/50 or more with cellulose thinners (and a mask) gives a super smooth finish and no primer needed to key
16 October, 10:48
gorby
I've not heard of Tamiya acrylics being thinned with cellulose before. Normally I use the Tamiya thinners and find that works very well.
I've not heard of Tamiya acrylics being thinned with cellulose before. Normally I use the Tamiya thinners and find that works very well.
16 October, 11:02
David H
If you thin with cellulose (and leave it for a few hours) it breaks the particles down and gives a ridiculously smooth finish as well as etching into the plastic.
If you thin with cellulose (and leave it for a few hours) it breaks the particles down and gives a ridiculously smooth finish as well as etching into the plastic.
16 October, 12:40
Mr D
Hi Dave 👋
It's bit to Harsh for modeling Cellulose.
Isopropanol alcohol or Tamiya thinner is better and safer.
Cracking can happen if X2 paint coats are drying at quite different times.
Hi Dave 👋
It's bit to Harsh for modeling Cellulose.
Isopropanol alcohol or Tamiya thinner is better and safer.
Cracking can happen if X2 paint coats are drying at quite different times.
16 October, 13:04
David H
Whatever works for you…with pure acrylics I've had issues with " lifting" ymmv. Just don't try it with anything other than Tamiya. Tamiya is NOT a proper acrylic . "Proper" ie water based acrylics just turn to jelly 😉
BTW the FAA phantom was done with Tamiya acrylics thinned with Tamiya thinners.
Whatever works for you…with pure acrylics I've had issues with " lifting" ymmv. Just don't try it with anything other than Tamiya. Tamiya is NOT a proper acrylic . "Proper" ie water based acrylics just turn to jelly 😉
BTW the FAA phantom was done with Tamiya acrylics thinned with Tamiya thinners.
16 October, 14:48
Patrick Hagelstein
Wow! That's quite the save. 👍🏼 Really nice repaint. 👍🏼 I like using lacquers like Mr. Color, MRP or SMS and occasionally thin Tamiya 'acrylics' with lacquer thinner as well. They spray fabulously and if I need to touch up anything I just come in with brushes and use water or acrylic thinner as to have the same color.
Wow! That's quite the save. 👍🏼 Really nice repaint. 👍🏼 I like using lacquers like Mr. Color, MRP or SMS and occasionally thin Tamiya 'acrylics' with lacquer thinner as well. They spray fabulously and if I need to touch up anything I just come in with brushes and use water or acrylic thinner as to have the same color.
16 October, 19:32
Mr D
Well done for pulling it back Dave, l like the new scheme..... Great aircraft 😃👍
Well done for pulling it back Dave, l like the new scheme..... Great aircraft 😃👍
16 October, 23:22
Gary Victory
Nice work David. I've done something similar on a Tamiya Spitfire because of the decals. Looking forward to seeing the finished result.
Nice work David. I've done something similar on a Tamiya Spitfire because of the decals. Looking forward to seeing the finished result.
17 October, 06:20
Desert Marlin
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
40 imagens
P-38J (Robin Olds) [COMPLETE]Novo: 16 October, 21:51 1:48
Projeto: P-38J (Robin Olds) [COMPLETE]
8 16 October, 21:30
BetterTimes-Henry
Looks great. I have the kit in my stash, will have to build it soon 👍
Looks great. I have the kit in my stash, will have to build it soon 👍
16 October, 21:50
Desert Marlin
After two hours, the whole cockpit, wings and "fuselage" were together. I got totally sucked in after the first two hours and it really got in the way of other projects! So fun!!!
After two hours, the whole cockpit, wings and "fuselage" were together. I got totally sucked in after the first two hours and it really got in the way of other projects! So fun!!!
16 October, 21:53
Desert Marlin
Biggest issue is the choice of D-Day markings. The white bands are 60 mm on each wing and on the booms. This makes the individual stripes 12 mm. Pretty easy once you see it. I started out with 50 mm white band. That was clearly too short.
Biggest issue is the choice of D-Day markings. The white bands are 60 mm on each wing and on the booms. This makes the individual stripes 12 mm. Pretty easy once you see it. I started out with 50 mm white band. That was clearly too short.
16 October, 21:56
Desert Marlin
Model Master Neutral Gray on the underside and Vallejo 71.043 (US Olive Drab) on top. Lots of Tamiya Panel Line accent black overall.
Model Master Neutral Gray on the underside and Vallejo 71.043 (US Olive Drab) on top. Lots of Tamiya Panel Line accent black overall.
16 October, 21:58
Desert Marlin
I have seen claims that Olds first two kills were in this specific aircraft.
I have seen claims that Olds first two kills were in this specific aircraft.
17 October, 00:27
Gary Victory
Really nice work DM....Lovely build.
Best story around Robin Olds in a P-38 was that he got behind a flight of 109's.....he was ready to open fire when his engines cut - dead. He had forgot to switch tanks to his internals when he jettisoned his external tanks. Instead of resolving his fuel transfer issues he just carried on lining up on the 109 and shot it down while in 'glide mode'. That's calmness under pressure for you.
Really nice work DM....Lovely build.
Best story around Robin Olds in a P-38 was that he got behind a flight of 109's.....he was ready to open fire when his engines cut - dead. He had forgot to switch tanks to his internals when he jettisoned his external tanks. Instead of resolving his fuel transfer issues he just carried on lining up on the 109 and shot it down while in 'glide mode'. That's calmness under pressure for you.
17 October, 06:16
Tweets
possui este item
possui este item
U.S. Main Battle Tank
M1A2 SEP Abrams TUSK I / TUSK II / M1A1 TUSK 3 in 1 Rye Field Model (RFM) 1:35
RM-5004 2016 Produto novo 17 October, 06:15
Shane Hodgetts
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
30 imagens
1/32 Revell Hawker Hurricane Mk.llB1:32
Projeto: Revell Hawker Hurricane Mk.llB
Scratchbuilt
10 16 October, 04:03
Snake Plissken
Finish looks legit; is that a semi-gloss or satin coat? Sometimes model planes have too much of a flat or matte finish.
Finish looks legit; is that a semi-gloss or satin coat? Sometimes model planes have too much of a flat or matte finish.
16 October, 21:47
Shane Hodgetts
Cheers…legit is what we're all looking for…😉👍
I used the Mr.Hobby semi gloss rattle can just before applying the decals…then weathering on top. Was going to hit it with a flat coat but kinda thought it looked "legit" as is…😁👍
Cheers…legit is what we're all looking for…😉👍
I used the Mr.Hobby semi gloss rattle can just before applying the decals…then weathering on top. Was going to hit it with a flat coat but kinda thought it looked "legit" as is…😁👍
17 October, 06:15
Andrea Brenco
adicionou um novo projeto.
adicionou um novo projeto.
7 July, 18:10
Moreno Baruffini
Fa niente! Ho già ammirato le foto finali, ovviamente un capolavoro!
Fa niente! Ho già ammirato le foto finali, ovviamente un capolavoro!
17 October, 06:10
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pt
35
35
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo