Notícias

Alex K
I'm in - of course...

Michael Kohl
I only and sincerely hope that you quadruple checked your references that the original plane didn't have an "Airfix" molded on the cockpit side walls - lest you have to scratch new ones. 😉

Łukasz Gliński
My heart broke when I had to do it 😁

Nicolas
I'm in. Got the Airfix kit and the Pavla detail set in my stash, but I'm thinking about replacing it with the AVI kit. I think your report will be a big help there.

Cuajete
Great! The Bird Dog Society has begun. I have felt a great disturbance in the Force, but I remembered that Łukasz is a great tamer of hard plastics 😉

It looks like those photo-etches are doing a good job 👌

Alex K
So... if the AVI kit is destined for the representation of Major Buang-Ly's plane... I'm also eager to see what the Airfix kit will be...

Łukasz Gliński
You're absolutely right Alex - AVI's going to be Major's BirdDog and Airfix is destined to be boxart DJ-coded one.
I was thinking of Maltese markings for it, but there are none available.
Cuajete, the PE are quite good, but the Airwaves set has quite unclear hand-drawn instructions, which is challenging sometimes.
Nicolas, wish I could fetch the Pavla tail set, I need to try restoring the raised lines after having to remove the injection marks.

Nicolas
I'd wish there would be a conversion kit to a Siai SM 1019. But I think I have to scratchbuild the different cowling, propeller and tailsection.

S M
I'm in!

Łukasz Gliński
Terve! 😛

J35J
Taking a chair

István Szücs
Interesting project, I'm watching!

Robert Podkoński
Watching too.

Łukasz Gliński
Welcome mates 👍

Clement
Nice project, I'll take a chair and follow along 🙂

Cuajete
Very nice interior, Łukasz! 👍

Guy Rump
Looking good Lukasz, following. 👍

Łukasz Gliński
Thanks and good to see you. I progressed a bit with AVI set as Airfix requires some corrections, namely tail and windows

Cuajete
Good progress, Łukasz! 👍

Thomas Kolb
Wow, that cockpit looks beautiful! Are the wings joined to the transparent canopy only? Are you using CA or regular styrene solvent? I find that transparent plastic doesn't create a strong bond using regular styrene cement, but maybe you are more skilled than me.

Łukasz Gliński
Shhh, Thomas, so far it does stay together 😉
Actually the greenhouse is build using CA in some places and Mr Cement SP in others.
I think it depends on the material used by the manufacturer, for example Zvezda lately is known for using polyethylene afaik.

Mirko Römer
Small, but I'm in.

Cuajete
Łukasz, looks like you did a good job with those windows 👍

Cuajete
Łukasz, you are doing a very good job with the Airfix kit. At this rate it will have a better result than the AVI one 😉

Erik De Smet
That kit is older than you, Greg...

Robert Podkoński
Taking a seat!

Alex K
Joining the audience.

Finn
Once again joining (of course)

Greg Baker
This one is likely to be a quick little build. It's basically the companion piece to the Puss Moth, so I felt like I couldn't really build one without the other. Erik is right though, the kit is of an impressive vintage. It is indeed a few years older than I am, and has the flash to prove it. 🙂

Anyway, thanks for joining, there's plenty of seats available, so no shoving. 😉

Nicolas
Looks like fun. joining.

Greg Baker
You say that now... but wait till you see how much putty and sanding is required~

Alex K
Hmmm hmmm hmmm... So, is it a Demon or a Hart? And what about that rear cockpit?

Greg Baker
Well, it's supposed to be a Hawker Hart apparently... but the Hawker Demon is close enough... I mean, it's not like it's a Spitfire. 😉

Alex K
Good enough for me - I'm arguably one of the least rivet-counting persons in here... just asking/checking... 😉

Ben M
👀

Matthew A
And only a masochist with ADHD would consider trying to convert it back to a Hart like the original 1957 tool... 🤪

Greg Baker
What did you call me? 😉

I mean, besides the dip between the two cockpits... are there any other differences? They look quite similar to me...

Alex K
Well, the "dip between the two cockpits" is the main difference I was referring to above... Plus, you'll have to skip the Demon's long exhausts, I guess...

Cuajete
Following!

Łukasz Gliński
Me 2

Lode Schildermans
In for tais New Tintin adventure

Greg Baker
Not exactly sure what picture to take to update my progress… I'm working on bits of everything all at once!

Matthew A
The main difference between a Demon and a Hart is the exhausts, the turret and the starboard machine gun. Will send a PM

Alex K
IF however (regardless of how a real Hart should be) what is shown in the comic ("That's what I call" etc frame) is indeed a starboard mg (please correct me if I'm wrong...) then starting with a Demon kit was perhaps indeed a better idea than starting with a Hart kit.... IF this is the case... then you'll only have to deal with the rear seat/turret thing and the free (ala Fury) exhausts, no?

Greg Baker
Yeah. I think so. Matthew provided some detailed comparison images but after looking at them and at the main page from the album... it seems to be a little bit of both...

Matthew A
The 1930s version
i.imgur.com/CrTThem.jpeg

bughunter
I see "Seven at one stroke" projects on your bench 👍 Please keep them coming!

Matthew A
In Tintin in the Land of the Black Gold it could be a Hawker Hardy
i.imgur.com/57c2RcA.jpeg

Greg Baker
That's the original "leaflet dumping" aeroplane. Nice find!

Greg Baker
Made a bit of progress on this one. 🙂

Greg Baker
A couple of updates. The supports next to the fuselage were so weak that 3/4 of them snapped even before I got them off the sprue. So instead I just used some bent wire. The holes they are meant to slot into were gaping caverns as well, so a fair amount of putty was needed to make it at least slightly better. Now I'm left with a decision to make. The Hawker Demon has two large exhaust tubes that run from the engine down the sides. They're not present in the Tintin album (which most closely resembles a Hawker Heart I believe). So... do I leave the two side holes and the large trenches on either side of the engine cowling, or do I just shrug my shoulders and use the parts that came in the box?

The Blue Rider decals went on easily enough. They're a bit shiny, but I think I can deal with that.

Matthew A
Looking joly good

Greg Baker
Thanks Matthew. I'm quite pleased with how the colouring came out too. A 2:1 ratio of Tamiya Buff (XF-57) and Khaki (XF-49) seems to have done the trick... or at least close enough for me.

Cuajete
Painting color looks so good 👍

LC
this sounds like quite a fun and unique idea

Nathan Dempsey
Thanks LC76. Welcome to the build!

Torsten
LOL, follow ^^

Robert Podkoński
Watching for sure!

Nathan Dempsey
Welcome Torsten & Robert!
I've started the fuselage assembly and clamps were needed.

Dutch
Nathan, I am following along as well. I have friends in eastern Ukraine, so very interested in this one. Kind regards, Dutch

Nathan Dempsey
Welcome Dutch! This build is turning into a slog. Clamps and super-glue "force-holds" galore. Luckily it is a tiny plane so I'm nearly done already, just completing all the seam sanding.

Nathan Dempsey
Working on the cowl. I had to use 2-part epoxy clay to fill a large gap on the bottom of the cowl that was created by making the cowl fit straight & level.

Nathan Dempsey
Working on masking the camo pattern today.

Dutch
Looking good. Keep up the progress. The splinter pattern will be stupendous when done.

Nathan Dempsey
Thanks Dutch! Man I just realized looking at pictures that the wing camo is a mirror image for the other wing. It won't be perfect… 😁

Ben M
Ah, amodel 🙂

Dutch
Ben, I feel you!

Nathan Dempsey
Welcome to the show Ben! I've applied the first color today. Now off to cut masks for the next color. I've been spoiled by those pre-cut masks…

Dutch
Nathan, quick question. Why not just spray the first color overall, then mask only the subsequent colors? Saves at least one step, I should think. Carry on. I am enjoying the show.

Nathan Dempsey
In this case I just got a little too happy masking. I even decided against my usual preshade since this plane's paint looks really new in all the pictures.

Dutch
Yeah, I can understand the excitement factor!

Dutch
Nathan, are you going to put kill markings on it?
google.com/url?sa=t&..e2eYFcXbT_ewibuKmesM

Nathan Dempsey
Well my printer is dead, but my dad has a similar one so I'm going to try… Wish me luck.

Nathan Dempsey
The second color has been applied. Slow going here as my workbench time has been lacking.

Dutch
Okay! Coming along nicely!

Nathan Dempsey
Thanks Dutch! Today I masked off the areas for the gloss black. The tan colored areas are quite small, but they're everywhere. Tamiya tape stock is going up!!

Nathan Dempsey
Well my gloss black was solidified, so flat black will have to do. Hopefully it will all even out when the clear is applied

Jennifer Franklin
Impressive detail work!

Villiers de Vos
Very nice work so far on the camouflage scheme.

Nathan Dempsey
Thanks Jennifer and Villiers!

Work continues on masking these tiny sections.

Nathan Dempsey
Well that was a whole bunch of masking for some very tiny pixels… I also added a coat of Future to help with the panel lining effort to come.

Nathan Dempsey
Today has seen the underside color selected and applied (Tamiya X-14 Sky Blue) along with masking/painting the cowl colors using Steel & Red.

Ben M
What are you using to do the panel lines?

Nathan Dempsey
I'm using both AK & Mig panel wash. For the bottom I used Grey-Blue and for the top I haven't decided whether I'll use a dark brown or black wash. Of course for the black areas I'll use the Stone Grey wash which I think is Mig.

LC
It's looking very good, keep it up!

Guy Rump
Looking good, following. 👍

Nathan Dempsey
Thanks LC & Guy!
More masking for the Ukrainian flag on the tail today.

Robert Podkoński
Looks great already, Nathan. Keep it up!

Nathan Dempsey
Thanks Robert!
Chrome Yellow has been applied for the first half of the Ukrainian flag on the tail.

Nathan Dempsey
The Ukrainian flag on the tail has been completed and the landing gear legs have been painted and attached.

Dutch
Slow and steady wins the race! Nice work, thus far.

Nathan Dempsey
Thanks Dutch! Today I completed painting the canopy framing and the wheels. Also my clear gloss arrived in the mail today, so I'll be able to apply that to the entire aircraft. After that I only need to paint the anti-glare panel on the upper cowl. Nearing the finish line.

Nathan Dempsey
Calling this one complete. Thanks for the interest and likes!

Dutch
Ooh-la-la! Well done Nathan. Definitely a special addition to the display case.

Villiers de Vos
Very nice work on your little hunter.

Oleg Smilyk
It`s great!

bughunter
Nice 👍

Robert Podkoński
Great job! I love the camo and propeller most.

Nathan Dempsey
Thank you very much for your kind comments mates!

Jennifer Franklin
That camo is sharp. Very nice job!

Guy Rump
Great result! 👍

Nathan Dempsey
Thanks Jennifer & Guy! 🙂

James C
Nicely done Nathan 👍