Notícias

Stef_nav
Je suis absolument impressionné. Bravo. L'intérieur est magnifique de détails. Je suis en train de le monter. J'ai été piégé par le lest à mettre dans le nez et les antennes qui ne sont pas très correctes. Je ne sais pas comment vous avez réalisé le treuil.
Un grand bravo en tout cas !

Villiers de Vos
Very nice work.

NICOLAS GRANDMONTAGNE
Merci pour vos commentaires. Thanks for the comments!
Le treuil est réalisé à partir de plusieurs épaisseurs de carte plastiques collée ensembles et mise en forme petit-à-petit à la lime.

Stef_nav
Je vais donc suivre ces bons conseils, mais je ne pense pas être à la hauteur. Je vais faire de mon mieux.

Michael Kohl
Very nice chopper.

Michael Kohl
Dream kit of my youth. Unaffordable then. Still looking for one with a acceptable price tag on it.

Mr D
Nice choice of kit, like the way your clock's/ instruments have turned out.
Was each clock individual??
Good stuff, my next kit is a Tamiya, was good quality.
Thanks for uploading 👍👍

John
Thanks Mr D. You can't go wrong with a Tamiya, at least in terms of fit. Sometimes their details get simplified and supposedly a few kits have accuracy issues, but for assembly they are great. Had to do this one after the A-20G since it was so painfully fussy to fit together. This is a nice change!

I thought about punching out each instrument individually but it's so small it would have driven me mad. Fortunately, the decal is sized perfectly to the panel so if you align it carefully, it turns out fine.

This kit doesn't specifically say it, but you can do both open and closed engine panel. Since the engine fits with pins and poly caps, you can change them out, which I intend to do. It's a nice touch and the kit is fairly cheap. Pick one up if you haven't already.

Mark Sherwood
I agree,after a frustrating build. You can go to a Tamiya kit and get back to what the hobby is about. . . Enjoyment, satisfaction, reasonable accuracy and a decent finish. Good interior John, looks like the 162 is on track as I would expect from your good self. 🤘🥸🤟🥸👍

Mr D
Brilliant thanks for the Advice John..😃👍👍. Appreciate it.
Good luck with rest of build ...nice subject 👌

Doubtingmango
Fantastic work on the instruments! Nothing like a nice Tamiya kit to keep the blood pressure down to acceptable levels

bughunter
Yep, nice work 👍

Sebastian Meyner
👍 Following 🙂

Mr D
Like the engine n wiring work ... coming along nicely 👌👍

Christian Bruer
Platz / Eduard A-4 Skyhawk in an in flight display. The Scooter looks quite nice on the ground but really cool in flight. I am a bit curious how it will come out in the end.

Happy Modelling, Christian

Spanjaard
I am sure it will come out fantastic 🙂, base looks great already

Christian Bruer
Thx Spanjaard 🙂 It looks quite nice when in place, but I have one point with the acrylic rod I will use and the hole in the background to hold it. I thought about to place some cotton around it, but I am not sure. But let's see, time and test will tell.

Christian Bruer
Panel line wash and colour modulation.
Happy Modelling
Christian

Bruce Huxtable
Really neat, and subtle too. Can't wait to see the finished display 🙂

Christian Bruer
Thank you Bruce 🙂

Michael Kohl
Really like it. I'd appreciate a word or two about the base.

Christian Bruer
Thank you Michael 🙂
What do you want to know about the base?

Michael Kohl
Ah. I thought the front had a special shape and wanted to know where you aquired it. But now I see that I was fooled by the white block in front of it.

Robert Podkoński
How did I miss that? Watching with pleasure!

David H
Haha how many crusaders and voodoos can a man have ??? 🤣

Answer = Not enough

Looks like my phantom stash… 38 and counting 😵

Rando
Hahah yes I certainly have some specific interests! Not pictured are five conversion kits I've collected between the two planes so far, and a box of Voodoo aftermarket.

And 38, wow. I imagine you've built quite a few more, what's your pick for who makes the best one? I heard the recent Tamiya release was among the best models ever kitted.

David H
Sorry for the late answer. TBH , they all have their ups and downs. The Hase is getting old and lacks detail but still renders a good likeness. Best for me is the Zoukei mura kit. It's just personal as the Tamiya kit is fantastic as well. I actually quite like the old italeri kit as a base for a decent model. It's cheaper than the Hase and the savings can't be spent on useful resin parts. Academy has taken the place of Hase as the go to for a decent well priced kit.

Jennifer Franklin
Following; there are a lot of F8-E Crusaders!!

Rando
Oh yeah hahah, I'd like to know if other modelers have a singular obsession with a specific subject like I do with the Crusader. Maybe it was because it had its own episode on Dogfights and featured a lot on Area 88. It's just a unique and aesthetically pleasing fighter jet. The Sword RF-8 release got me more into building some 1/72 scale so I'm getting a couple Academy kits and decals too.

Casey Beckett
Well someone has done a fine job raising kids. Nice haul!

Rando
Thanks Casey 😄 growing my Phantom stash

Rando
I've noticed something frustrating about this Aeromaster decal sheet. There's a section of red missing from the "T" shape on the F-8H option. It looks like only the black outlines have been provided and so the only option appears to fill it in somehow, be it paint or spare decal? Either way, I feel like it would be really challenging to get the color to match perfectly. Has anyone built this or done something similar? Is there something I'm missing here? It's a shame because this is a really cool option I'd like to build but I'd only do it if I felt like I could match the decal color perfectly.

Ian Doody
Made a start on the 1/32 Trumpeter F4F-4 Wildcat, I'm having my wings permanently folded, this is just all dry fitted so far, I'll add more detail later when the wing is added. No point cleaning up the inside part of the wing of ejection holes, as this will be hidden behind the wing. Think it looks ok so far.

Ian Doody
So today I've semi painted up the other sides wing root fold system. And started dry fitting the engine. Need to pick a scheme from the Techmod decals at some point, thinking of 1 or 4 so far.

Ian Doody
Ooh landing gear and engine support structure. Just needs a few touchups, thats it done for now, have to glue it all up straight away, doing it later would be a pain in the ass. Looks ok, I'm no expert on these things. Just for fun build in-between other stuff.

Ian Doody
I think, as an engine that'll do really, don't need anymore detail on it. Couldn't see it if it was there anyway. I'll paint the rear bank of cylinders, but that's probably it.

Ian Doody
That's all for today, making the most of what you get in the kit, only added bits of wire, no sense going mad with detailing parts you wont see. Prop tomorrow, finish the rear bank of Cylinders, and make a start on the cockpit. Looking nice so far, looks like an engine to me.

Ian Doody
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point spending lots of money on a resin engine. Just some wire and a bit of paint.

Rui S
Looking special 👍 I'm in 😎

Guy Rump
Looking good and detailed build notes, following. 👍

Ian Doody
That's it for today, don't think I can handle seatbelts as well. So far so good, looks like a cockpit, when it's in the plane, you won't see anything. I tarted up the kit seat, as I couldn't stomach making the PE eduard one.

Rui S
hum, hum 😎 looking good 👍

Ian Doody
So I can do seat belts, but I hate doing seatbelts, not brilliant, but for all you'll see, it'll do me. My fear of PE is lessening, I'm getting a bit more confident each time, next the top straps. Then I can tackle the joining of the fuselage halves together, which is tricky on the 1/32 Trumpeter F4F-4 Wildcat, as a few parts need extra sanding to fit. Looks ok to me so far.

Ian Doody
Seatbelts done, that'll do. With my eyesight it'll look amazing from far away lol 😆 but for me, as a learning exercise, looks fine. I would wholeheartedly recommend HGW Laser seatbelts, they make it a lot easier.

Ian Doody
Tomorrow I'll make a start on the Empennage and getting everything to fit. I'm not using any of the PE hinges either. Then wings.

J35J
Great work and progress so far!👍🏻

Ian Doody
Back to the 1/32 Wildcat. Start of paint.

Ian Doody
Hmm, this is going to be interesting. As usual no idea what I'm doing, just riding by the seat of my pants. I'll try and block in all the colours then look into weathering. Who knows how this'll look.

Ian Doody
Well, it's blueish grey now, or greyish blue. Because I'm a cantankerous stubborn fool, I paint everything with brushes, Main colours blocked in, teeny tiny fiddly bits added, now I've just got to build some more layers up, start lightening and shading areas. It won't be brilliant, but it may look good on my shelf. Which is the main thing, due to lack of space, pretty much all the aircraft I'm going to build will have folded wings.

Mr D
Very nice, the wing internal colour looks spot on👌, l tried mixing this colour but struggled to get right tone.
Nice looking kit, what do you make of the Trumpeter kits??
Good luck with the next steps 👍👍

Ian Doody
Hello Mr D, so far I've only looked at early Trumpeter kits, panel lines are a bit too light for me, the early ones have gimmicks like working wing folds, and the PE hinges, but they build up quite well, and to me look like what it says on the box. I've got a lot more Trumpeter and Hobby Boss kits to build up in the future.

Ian Doody
As is my usual way, I have absolutely no idea what I'm doing, just going with the flow, it seems to want to be like this.
A very, very long way to go still, it'll be a lot lighter than it is now, and not so stark. I know, I shouldn't weather it until later, but i can't help it, it's a curse.

Mr D
It's a cracking looking model 👍👍
The weathering is looking good nice balance.
The internal metal parts ....the yellow/green..Did you mix or have the colour ready in a bottle

Ian Doody
Mr D, the green is just mixed up as and when I need it, it's just a caramel mixed with green paint.

John
Looking good, Ian!

Mr D
Thanks Ian, good to know...l tried mixing from yellow n green but didnt look right.
Cheers 👍👍

DerMattes
Following.

Ekki
Watching too.

CaptGPF
Same! Want to see how this turns out!

Nicolas
Following too.

Patrick Hagelstein
Interesting! 👍

Łukasz Gliński
Joining the party 👍

Mid Franconian
➡️🍿🛋️‼️

Thomas Kolb
Very nice cockpit! How do you find the 3D decals, are they worth the extra cost?

Falk Röllig
Welcome mates. In 1:72 scale 3D decals are a way better than pe and my hands are to shaky to paint. I use them for most of the models with open canopies. For inflight models and with pilots i think it's not necessary. With Kelik and Eduard 3D i'm not always happy, but Quinta for me it's the first choice.

Gergő Takács
Nice! I take a seat. I have a same project right now.

Finn
Following

Martin
Good Start!

Skyhiker
Falk maybe it is the lighting but that blue on the fuselage spine looks too dark for the color of a Bavarian flag. You might want to add a bit of white to the mix.

Falk Röllig
It's not as dark as it seems on the pic but you're right. It will need a lighter shade at the end.

Michael Kohl
Coming along nicely.

Robert Podkoński
I will follow this built with pleasure and interest 🙂

Milos C
Hi mate,
do you still offer this model M113 FItter?
Can you sand me some actual photos of your model - how it looks like - sprue, box, decals... It is old model.
And post costs to Czech rep. and/or to some box to Zittau (GER).
Thank you
milos.ciniburk@gmail.com

Jan Janssen
Unusual subject wonder how it builds up, #following

Mr D
Thanks Jan 👍will update through build.
It's from the 1990's

Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??

David R. Meizoso
Beautiful subject, I'm also in!

Guy Rump
Following. 👍

Mr D
Thanks Grumpy Guy 👍👍 bit of a different one..

Skyhiker
Very nice

Ben M
👀

Mr D
Ben👋😀👍

Neil
Really nice work Mr D 💯 Following 👍

Mr D
Great Neil, 👋😀.... Thanks

J35J
Great progress! Following👍🏻

Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.

Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍

Michael Kohl
Following

Mr D
Thanks Michael 👋😀👍
Good to have you along ✈️

Spanjaard
i think you copied and pasted the name from your previous post, instead of the link.... here it is since i see both posts in the newsfeed Full scale Sopwith factory decal (Wingnut Wings 9110007, 1:1) it will be easier for our webmaster

Mike711
Ahh, thanks, spot the newbie! 😂😂