Notícias

Martin Oostrom
No requests, but you might find some planes here The Hermeskeil Files | Project by Mahoo76 (1:1)

Skyhiker
Oh yes. Thank you Martin. The Junior family collection in Hermeskeil would be a great destination.

Michael Kohl
Do-24 in Oberschleißheim close to Munich (department of the Deutsche Museum).

Skyhiker
Gee, Michael, that's one Big ask! Do-24 would be great to draw but it will take me some time. That's one complicated machine. What scale would you need?

Skyhiker
If I were to do the Do-24 I think I would probably start by going to the Technik Museum Speyer. The fuselage they have is easier to access. It being in such rough condition actually makes it easier to get accurate measurements. But afterwards I would have to contact the Deutsche Museum to get access to their plane in order to complete the drawings.

Michael Kohl
Hi Shyhiker. I am not asking. I am just wishing and dreaming. 🙂
1:72 would be wonderful for me. I've completed the interior of my spanish Do-24 and riveting (negative and positive) will be the second next task after building the spanish cupolas.

Alec K
Do 24 would indeed be great 👍

Villiers de Vos
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.

Alex
Thank you, Mate! This photo etch is selfmade from 0.2mm brass plate ))) I need to buy the photo etch bender, to make it better. ))

Doubtingmango
Nice practice!

Alex
Thanks! )

Joe
Looks great! How are you making the weld beads?

Alex
Thanks, Mate!
I try to make weld beads like on my favorite YT cannel )))
1) I make a groove with scraiber, if it necessary on the plane surfaces.
2) Next, i prepare 2 component putty, and make a thin "laces" out of it.
3) After that, I carefully fill the grooves and angles with putty "laces" and apply welding texture with special tool (toothpick with tip warped with brass sheet, witch forms small speared C shape).
That is all.

Joe
The outcome looks very realistic, thanks for the explanation!

Roland Sachsenhofer
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...

Robert Podkoński
Taking a seat here, too 🙂

Roland Sachsenhofer
It's a pleasure!

Transall NG
Nice aircraft !
One was used in the last phase of the New Guinea gold rush in the 30's...
Good luck !
@+

Łukasz Gliński
I have to follow this as I still haven't started mine 👍

Ekki
I am in too.

art81
Is not as good as I thought but there is no better available 🙂

Łukasz Gliński
A lot better than Mistercrap anyway 😁

Sergej I
Following 👍

Maciej Bellos
In!!!

Dave Flitton
Watching!

Robert Podkoński
Watching for sure.

William Joel
First thought, WOW. Cockpit details not bad is an understatement. Nice job.

Guy Rump
Looking great, following. 👍

Skyhiker
Oh cool plane. The first domestically developed jet to be produced by Poland.

Nicolas
Graping a seat.

Łukasz Gliński
Nice progress - any problems with the nosejob?

Christian Bruer
Recently I stepped into the 3d printed product range from Fat Frog Scale Models. This company from Hongkong offers highly detailed 3d printed tracks for all common German WWII tanks in scale 1/72. In the case of these Pz. III tracks the driving wheel is printedt together with the tracks. They fit for Dragon, Revell, Vespid etc. Because of the sag it will not properly fit with other brands Pz. III kits, but I'll give it a try later.
So I start this project just to look how it works. You have to build the main chassis and running gear except the driving wheels. You can glue all the wheels in place, except the idler wheels. Here I recommend to dry fit first, to make sure everything is aligned correctly. In my case the tracks seems to me 2-3 mm to short, so that I had to adjust the position of the idler wheel to get a proper fit. Here I only made an oval whole out of the round whole to fix the idler wheel a bit more forward. I also add a brass pin inside of the driving wheel to get a correct fit as well.
Well it is not a shake and bake as I first thought, but with just a little work you will get excellent tracks for your scale 1/72 tanks.
I can highly recommend this product and hope they will increase their range.
About the Dragon Stug III, nothing else to say, because it is an excellent kit!
Happy Modelling, Christian

Simon Nagorsnik
This looks interesting- i follow!

Tom B.
Those 3d-printed tracks look really neat 👍 I´m following this!

Christian Bruer
Welcome aboard Simon and Tom. Still enough place in the first row.

Christian Bruer
Last modelmaking in 2023, progress on the Stug III.
Happy Modelling and a Happy New Year to all Scalemates🙂

Alec K
Following along, and Happy New Year 👍

Christian Bruer
You're welcome Alec 🙂

Spanjaard
looking good. happy 2023 Christian

Christian Bruer
Thx Spanjaard 🙂

Dave Flitton
Following

Christian Bruer
You're welcome Dave 🙂
WIP Stug III, Dragon scale 1/72. I finished the basic work today. I made some improvements and added storage items on the engine deck.
Tracks are 3D printed from Fat Frog Scale Models, accessoires are Black Dog and ModellTrans Modellbau, figures are Dynamo Models.
Happy Modelling
Christian

Christian Bruer
WIP on my Stug III, basic painting is done, next colour modulation with oils.
Happy Modelling
Christian

Guy Rump
Looking great. 👍

Alec K
Christian, you make it look easy 🙂

Christian Bruer
Thx a lot Guy and Alec 🙂

Christian Bruer
First figure is painted. Dynamo Models figures, 3D printed in excellent and sharp quality and figures with lifelike and interesting poses.
Happy Modelling
Christian

Rui S
Excellent figure painting 👍

Christian Bruer
Thank you Rui 🙂

Christian Bruer
Figure #2 is done.
Happy Modelling, Christian

Spanjaard
excellent

Christian Bruer
Thx Spanjaard 🙂

Christian Bruer
WIP on my Dragon Stug III painting process.

1. Basic painting using Vallejo 71.025 (Dark Yellow) and highlights 71.025 + 71.001 (White)
2. Chipping and scratches using Vallejo 70.862 (Black Grey) + 71.001 and contours using 71.025 + 71.001
3. Washes using oils, Yellow Ocre, Medium Yellow, Raw Umber and White
4. Highlights using oils, Yellow Ocre, Medium Yellow, and White

Now the paint needs to dry completely before I can add final touches with oils and acrylics.

Happy Modelling
Christian

Spanjaard
superb!

Christian Bruer
Thanx Spanjaard 🙂
The Sturmgeschütz is done. The last detail I have added was a cover in between the gun mantlet and the casemate to keep it clear from water and dust. Only later versions got this modification out of the factory. Before it is often seen as a field modification.

Finally a crew is added. I used the excellent Dynamo-models Stug crew.

Next will be a small vignette to present the Sturmgeschütz.

Happy Modelling
Christian

Pietro De Angelis
WOW!

Christian Bruer
Thx for the WOW Pietro 🙂

Marcin Dudek
1/72?! No way, it looks like 1/35. Perfect job👏

Christian Bruer
Thank you very much for your kind comment Marcin 🙂

Alec K
Another beauty, very inspirational 👍