Notícias

Christian Bruer
Recently I stepped into the 3d printed product range from Fat Frog Scale Models. This company from Hongkong offers highly detailed 3d printed tracks for all common German WWII tanks in scale 1/72. In the case of these Pz. III tracks the driving wheel is printedt together with the tracks. They fit for Dragon, Revell, Vespid etc. Because of the sag it will not properly fit with other brands Pz. III kits, but I'll give it a try later.
So I start this project just to look how it works. You have to build the main chassis and running gear except the driving wheels. You can glue all the wheels in place, except the idler wheels. Here I recommend to dry fit first, to make sure everything is aligned correctly. In my case the tracks seems to me 2-3 mm to short, so that I had to adjust the position of the idler wheel to get a proper fit. Here I only made an oval whole out of the round whole to fix the idler wheel a bit more forward. I also add a brass pin inside of the driving wheel to get a correct fit as well.
Well it is not a shake and bake as I first thought, but with just a little work you will get excellent tracks for your scale 1/72 tanks.
I can highly recommend this product and hope they will increase their range.
About the Dragon Stug III, nothing else to say, because it is an excellent kit!
Happy Modelling, Christian

Simon Nagorsnik
This looks interesting- i follow!

Tom B.
Those 3d-printed tracks look really neat 👍 I´m following this!

Christian Bruer
Welcome aboard Simon and Tom. Still enough place in the first row.

Christian Bruer
Last modelmaking in 2023, progress on the Stug III.
Happy Modelling and a Happy New Year to all Scalemates🙂

Alec K
Following along, and Happy New Year 👍

Christian Bruer
You're welcome Alec 🙂

Spanjaard
looking good. happy 2023 Christian

Christian Bruer
Thx Spanjaard 🙂

Dave Flitton
Following

Christian Bruer
You're welcome Dave 🙂
WIP Stug III, Dragon scale 1/72. I finished the basic work today. I made some improvements and added storage items on the engine deck.
Tracks are 3D printed from Fat Frog Scale Models, accessoires are Black Dog and ModellTrans Modellbau, figures are Dynamo Models.
Happy Modelling
Christian

Christian Bruer
WIP on my Stug III, basic painting is done, next colour modulation with oils.
Happy Modelling
Christian

Guy Rump
Looking great. 👍

Alec K
Christian, you make it look easy 🙂

Christian Bruer
Thx a lot Guy and Alec 🙂

Christian Bruer
First figure is painted. Dynamo Models figures, 3D printed in excellent and sharp quality and figures with lifelike and interesting poses.
Happy Modelling
Christian

Rui S
Excellent figure painting 👍

Christian Bruer
Thank you Rui 🙂

Christian Bruer
Figure #2 is done.
Happy Modelling, Christian

Spanjaard
excellent

Christian Bruer
Thx Spanjaard 🙂

Christian Bruer
WIP on my Dragon Stug III painting process.

1. Basic painting using Vallejo 71.025 (Dark Yellow) and highlights 71.025 + 71.001 (White)
2. Chipping and scratches using Vallejo 70.862 (Black Grey) + 71.001 and contours using 71.025 + 71.001
3. Washes using oils, Yellow Ocre, Medium Yellow, Raw Umber and White
4. Highlights using oils, Yellow Ocre, Medium Yellow, and White

Now the paint needs to dry completely before I can add final touches with oils and acrylics.

Happy Modelling
Christian

Spanjaard
superb!

Christian Bruer
Thanx Spanjaard 🙂
The Sturmgeschütz is done. The last detail I have added was a cover in between the gun mantlet and the casemate to keep it clear from water and dust. Only later versions got this modification out of the factory. Before it is often seen as a field modification.

Finally a crew is added. I used the excellent Dynamo-models Stug crew.

Next will be a small vignette to present the Sturmgeschütz.

Happy Modelling
Christian

Pietro De Angelis
WOW!

Christian Bruer
Thx for the WOW Pietro 🙂

Dietmar Bogatzki
Great build and paintjob, so far 👍

Mr James
Beautiful amount of detail going into this build 👌

István Szücs
Great work so far!

Bob Hall
Sweet ! 👍

István Szücs
I would drill out the exhaust tips.

Mal Rademaker
Istvan - That's a good idea. They are still on the spue and yet to be repainted in chrome with SMS Hyperchrome paint.

Roland Sachsenhofer
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...

Robert Podkoński
Taking a seat here, too 🙂

Roland Sachsenhofer
It's a pleasure!

gorby
Nice work.

Kai R. Ingebrigtsen
Done, I think. Might take better pics of it.

Jim Hawksworth
What a cool idea! Looking really great.

Kai R. Ingebrigtsen
Thanks, Jim. When nothing fits and the initial plan goes out the window.. just think "what would Hollywood do?"

Carlos Cisneros
Watch "The Hunters" to see what Hollywood would do with a F-84F… 😉

Pretty cool looking "Mig"

Kai R. Ingebrigtsen
Hah! That's pretty cool, Carlos! Never seen that before. Thanks for the info, inspirational.

Carlos Cisneros
Casey Jones 😉

Robert Podkoński
Cool!

Nicolas
Following

Freak
Wow, beautiful shading!!

CaptGPF
Agree with Freak

Bruce Huxtable
Watching in anticipation of the final unveiling 🙂

Robert Podkoński
Watching with interest.