Notícias

Rui S
Welcome to scalemates🙂

Rui S
Welcome to scalemates🙂

Rui Reis
Great looking build, mate! You should post that on whatifmodellers.com, i'm sure folks there will appreciate it. Cheers!

F-104
Hi Rui Reis, thanks for your feedback. This is actually no Whatif model, the French did test 2 Do-335 after the war, V14 and V17. V17 was a Do-335 B6, a 2 seater nightfighter prototype. I have built it and will show it on Scalemates soon. Best J.

Rui Reis
LOL! Guess i should've noticed that the decals are included in the kit and it was a real one... sorry about that. Still, great build anyway!

F-104
Hey, no problem. 😃
P.S. I only added the decal version after your feedback, so you couldn't have seen it.

Rui S
Welcome to scalemates🙂

Mr D
Thanks Alberto 👍
How's the Be-12 going?

Robert Podkoński
Watching with interest 🙂

Mr D
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.

Mr D
Thanks Villiers 👋😃👍
.fun little builds good for filling gaps on the shelf .

Guy Rump
Looking good, following. 👍

Skyhiker
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.

Mr D
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣

Mr D
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.

Ben M
Is that a Su-9 in photo 10?

Mr D
Hi Ben 👋
It's
Starfighter,
F-14 tomcat,
Mig-21
Mig-23 ground attack version.
👍

Ben M
😍

Guy Rump
Lovely collection. 👍

Mr D
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .

Mr D
^^ full size 🤣🤣 1:48 ^^

Ben M
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.

gorby
Nice result on all of them.

Mr D
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍

Mr D
Thanks for the lovely Likes 😁👍
Will have to look into the fiddly weapons next.

Skyhiker
Looking good

Andrzej Rygiel
I like to do 144th scale minis in between some bigger scale models and your Tigershark is an eye-catcher, it will really stand out in this bright livery! Gives me some ideas for my next builds 😉

Mr D
Hi Andrzej.
Thanks 👍 yes they are nice to do now n then between or after bigger builds.
Yes it's a nice bright red, the Northrop factory colour.
Good luck with your projects 👍👍

Mr D
Thanks for the Likes everyone 😀👍
Nice quick easy little build, the paints are AK Intense acrylic.

Miguel Vaquero
Looking pretty good D. Amazing as always

Mr D
Hi Miguel 👋, thanks ... appreciate it.
This one was moulded quite good, l had to build up the bottom intake on one side a little, but l think that was me not fitting the part level.
I have an F-4 phantom from this range in the stash, l managed to get so 144 German decals for it ....they cost more than the kit 🙄🤣.

Miguel Vaquero
Well I'm really hoping to see more of your 144 work because it's impressive. And as for the F4 decals, well, spending money is the biggest part of this hobby 🤣🤣

Mr D
True 🤣 l need a good soviet cockpit paint now 🙄

Trez
I think Eduard used to do a 1:144 Me262 which might be your cup of tea!

gorby
Impressive painting! I like the scheme.

Alex K
Following with interest.

Ben M
👀

gorby
Looks an interesting build.

Miguel Vaquero
Following!!

Matti Thomaes
Watching

Jan Peters
Welcome mates

Jan Peters
Made a careful start. Parts are a mixed bag, some very nicely done, some a bit crude and oversized.

Jan Peters
Any thoughts on how to make the anti radar material on the snorkel?

Matti Thomaes
Can't help you there Jan, I didn't even know there was anti-radar material on the snorkel...

Jan Peters
I had a go at it, looks more crude in the pictures then it looks in real life, might do some fine tuning later

Sebastian Meyner
Nice work so far Jan 👍 Following with interest 👀

Jan Peters
Thanks Sebastian, and welcome 🤗

Jan Peters
It would be nice to see someone do a 3d printed snorkel someday.

Guy Rump
Looking great, following. 👍

Jan Peters
Thanks Guy, and welcome mate.

gorby
Beautiful result!

gorby
Excellent!

gorby
Very nice work!

Mr James
That is one impressive paint job. Excellent skills shown with an airbrush 🙂

Bernd Grün
Schönes Modell, Simon! Exzellente Lackierung, Glückwunsch! 👌👌

Pipeman86
Hey Simon, richtig richtig gut!! Vor allem auch die Grundierung nach dem Verschleifen (Bild 1). Mega!!!

gasolier
Cool scheme! Well done

John Thomas
Very nice

Simon
Thank you very much guys!!

Vielen Dank Bernd und Chris!! Als nächstes werden die Markierungen auf den Seitenleitwerken und den Tragflächen gesprayt!! 🙂

Ben M
fun project. you should paint a giraffe next 🙂

Simon
Yes, certain similarities in the camouflage pattern cannot be denied. 🙂 It wasn't really the intention, it was supposed to be a mix of larger and smaller patches. But I still like it now. 🙂

Ben M
It looks really remarkable. You have constant density for all the patches. Skills!

Simon
Thanks Ben! 🙂

Alberto
Cool camo, nice paint job 👍

Simon
Thank you Alberto 🙂 Now i have to repaint the engines/intakes/nozzles.

Jan Peters
Beautiful camouflage pattern you have painted here!

Simon
Thank you very much!! 🙂 That pushes me to go on with the repainting of the intake / nozzle part! 🙂

Vincent
Great scheme. This looks great!!!

Simon
Thank you Vincent! 🙂

Skyhiker
I love this kit, it was one of my favorite to build. You have done a masterful job on that camo. Looks great.

HSC1932
This is the best Arado 555 I've seen, and I've seen many. What paint did you use to achieve that excellent finish?

Simon
Many thanks to you both! I'm really pleased that you like the paintwork! The project has already taken a lot of time so far. At first I thought it would be a quick job, but in the end the sanding, re-engraving and the countless thin layers of paint have taken a lot of time. Probably also because I watch series on the side 🙂

@HSC1932: I now only use Vallejo colours, mostly the Model Air colours if available. I also thin them a lot now: 4:2:3 (Flow Improver : Thinner : Paint). For the two main colours I used Vallejo MA 71.257 Light Blue RLM76 and MA 71.259 Grey Violet RLM75.

Hans-Jürgen Haag
👍👍Sieht heiß aus das Teil, besonders die Camouflage, hast du da ein Netz drüber gelegt und drüber gesprüht?

Simon
Moin Hans-Jürgen! Vielen Dank!! Ne, das habe ich mit ganz wenig Druck, geringem Abstand und der Politik der ruhigen Hand gemacht! 😉

Michael Kohl
Top paint job.

Simon
Vielen Dank Michael!!

CaptGPF
One word - AMAZING!

Simon
Thank you very much CaptGPF!!! 🙂

Secretary at ESSMC
Love the paint job - looks "submarine"
Great kit - see mine from a few years ago..SCM Search: roger trewenack arado*
I'll keep watching your work!

Simon
Thanks Mr. Secretary! 😅 Now that you mention it, it does look a bit like a ray. A ray with giraffe skin. 😁 Your Arado looks great too! What an idea with the camouflage. 👍🏼

Ben M
A girayffe if you will.

Simon
They are incredibly good at snorkelling! 🤣

Gerald
👍

Guy Rump
Looking good, like the different camo. 👍

Johne 69
Nice paintjob 👍

Simon
Thanks a lot mates. I urgently need to continue with the Arado. In the meantime, I had already applied all the decals. But I had actually bought a new kit of the Ar 555 because the old decals were partly printed with misalignment. In general, the new decals were of much better quality. Next up is another coat of gloss varnish to protect against the subsequent oil wash.

Mr James
Lovely rusty burnt out work. Looks great

Thomas E.
Thank you for comment and likes.

Thomas E.
My contribution for Videomodelshow 2024 of Hamilkar Barkas.
cf. Youtube Video

gorby
Impressive work! It looks great.