Notícias
bughunter@scalemates
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and dele posts and agree or disagree with this user being a spammer: Go to vote page
Reporting: YES, this is a spammer
SPAM ALERT
According to me, this user is NOT a Scale Modeler and his profile should be DELETED.
SPAM ALERT
Please help usVerify this user and dele posts and agree or disagree with this user being a spammer: Go to vote page
8 October, 13:38
schecter87
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
8 October, 13:28
schecter87
I bought this kit about four years ago. At the time, I wanted to try car modeling, but with Revell, the experience wasn't successful. Now it's time to take it out of the box and finish it. After buying this kit, I decided I'll never buy Revell again 🙁
I bought this kit about four years ago. At the time, I wanted to try car modeling, but with Revell, the experience wasn't successful. Now it's time to take it out of the box and finish it. After buying this kit, I decided I'll never buy Revell again 🙁
8 October, 13:37
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
39 imagens
Italeri | No. 2703 | 1:48 | Republic F-84F Thunderstreak "i Diavoli Rossi" (WIP)Novo: 8 October, 13:35 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Projeto: Republic F-84F Thunderstreak
50 1 February 2023, 11:58
Stefan Fraundorfer
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
5 December 2023, 16:09
Mark Sherwood
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
12 December 2023, 08:01
Neil
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
6 January, 11:14
John
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
9 February, 16:31
Neil
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
14 February, 20:54
Donald Dickson II
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
8 July, 15:14
Neil
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
8 July, 15:45
Donald Dickson II
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
8 July, 17:28
Francky
Metalisers require a certain sense of masochism 🙂 I always try to paint the metaliser last, although mskign the red in this case is challenging, I admit. In general, the sequence of paints is very important in all cases and is certainly important with pesky colors such as yellow
Metalisers require a certain sense of masochism 🙂 I always try to paint the metaliser last, although mskign the red in this case is challenging, I admit. In general, the sequence of paints is very important in all cases and is certainly important with pesky colors such as yellow
16 July, 16:19
Bill Gilman
Added a new review for:
Added a new review for:
TIE Advanced x1 Sienar Fleet Systems TIE Advanced x1 Prototype
Bandai 1:72
0191407 (2259074) 2014 Produto novo 8 October, 13:34
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
20 imagens
ESCI/Humbrol | No. 4060 | 1:48 | Aermacchi MB-326K Impala (WIP)Novo: 8 October, 13:34 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Projeto: Aermacchi MB-326K IMPALA
20 4 December 2023, 11:03
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
9 imagens
Special Hobby | No. SH48017 | 1:48 | Gloster E.28/39 Pioneer (Squirt) "First British Jet"Novo: 8 October, 13:29 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Projeto: Gloster E.28/39
4 27 August, 11:16
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
21 imagens
Monogram | No. 85-5497 | 1:48 | F9F-5P Panther | Reconnaissance (WIP)1:48
WORK IN PROGRESS. UPDATED: 26/6/24...
Projeto: Grumman F9F Panther
22 24 July 2023, 09:07
John
Watching, nice progress. I love the old Monograms, lots of work but they look pretty good.
Watching, nice progress. I love the old Monograms, lots of work but they look pretty good.
25 July 2023, 11:45
Neil
Hello John and Villiers, thanks for stopping by 🙂 and thanks for your comments and also others for likes too. I'm with you John, I like these old Monogram kits 👍 - well you know I have a penchant for vintage builds anyway! 🙂 I've never built a Panther before - such a lovely shaped airframe, I think I'm gonna enjoy.
Hello John and Villiers, thanks for stopping by 🙂 and thanks for your comments and also others for likes too. I'm with you John, I like these old Monogram kits 👍 - well you know I have a penchant for vintage builds anyway! 🙂 I've never built a Panther before - such a lovely shaped airframe, I think I'm gonna enjoy.
26 July 2023, 16:06
Mr D
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
66 imagens
Romanian lAR-80 Fighter Novo: 8 October, 13:32 1:48
Decals and clear finshed
Projeto: Hobbyboss IAR-80
26 13 August, 21:46
Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍
18 August, 13:25
Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍
20 August, 11:14
Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍
21 August, 09:08
Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?
26 August, 13:14
Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍
26 August, 13:42
Doubtingmango
Brilliant! The putty really can create a mess with finely molded details
Brilliant! The putty really can create a mess with finely molded details
26 August, 15:01
Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???
26 August, 19:18
Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep
26 August, 19:29
Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍
30 August, 19:09
Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome
I got to get myself a chrome pen. The result on those details look awesome
4 September, 09:53
Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.
4 September, 09:58
Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums
18 September, 19:29
Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍
18 September, 19:59
Mr D
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
Thanks Miguel 👍 the office-tak used to mask.
Will try panel lines n wash for first time on this one
😁👍👍
6 October, 19:34
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
15 imagens
Monogram | No. 5445 | 1:48 | Northrop F-20 Tigershark (WIP)Novo: 8 October, 13:32 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Projeto: Northrop F-20 Tigershark
9 10 July, 13:14
Josafat
quer este item
quer este item
Porsche 911 RSR 2018 LM GTE Class Winner 991 RSR "Pink Pig"
NuNu Model Kit 1:24
PN24040 2024 Produto novo 8 October, 13:31
Neil
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
4 imagens
Revell Monogram | No. 85-7546 | 1:48 | Northrop P-61 Black WidowNovo: 8 October, 13:31 1:48
WORK IN PROGRESS. UPDATED: 8/10/24...
Projeto: Northrop P-61 Black Widow
2 7 February, 10:07
Rod -
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
20 28 August, 15:05
Rod -
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
This kit is more than 50 years old and amazingly good. The original tires in my kit had decomposed to mush so I got some Tamiya RC tires, machined some rims and 3d printed some centres.
The kit comes with a motor, lights and wiring. Motor hidden in engine block, 4x AA in the fuel tank. It even has little uni joints on the tail shaft.
28 August, 15:12
Rod -
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
I've spent a bit of time trying to get the stance right. Out of box it sits quite high.
28 August, 15:13
Rod -
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
I have a cnc lathe at home. It has a 75mm spindle bore, a bit bigger than a hobby lathe 🙂
28 August, 23:01
Rod -
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
Dash gauge decals pinched from a 1/12 foose camaro kit. The original decal sheet only gives you 3 choices of screaming chicken and a big blue stripe. No badges or detailing of any kind. The silver trim is a separate piece. I glued some green felt on the floor for carpet.
22 September, 12:05
Rod -
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
I'm waiting on some 3d printed brake rotors and calipers. There will be more pics soon 🙂
22 September, 14:38
Rod -
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
Some more progress. Body was painted white with a black fade under the horizontal crease along the side of the body. Then the green/gold pearl, then about 5 coats of green tinted clear. When it hardens I'll polish, add decals and put the final 2k clear on. The camera can't capture the color, it looks nice sitting on the bench 🙂
3 October, 08:04
Rod -
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
This is my first 1/12 car. It needs way more paint than a 1/24! I used 2-1/2 bottles of sms pearl. Instead of using hobby clear coat I bought a can of clear acrylic spray from the auto parts store and decanted it for mixing and airbrushing. Good quality paint and much cheaper!
3 October, 08:07
Rod -
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
I glued the boot shut as the fit wasn't perfect and there's nothing to see in there anyway (4x AA batteries, loaded from the bottom). I also am not confident the opening doors will work perfectly so I glued one shut. That way at least one side of the model will look clean if the door fit is a bit crappy.
3 October, 08:12
Thomas Wirsching
Great color choice! I am not into car modelling but yours look great!
Great color choice! I am not into car modelling but yours look great!
3 October, 09:40
Rod -
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
Pic 11 is probably closest to what it actually looks like. All the pics look sort of aqua and over exposed. In reality it's a bit darker with a fine pearl effect.
3 October, 11:13
Milos Kajtez
quer este item
quer este item
Shinmeiwa PS-1 `The First Production´ w/ Tractor Limited Edition
Hasegawa 1:72
02427 2023 Peças novas 8 October, 13:30
Milos Kajtez
marcou este item como encomendado
marcou este item como encomendado
Mitsubishi A6M2b/A6M3 Zero Fighter Type 21/22 'Rabaul Ace Set'
Hasegawa 1:72
02437 2023 Conjunto de modelos 8 October, 13:29
Milos Kajtez
quer este item
quer este item
Mitsubishi G4M1 Type 1 Attack Bomber Models 11 `Rabaul Front Line Inspection´ w/Figure Limited Edition | 1/72 scale Isoroku Yamamoto figure parts included
Hasegawa 1:72
02435 2023 Peças novas Tópico múltiplo (2)8 October, 13:29
Milos Kajtez
marcou este item como encomendado
marcou este item como encomendado
B-239 Buffalo & Messerschmitt Bf109G-6 `Juutilainen´ w/Figure
Hasegawa 1:72
02439 2023 Peças novas Tópico múltiplo (3)8 October, 13:29
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pt
35
35
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo