Notícias
Thomas Neuss@Steffen
Hallo,
sind die Mosquito Control Surfaces und Flame Dampening Exhaust Shrouds noch verfügbar und zu verkaufen?
Viele Grüße
Thomas
Hallo,
sind die Mosquito Control Surfaces und Flame Dampening Exhaust Shrouds noch verfügbar und zu verkaufen?
Viele Grüße
Thomas
9 September, 19:46
Steffen
Hallo Thomas, ja, die sind noch da!
Hättest du sonst noch an etwas aus meinem Stash Interesse?
Gruß, Steffen
Hallo Thomas, ja, die sind noch da!
Hättest du sonst noch an etwas aus meinem Stash Interesse?
Gruß, Steffen
11 September, 21:00
Thomas Neuss
Hi - die beiden Sachen sind dann alles. Ich komme mir selber etwas dämlich vor, dass ich das übersehen habe, als ich die Mosquito angefragt habe... seufz. Jetzt bin ich alles durchgegangen. Viele Grüße, Thomas
Hi - die beiden Sachen sind dann alles. Ich komme mir selber etwas dämlich vor, dass ich das übersehen habe, als ich die Mosquito angefragt habe... seufz. Jetzt bin ich alles durchgegangen. Viele Grüße, Thomas
12 September, 05:04
Steffen
Hi Thomas, damit ich das Porto bestimmen kann, muss ich wissen, wo du wohnst. Wäre PayPal ok? Gruß, Steffen
Hi Thomas, damit ich das Porto bestimmen kann, muss ich wissen, wo du wohnst. Wäre PayPal ok? Gruß, Steffen
12 September, 21:26
Thomas Neuss
Hallo,
der Versand wäre in Deutschland, hier schon mal meine Adresse:
Thomas Neuss
Wilhelm-Leuschner-Weg 5
25524 Itzehoe
PayPal (Freunde) ist völlig ok für mich.
Viele gRüße
Thomas
Hallo,
der Versand wäre in Deutschland, hier schon mal meine Adresse:
Thomas Neuss
Wilhelm-Leuschner-Weg 5
25524 Itzehoe
PayPal (Freunde) ist völlig ok für mich.
Viele gRüße
Thomas
13 September, 06:43
Thomas Neuss
Hi Steffen,
das wären dann 13.- für die Control Surfaces und 10.- für die Exhaust Shrouds + Porto, richtig?
Viele Grüße
Thomas
Hi Steffen,
das wären dann 13.- für die Control Surfaces und 10.- für die Exhaust Shrouds + Porto, richtig?
Viele Grüße
Thomas
13 September, 14:22
Steffen
Ganz genau! Das sollte als Großbrief für 1,60 EUR gehen.
Mein PayPal: steffen.kunze@posteo.de
Ganz genau! Das sollte als Großbrief für 1,60 EUR gehen.
Mein PayPal: steffen.kunze@posteo.de
13 September, 21:16
Thomas Neuss
Prima - ich habe Dir per PayPal das Geld gesendet.
Viele Grüße und schon mal vielen Dank 🙂
Thomas
Prima - ich habe Dir per PayPal das Geld gesendet.
Viele Grüße und schon mal vielen Dank 🙂
Thomas
14 September, 11:46
Steffen
Super, danke, kam an! Ich bin morgen wieder zu Hause und melde mich, sobald ich versendet habe. Gruß, Steffen
Super, danke, kam an! Ich bin morgen wieder zu Hause und melde mich, sobald ich versendet habe. Gruß, Steffen
14 September, 23:46
Thomas Neuss
Prima - eilt nicht, ich bin ab Mittwoch ohnehin 10 Tage unterwegs... 🙂
Prima - eilt nicht, ich bin ab Mittwoch ohnehin 10 Tage unterwegs... 🙂
15 September, 11:07
Moreno Baruffini
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
4 imagens
Italian Panavia Tornado ECR Novo: 14 September, 13:30 1:72
Projeto: Italian Panavia Tornado ECR
9 September, 18:08
Moreno Baruffini
During the summer I wasn't idle, but I started some projects 😜.
This is the biggest, that I'll try to keep active in the following months.
During the summer I wasn't idle, but I started some projects 😜.
This is the biggest, that I'll try to keep active in the following months.
15 September, 11:06
Ali Yulianto
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
43 30 September 2023, 11:59
Ali Yulianto
Since Meng's instruction is much better than Takom's. I started my Meng Apache first and use the build experience for the Takom one later.
Since Meng's instruction is much better than Takom's. I started my Meng Apache first and use the build experience for the Takom one later.
30 September 2023, 12:17
JollyRogers64
Great progress. Compared to TAKOM, MENG has included the right component. In your original picture you can't see any grille, just the radiator and the glass cover in front of it.
Great progress. Compared to TAKOM, MENG has included the right component. In your original picture you can't see any grille, just the radiator and the glass cover in front of it.
10 March, 23:19
Ali Yulianto
Thanks @JollyRogers64. Looks like it, although I'm not too sure if it's a glass or a very fine mesh.
Thanks @JollyRogers64. Looks like it, although I'm not too sure if it's a glass or a very fine mesh.
16 March, 07:58
Ali Yulianto
Posted last update after a long hiatus with my wife's health condition. Finished the M230 chain gun and painted the Longbow radar and main body.
Posted last update after a long hiatus with my wife's health condition. Finished the M230 chain gun and painted the Longbow radar and main body.
16 March, 08:01
Ali Yulianto
Thanks John, much appreciated. Wife is better now but still recovering.
Thanks John, much appreciated. Wife is better now but still recovering.
15 September, 10:23
M0rce
Sweet, so much more detail than the academy 1:48.
Lovely job your doing with it 👍
Sweet, so much more detail than the academy 1:48.
Lovely job your doing with it 👍
15 September, 11:03
Sudesh
quer este item
quer este item
Buccaneer Late style ejection seats
Aerocraft Models 1:48
ACM-48057 15 September, 11:02
Alberto Jimenez
possui este item
possui este item
AN/ALQ-131/Deep/ECM Pod used on A-7, A-10, F-4, F-16, F-111, C-130 Aircraft
MH Models 1:72
K72091 2024 Produto novo 15 September, 11:02
Alberto Jimenez
possui este item
possui este item
ESCAPAC IE-1 Ejection Seat Set for Lockheed S-3B Viking
MH Models 1:72
K72063 15 September, 11:02
Alberto Jimenez
possui este item
possui este item
ALQ-184 ECM Pod / Long used on A-10, F-4G, F-16, C-130 Aircraft
MH Models 1:72
K72092 2024 Produto novo 15 September, 11:01
Romain Sablou
adicionou um novo álbum de fotos.
adicionou um novo álbum de fotos.
77 1 May, 11:47
Romain Sablou
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again
Picture 8 : I screw up riveting on the second wing. 😅 I was thinking that doubling the number of rivet lines was a good idea on this part of the wing, turned out it wasn't...
I used Tamiya Surfacer to cover everything and start again
8 May, 17:37
Alec K
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍
Thanks for the explanation. I thought maybe you were implementing some hight end stressed skin technique 🙂. Amazing work all around 👍
9 May, 12:09
Gary Victory
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.
A real pain doing the riveting but so satisfying once it's done. Lovely work Romain.
6 June, 06:54
Romain Sablou
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌
Thank you all for your interest ! This is my first attempt on riveting an all airplane, I wouldn't say it was painful, but rather a looong and sometime tiring job. Overall I really enjoyed the experience and the satisfation when highlighting the rivets with a black wash 👌
6 June, 07:38
Jakub Fiala
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.
Very nice work, so far. Riveting looks perfect 👍 I´ve just ordered a new release of Edugawa F/G Marauder, so i will look for some inspiration here.
14 June, 18:49
Romain Sablou
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌
Thanks ! Yes, this new release of the F/G version is great news for all Marauder fan 👌
29 June, 17:04
Romain Sablou
Thanks guys, glad to finally paint something after all this preliminary work !
Thanks guys, glad to finally paint something after all this preliminary work !
16 July, 14:35
Spanjaard
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!
my respect for somebody who can do a complete riveting of a plane... and you said it was your first? how, that looks truly amazing! beautiful cockpit too!
14 September, 22:17
Romain Sablou
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏
Thank you all ! Yes first time, pretty happy with the result. I received good advices from my French "Sensei" Julien Haccoun 🙏
15 September, 10:15
Caleb Nave
quer este item
quer este item
Ukrainian Submarine
Project 641 Foxtrot Class - "Zaporizhzhia" MikroMir 1:350
350-019 2015 Produto novo 15 September, 10:56
Alberto Jimenez
possui este item
possui este item
Su-25 Frogfoot correct fan
Quickboost 1:48
QB 49109 15 September, 10:56
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=pt
35
35
/pt/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo