Hms King George V 1942
![Album image #1 Album image #1](/albums/img/6/5/0/1007650-18150-62-720.jpg)
For my first time building a ship model, I am using the Tamiya 1:350 HMS Prince of Wales to represent HMS King George V in early 1942. I have the Pontos set and the Eduard sets, though there are a lot of details missing or incorrect in both of those sets for the time period I am building. This means I am needing to us various additional detail sets as well as a lot of scratch building.
![Album image #2 Album image #2](/albums/img/6/5/1/1007651-18150-86-720.jpg)
The bridge is mostly finished apart from the carley floats, cable reels, Oerlikons, pom-pom directors and stairs. I had to rebuild the back part of the first two decks as the kit parts for this area represented a later refit of the KGV.
![Album image #3 Album image #3](/albums/img/6/5/2/1007652-18150-75-720.jpg)
The two diagonal pipes seem to be some sort of vents from the hangars below. The four etch boxes are ammo boxes for the pom-poms, with with what seems to be some sort of counterbalance on their lids.
![Album image #4 Album image #4](/albums/img/6/5/3/1007653-18150-46-720.jpg)
The boat deck is currently in progress. I am trying to work out the exact types and locations of the boats, but there are very few references available showing this area.
![Album image #5 Album image #5](/albums/img/6/5/4/1007654-18150-26-720.jpg)
![Album image #6 Album image #6](/albums/img/6/5/5/1007655-18150-93-720.jpg)
The three 14" turrets are complete, with a mixture of Pontos and Eduard details
![Album image #7 Album image #7](/albums/img/6/5/6/1007656-18150-43-720.jpg)
YX Models stud link chain and North Star anchors, with scratch built connectors.
![Album image #8 Album image #8](/albums/img/6/5/7/1007657-18150-14-720.jpg)
![Album image #9 Album image #9](/albums/img/6/5/8/1007658-18150-93-720.jpg)
![Album image #10 Album image #10](/albums/img/9/0/6/1007906-18150-84-720.jpg)
Various oerlikon gun tubs. For the bow on the left and stern on the right.
![Album image #11 Album image #11](/albums/img/9/0/7/1007907-18150-83-720.jpg)
![Album image #12 Album image #12](/albums/img/9/0/8/1007908-18150-59-720.jpg)
Catheads. The Pontos versions were somewhat disappointing being significantly undersized and simplified.
![Album image #13 Album image #13](/albums/img/9/0/9/1007909-18150-77-720.jpg)
![Album image #14 Album image #14](/albums/img/9/1/0/1007910-18150-44-720.jpg)
![Album image #15 Album image #15](/albums/img/9/1/1/1007911-18150-35-720.jpg)
![Album image #16 Album image #16](/albums/img/9/4/6/1120946-18150-77-720.jpg)
Finished off the boat deck with railing and boat racks
![Album image #17 Album image #17](/albums/img/9/4/7/1120947-18150-13-720.jpg)
Incredible Micro Master 3d printed ships boat
![Album image #18 Album image #18](/albums/img/9/4/8/1120948-18150-64-720.jpg)
Partially scratch built crane with photo etch boom
![Album image #19 Album image #19](/albums/img/9/4/9/1120949-18150-37-720.jpg)
![Album image #20 Album image #20](/albums/img/9/5/0/1120950-18150-24-720.jpg)
Cable reels
![Album image #21 Album image #21](/albums/img/3/6/7/1121367-18150-27-720.jpg)
The kit hull was completely smooth, but there were quite prominent plates on the real ship. The options for displaying these were to mask the plates and add paint to create a raised area, or to scribe in the plates. I went with the second option. First job was to mark horizontal lines around the hull, then using Dymo tape and micro chisels, I started scribing.
![Album image #22 Album image #22](/albums/img/3/6/8/1121368-18150-71-720.jpg)
First few lines done
![Album image #23 Album image #23](/albums/img/3/6/9/1121369-18150-16-720.jpg)
Once the main horizontal lines were done, I used a scribing tool to add vertical panel lines. It looks a bit over the top here, but will hopefully be less visible under a few coats of paint.
![Album image #24 Album image #24](/albums/img/3/7/0/1121370-18150-52-720.jpg)
Bottom of the hull done. Again, maybe a bit too much, but it shouldn't be too visible.
![Album image #25 Album image #25](/albums/img/3/7/1/1121371-18150-17-720.jpg)
Bow fairlead arrangement completed, mostly scratch built.
![Album image #26 Album image #26](/albums/img/3/7/2/1121372-18150-44-720.jpg)
Starting to add the degaussing cables. The solid sections have been replaced with styrene strip.
![Album image #27 Album image #27](/albums/img/3/7/3/1121373-18150-20-720.jpg)
Catapult in place. A few extra details have been added to the Pontos parts.
![Album image #28 Album image #28](/albums/img/3/7/4/1121374-18150-93-720.jpg)
Deck hatches on the stern have been opened up, with steps added (made from small sections of cable ties).
![Album image #29 Album image #29](/albums/img/3/7/5/1121375-18150-19-720.jpg)
![Album image #30 Album image #30](/albums/img/3/7/6/1121376-18150-70-720.jpg)
![Album image #31 Album image #31](/albums/img/5/4/7/1126547-18150-34-720.jpg)
Continuing work on the hull with propeller shafts and supports added
![Album image #32 Album image #32](/albums/img/5/4/8/1126548-18150-20-720.jpg)
around 160 portholes glued into position
![Album image #33 Album image #33](/albums/img/5/4/9/1126549-18150-21-720.jpg)
Ladders made from 0.2mm wire. There are eight of these around the hull with 5 steps each
![Album image #34 Album image #34](/albums/img/5/5/0/1126550-18150-81-720.jpg)
![Album image #35 Album image #35](/albums/img/3/5/6/1168356-18150-71-720.jpg)
![Album image #36 Album image #36](/albums/img/3/5/7/1168357-18150-60-720.jpg)
![Album image #37 Album image #37](/albums/img/3/5/8/1168358-18150-51-720.jpg)
![Album image #38 Album image #38](/albums/img/3/5/9/1168359-18150-76-720.jpg)
![Album image #39 Album image #39](/albums/img/3/6/0/1168360-18150-85-720.jpg)
![Album image #40 Album image #40](/albums/img/3/6/2/1168362-18150-58-720.jpg)
![Album image #41 Album image #41](/albums/img/3/6/4/1168364-18150-13-720.jpg)
![Album image #42 Album image #42](/albums/img/3/6/3/1168363-18150-19-720.jpg)
![Album image #43 Album image #43](/albums/img/3/6/7/1168367-18150-98-720.jpg)
![Album image #44 Album image #44](/albums/img/3/6/6/1168366-18150-20-720.jpg)
![Album image #45 Album image #45](/albums/img/3/6/5/1168365-18150-34-720.jpg)
![Album image #46 Album image #46](/albums/img/3/9/0/1182390-18150-11-720.jpg)
I scratch built new propeller shafts and supports to better fit the bronze propellers from Prop Shop. I also have the rear Oerlikons in place.
![Album image #47 Album image #47](/albums/img/3/9/1/1182391-18150-15-720.jpg)
Chains for the anchors and paravanes in place
Comentários
26 2 May 2020, 20:49
![](/profiles/img/46533-553-s.jpg)
Peter really like this, one of the things I always struggle with is gluing tiny etch parts and getting it to look tidy. Photo 3 is incredible.
27 May 2021, 08:51
![](/profiles/img/18150-833-s.jpg)
Thanks for the feedback. I also struggle with gluing tiny parts Mark, it feels like each one required at least three attempts ?. Treehugger, if you are talking about the things on the right hand side of photo 15, these are flag lockers for signalling flags.
29 May 2021, 22:35
![](/profiles/img/41450-890-s.jpg)
Yes I struggle with these small parts as well and I try and steer clear of CA wherever possible as there are alternatives
2 July 2021, 18:35
![](/profiles/img/102691-453-s.png)
So fabulous detail work- impressive!
you need steady hands and patience
5 December 2021, 16:22
![](/profiles/img/33854-496-s.jpg)
I'm watching this build with great interest, as I am hoping to make the jump from aircraft to ships in the near future. It wont be anything as ambitious as this but this build is giving me a lot of ideas. The level of detail and ingenuity with the scratch building is impressive.👍
5 December 2021, 16:31
![](/profiles/img/45816-678-s.jpg)
Always thought Ship building a bit of a dark art especially with all that P.E.
Total respect to anyone who has the patience and mind set to take to that level of detail.
Really nice work Peter. 👍
13 December 2021, 07:45
![](/profiles/img/72708-240-s.jpg)
RFantastic all the PE and the scratchbuilding, the paintjob, hope sometime i can built a ship, by myself 👍
12 February 2022, 11:25