USS Nimitz CVN-68 2005
Comentários
21 30 May 2021, 18:34
![](/profiles/img/33194-509-s.jpg)
Very nice! Are you going to add additional details to your airwings as well? And will you add crew-figures? I built my "TR" with a lot of figures, was quite a challenging work, but very rewarding in the end!
30 August 2021, 07:34
![](/profiles/img/28845-385-s.jpg)
So the kit comes with the lower deck as well? Interesting. I was thinking it could look nice next to the container ship 'Colombo Express' in the same scale.
30 August 2021, 09:45
![](/profiles/img/75126-368-s.jpg)
Yes Treehugger. The Colombo Express is excellent for a diorama as well. Hajo, I add the figures from Eduard only 🙂
30 August 2021, 17:57
![](/profiles/img/33194-509-s.jpg)
Ich habe die Figuren mit Ponal-Holzleim eingestrichen - das trocknet dann "dick" auf, bleibt aber klar und transparent. Noch einmal mit Mattlack drüber, damit die Figuren nicht glänzen, und schon sind die Herrschaften "dick"!
[img1]
I put woodglue on the figures. The glue dries transparent, but makes them a bit "thicker". A final matt clear coat prevents the glossy look the glue would otherwise cause.
31 August 2021, 05:44
![](/profiles/img/28845-385-s.jpg)
I can see myself having fun with this kit. Especially with photo etch, but also spending time scraping the small jets so that they have thinner wings, and maybe fill in any panel lines seen on the small jet models.
31 August 2021, 07:18
![](/profiles/img/28845-385-s.jpg)
Btw, there is even photo etch products for the catapult ramps, specifically the jet blast deflectors.
31 August 2021, 11:58
![](/profiles/img/28845-385-s.jpg)
I wonder, if the scribed detailing on the deck is found too deep, one could easily sand down the plastic to reduce the depth of the scribed lines I am thinking. Having said that, I guess it is possible that the more plastic you remove, the slightly wider the panel line becomes.
31 August 2021, 12:00
![](/profiles/img/28845-385-s.jpg)
I think I will sand the uneven surface perfectly smooth myself (when I get the non-2005 kit), because the rough plastic would not be to scale.
25 September 2021, 08:06
![](/profiles/img/28845-385-s.jpg)
Tip: Looking at photo number 10. If you want to fill in sink marks and holes, I suggest adding Vallejo putty, but in such a way that the putty sticks up like an ice cream cone, then you can let it dry abit, then cut off the top with a sharp blade, then sand smooth once the putty had dried enough on top so that the putty doesn't shrink further, super easy compared to using other types of putty I would think. Vallejo putty normally shrink, but if you give it a top, then it can shrink as much as it wants, one just cut off the excess at the end.
25 September 2021, 08:09
![](/profiles/img/33194-509-s.jpg)
Aren´t you folding the wings of that F-18? Or is it just a placeholder yet?
26 September 2022, 15:27