Fw 190-D progress

1
August 21, 2021
Cockpit finished. This is the Profipack and I chose to use the PE. I must say I'm a bit disappointed by the detail. It is very flat. I would recommend painting or using the decals instead. The seatbelts are fine, though.
2
August 21, 2021
3
August 21, 2021
The part of the engine that can be seen through the wheel bay and the gun bay is very detailed. I like it! 🙂
4
August 21, 2021
5
August 21, 2021
6
August 21, 2021
7
August 21, 2021
8
August 21, 2021
All the small parts painted and weathered. I made a little modification to be able to mount either the bomb or the extra tank.
The wing assembly in the picture is a mix up. It is from the Ta 152 that I'm building in parallel. 😉
9
September 12, 2021
The Dora is assembled and the windscreen attached.
10
September 12, 2021
Canopy and gun compartment cover are glued with PVA glue to the fuselage.
11
September 12, 2021
Canopy has been masked off in preparation for paint.
12
September 12, 2021
Inner paint is applied. I've also painted the silver under the gun compartment cover and masked it off.
13
September 12, 2021
Result after black base and marbling with Tamiya XF-1 and XF-2.
14
September 16, 2021
Starting to mask and paint the main camoflage.
15
September 16, 2021
According to the manual the plane underwent an engine change. That is the reason for the RLM83 paint in the front.
16
September 16, 2021
Masking and painting the camoflage for the under side.
17
September 16, 2021
18
September 16, 2021
Masking for the upper camoflage.
19
September 16, 2021
20
September 16, 2021
21
September 16, 2021
Masking for the yellow-white bands for JG 2. Firstly a white base.
22
September 16, 2021
Masking for the yellow bands.
23
September 16, 2021
Happy with the result 🙂
24
September 16, 2021
I chose to mask and paint the markings. Starting with the top side of the wing.
25
September 16, 2021
Nice! 🙂
26
September 16, 2021
Side markings. I chose to mask them separately as it is easier to line them up.
27
September 16, 2021
28
September 16, 2021
29
September 16, 2021
Happy with the result! 🙂
30
September 16, 2021
Next step is to add a clear gloss layer before applying the rest of the decals and stencils.
31
October 1, 2021
The Dora is finished! 🙂
32
October 1, 2021
33
October 1, 2021
34
October 1, 2021
35
October 1, 2021
36
October 1, 2021
37
October 1, 2021
38
October 1, 2021
39
October 1, 2021
40
October 1, 2021
41
October 1, 2021
The cowl over the gun bay is a little loose as I chose to make it possible to open it and look inside.
42
October 1, 2021
I had a bit of a mishap when applying the gloss after putting on the stencils. The clutter behind the wing is a result of the stencil being blown off and misplaced when spraying the gloss.. 🙁
43
October 1, 2021
44
October 1, 2021
45
October 1, 2021
46
October 1, 2021
47
October 1, 2021
48
October 1, 2021
49
October 1, 2021
50
October 1, 2021
51
October 1, 2021
Comparison with the Ta-152C.

Comentários

18 21 August 2021, 15:50

Björn Svedberg
Second Fw build in my parallell build. This time the Dora. 🙂

21 August 2021, 15:53

Erik Leijdens
This one is a bit more challenging then the HobbyBoss Ta-152 I think! Good luck mate 👍

23 August 2021, 06:47

Björn Svedberg
You are so right, Erik! Lots of details and also some fit issues with this one. Thanks!

23 August 2021, 16:04

Björn Svedberg
After assembly, the Dora is now in the same state as the other two fw's. The marbling is quite a taxing job, and to do three planes in a row is taking its toll. I'm glad it's over 🙂.

12 September 2021, 09:36

Björn Svedberg
Some more progress on the 190D. Main camoflage and markings are finished. I chose to mask and paint the markings instead of using the decals.

16 September 2021, 12:52

Alan G
Looking great Bjorn

16 September 2021, 15:37

Alan G
Do you make your own masks for the numbers?

16 September 2021, 15:44

James C
Looking good 👍

16 September 2021, 17:09

Björn Svedberg
Thanks Alan and James! 🙂
@Alan, I scanned the decal sheet and created a vector drawing from it that i cut out in my Cameo cutting machine.

16 September 2021, 17:42

Alan G
Ah ok thanks. I've thought about getting a Silhouette Cameo myself

16 September 2021, 17:44

Björn Svedberg
Finally, the last of the three Focke Wulf builds is finished! Here is the Dora! 🙂
Next will be painting the figures from ICM 🙂

1 October 2021, 14:13

Alan G
Bjorn. I have loved your three builds. This caps them off beautifully

1 October 2021, 15:10

Björn Svedberg
Thank you Alan! 🙂

2 October 2021, 07:40

Rui S
Great Work 👍

2 October 2021, 14:00

Erik Leijdens
Another stunner!

2 October 2021, 14:09

Björn Svedberg
Thank you Rui and Erik! 🙂

3 October 2021, 08:07

Album info

Progress pictures of my build of the Fw 190-D9 in 1:48-scale.

Late Dora

60 imagens

1:48

Concluído

1:48 Luftwaffe Pilots and Ground Personnel (ICM 48082)

Focke-Wulf Fw 190D-9

Wehrmacht Luftwaffe (German Air Force 1935-1945)
3./JG 2 Richthofen W.Nr.500645/6+I
Maio 1945 World War 2 - Altenstadt
NMFChrome RLM76 RLM81 RLM82 RLM83

Todos os álbuns

Ver todos os álbuns »