Pe-2FT by MisterCraft build log

1
April 28, 2023
All the contents.
2
April 28, 2023
I wonder whose molds Mr Craft is using?
3
April 28, 2023
The mold details are good and crisp with no obvious flash.
4
April 28, 2023
Panel lines are raised, but the detail looks good.
5
April 28, 2023
Clear parts are clear.
6
April 28, 2023
The provided decals are well off register.
7
April 28, 2023
The Bilek decals allow for a 1944 variant in a winter dressing, which I am busy researching. I think they were based in Poland with Russian markings, and would of been the white paint that wears very easily exposing the green below (like in the project cover picture).
8
April 28, 2023
Some new tools that I am eager to try out.
9
April 28, 2023
I've seen worse loose fits.
10
April 28, 2023
The wheel well is rather bare and the inner plate doesn't sit deep enough. Some scratch work is called for.
11
April 28, 2023
I am trying sculpting clay to form some depth. It will take 24 to 48 hours to dry, and I hope to sand it flat and cut out the hole in the plates to form the wheel well relief.
12
April 29, 2023
The wheel wells are now much more believable.
13
April 30, 2023
So far the self drying clay looks to be working out, so I have used it to create some closure to the wing tip inlets. It easily squeezes between the wing halves, and then poked through with a toothpick.
14
April 30, 2023
Some major surgery to the fuselage bottom. I want to pose the crew hatches in open position.
15
May 1, 2023
I am happy with this level of detail for the scale.
16
May 1, 2023
It is the cockpit entry hatch on the belly.
17
May 2, 2023
Some progress on the cockpit floor. It is visible from the top and the bottom, so hopefully the effort is worth it.
18
May 2, 2023
And some side wall details. I invented an electrical cupboard to cover the molding of the wing spar ?
19
May 3, 2023
I feel this is enough scratch building for the main cockpit. Onto the rear gunners position.
20
May 4, 2023
The void ope is a bit complex to form from styrene, so I am trying the self drying clay again.

Comentários

18 28 April 2023, 15:54

DerMattes
Following 🙂

28 April 2023, 16:53

Живко Джаков
Me too! ; )

28 April 2023, 19:45

Guy Rump
me three! 👍

30 April 2023, 11:17

Bernd Grün
I'm in! Following. 👍

30 April 2023, 18:33

Tyson Tu
Me too (or is it five?)! Always fun and inspirational to watch your work 👍

2 May 2023, 15:59

Michael Jonker
Thanks Tyson. Careful now. Cheapness and OCD are both very contagious 😂. Your ship work is gorgeus.

2 May 2023, 20:23

komoras
I like the way where this is going 👍

3 May 2023, 06:24

Robert Podkoński
Following, of course!

3 May 2023, 15:57

Moreno Baruffini
I totally agree with the above, your work is really inspiring!

3 May 2023, 16:12

Tyson Tu
Michael, many thanks for the kind words on my ship builds 🙂
As for the OCD and scrounging for parts, I'm afraid it's too late on both counts 😉

3 May 2023, 21:20

Villiers de Vos
Lots of detail created. Nice progress.

4 May 2023, 18:14

Rolf Rolf
I like how you pick unusual subjects to make a model on, I would much rather make some strange German ww2 aircraft than a 109

21 May 2023, 11:04

Jennifer Franklin
Any progress on this kit recently? I am impressed with the self-drying clay, it works well.

29 May 2023, 03:25

Album info

I am stepping out a bit on this €8 budget kit with €3 aftermarket decals. I ran away from some scribing practice on a "BigModel" kit, which was too terrible, even for me... This one will do nicely. Also planned is a distressed winter camo scheme and some interior scratch building.

Petlyakov Pe-2

20 imagens

1:72

Em progresso

1:72 Pe-2FT 'Peshka' (MisterCraft 050269)

Todos os álbuns

Ver todos os álbuns »