AMX-13 Build
![Album image #1 Album image #1](/albums/img/7/1/6/1096716-79500-89-720.jpg)
My material: Tamiya's AMX-13 with single-link tracks from Takom, as I cannot stand vinyl tracks. Also, feel free to marvel at the disaster that is the state of my workbench.
![Album image #2 Album image #2](/albums/img/7/1/7/1096717-79500-32-720.jpg)
![Album image #3 Album image #3](/albums/img/7/1/8/1096718-79500-20-720.jpg)
The barrel is one piece, but the muzzle brake is formed from two. They came together quite nicely and needed only a little bit of putty.
![Album image #4 Album image #4](/albums/img/7/1/9/1096719-79500-56-720.jpg)
![Album image #5 Album image #5](/albums/img/7/2/0/1096720-79500-75-720.jpg)
The kit has tools with molded-on clamps. I wanted to display a vehicle that has been more or less forgotten in some damp warehouse corner, with tools partially having been taken off for whatever reason. I removed the clamps from the hammer (mounted on the front plate) and axe (back plate) and replaced the clamps on the vehicle itself woth some copper standins. This was actually my first time doing this. Turns out, working thin copper sheet isn't THAT complicated.
![Album image #6 Album image #6](/albums/img/7/2/4/1096724-79500-52-720.jpg)
New (empty) clamps where the axe would have been mounted.
![Album image #7 Album image #7](/albums/img/7/2/9/1096729-79500-82-720.jpg)
![Album image #8 Album image #8](/albums/img/7/3/0/1096730-79500-68-720.jpg)
![Album image #9 Album image #9](/albums/img/7/3/2/1096732-79500-51-720.jpg)
Assembly of the tracks went smoothly. Luckily, the links from Takom turned out to be quite easy to handle, not a massive amount of cleanup necessary.
![Album image #10 Album image #10](/albums/img/7/3/1/1096731-79500-28-720.jpg)
![Album image #11 Album image #11](/albums/img/7/3/4/1096734-79500-37-720.jpg)
Once cured, the tracks could simply be taken off by carefully bending them. I didn't close up the track to facilitate this.
![Album image #12 Album image #12](/albums/img/7/3/5/1096735-79500-32-720.jpg)
![Album image #13 Album image #13](/albums/img/7/3/3/1096733-79500-94-720.jpg)
I applied some thinned putty on the turret to get a better texture. Not yet smoothed out.
![Album image #14 Album image #14](/albums/img/7/3/7/1096737-79500-21-720.jpg)
After sanding.
![Album image #15 Album image #15](/albums/img/7/3/6/1096736-79500-19-720.jpg)
Completed texture.
![Album image #16 Album image #16](/albums/img/7/3/8/1096738-79500-80-720.jpg)
Like with the tools, the fixture for the jerry can on the turret was molded in. I build a replacement from copper foil and a piece of thin styrene sheet.
![Album image #17 Album image #17](/albums/img/7/3/9/1096739-79500-67-720.jpg)
Came out quite nicely.
![Album image #18 Album image #18](/albums/img/7/4/0/1096740-79500-76-720.jpg)
Build mostly done.
![Album image #19 Album image #19](/albums/img/7/4/1/1096741-79500-86-720.jpg)
![Album image #20 Album image #20](/albums/img/7/4/2/1096742-79500-18-720.jpg)
The tools. I didn't manage to build replacements for the strips holding the shovel and pickaxe to the turret, so I had to leave them on. Axe and hammer will later on be placed on the vignette.
![Album image #21 Album image #21](/albums/img/7/4/3/1096743-79500-38-720.jpg)
I applied a rusty base coat, as I wanted to use chipping fluid to give the vehicle a thoroughly forgotten look. This was my first attempt. It would later turn out that I did something wrong with the green layer on top, as parts of it came off during chipping (down to and including the primer). I had to redo everything after scrubbing off my first attempt using isopropyl alcohol and a bunch of not too enjoyable time.
![Album image #22 Album image #22](/albums/img/7/4/6/1096746-79500-22-720.jpg)
![Album image #23 Album image #23](/albums/img/7/4/4/1096744-79500-90-720.jpg)
My second attempt. This time, I made sure to seal up the rusty primer layer. I also added a second layer with chipping fluid in-between to get a less unified, smoothly gradiented look.
![Album image #24 Album image #24](/albums/img/7/4/5/1096745-79500-17-720.jpg)
I was somewhat tempted to put this into a scene as a wreck, but I wanted to stay with my original idea of a vehicle parked and forgotten.
![Album image #25 Album image #25](/albums/img/7/4/7/1096747-79500-37-720.jpg)
With green coat and chipping to reveal the rusty base coat.
![Album image #26 Album image #26](/albums/img/7/4/8/1096748-79500-67-720.jpg)
![Album image #27 Album image #27](/albums/img/7/4/9/1096749-79500-74-720.jpg)
![Album image #28 Album image #28](/albums/img/7/5/0/1096750-79500-38-720.jpg)
Completely assembled, save for the running gear and turret tools.
![Album image #29 Album image #29](/albums/img/7/5/1/1096751-79500-23-720.jpg)
Running gear and tracks. The wheels were painted just like the vehicle itself. The tracks only got one coat of AK's track primer, a number of random splotches of AK's rust colors and where then speckled with the very same.
![Album image #30 Album image #30](/albums/img/7/5/2/1096752-79500-75-720.jpg)
Affixing the tracks to the vehicle.
![Album image #31 Album image #31](/albums/img/7/5/5/1096755-79500-69-720.jpg)
Decals applied.
![Album image #32 Album image #32](/albums/img/7/5/3/1096753-79500-17-720.jpg)
I added a bit of Ammo's Dust Enamel Wash on the track's upper surfaces, but I didn't fancy that one too much, so I didn't repeat it for the vehicle itself.
![Album image #33 Album image #33](/albums/img/7/5/4/1096754-79500-98-720.jpg)
Backside numberplate. I left off the decal for the front number plate, as the exact spot where it would have been has been heavily corroded. I added a few tiny splotches of black color to hint at remnants (no image, sadly).
![Album image #34 Album image #34](/albums/img/7/5/6/1096756-79500-80-720.jpg)
![Album image #35 Album image #35](/albums/img/7/5/7/1096757-79500-13-720.jpg)
This was the first time I used an oil dot filter. I found it to be a quite simple and enjoyable technique!
![Album image #36 Album image #36](/albums/img/7/5/8/1096758-79500-67-720.jpg)
Tools for the turret finally done and added to the vehicle. Save for the final coat of ultra-matt varnish, the AMX-13 is done!
![Album image #37 Album image #37](/albums/img/7/6/4/1096764-79500-82-720.jpg)
Now for the vignette. I wanted it to be some dank warehouse corner, where the tank had been placed many years ago and been basically forgotten.
![Album image #38 Album image #38](/albums/img/7/6/5/1096765-79500-49-720.jpg)
Base and walls are made from XPS foam. The concrete pads on the ground (not visible here) are thick cardstock, sealed with black modpodge. A technique I kinda stole from tabletop crafting, just like the walls.
![Album image #39 Album image #39](/albums/img/7/6/1/1096761-79500-24-720.jpg)
Black modpodge base coat on the first two segments of wall, the three concrete pillars and the base. The third piece of wall is still in white.
![Album image #40 Album image #40](/albums/img/7/6/0/1096760-79500-12-720.jpg)
I painted everything using my airbrush. Aside from some minute overspray here and there, this was a quick and painless process.
![Album image #41 Album image #41](/albums/img/7/5/9/1096759-79500-11-720.jpg)
Everything was glued together using PVA wood glue.
![Album image #42 Album image #42](/albums/img/7/6/2/1096762-79500-76-720.jpg)
Test fitting the AMX for the first time.
![Album image #43 Album image #43](/albums/img/7/6/3/1096763-79500-35-720.jpg)
Adding some weathering. The window frame is still missing, as is the little shelve I want beneath part of it.
![Album image #44 Album image #44](/albums/img/7/6/6/1096766-79500-87-720.jpg)
Completed vehicle.
![Album image #45 Album image #45](/albums/img/7/6/7/1096767-79500-65-720.jpg)
![Album image #46 Album image #46](/albums/img/7/6/8/1096768-79500-66-720.jpg)
Completed vignette.
![Album image #47 Album image #47](/albums/img/7/6/9/1096769-79500-43-720.jpg)
![Album image #48 Album image #48](/albums/img/7/7/3/1096773-79500-57-720.jpg)
![Album image #49 Album image #49](/albums/img/7/7/4/1096774-79500-12-720.jpg)
![Album image #50 Album image #50](/albums/img/7/7/5/1096775-79500-79-720.jpg)
![Album image #51 Album image #51](/albums/img/7/7/6/1096776-79500-99-720.jpg)
Comentarii
9 25 October 2021, 18:52
![](/profiles/img/118183-835-s.jpg)
Nice job 👍 I completely agree on the "rubber bands" the kits often come with.
8 December 2022, 23:48
![](/profiles/img/79500-362-s.png)
Thanks, you two. This was an enjoyable project, even if it had some noticeable downs. At least I learned that isopropyl alcohol isn't the best paint stripper once your get to more resistant paints. 🙂
9 December 2022, 08:55
![](/profiles/img/118183-835-s.jpg)
If a project doesn't have any downs, you're probably doing a Snap-Tite kit!
9 December 2022, 13:29