Perete
Wall
Jakub Fiala
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (12) » 21 1 August, 12:38
Jakub Fiala
Thank you, Frank!
I want to build 8244/17 of Jasta 54. This marking is, according Eduard instructions, just a reconstruction based on the description in the flight log, revealed in the Jasta Color book. So, in my opinion it will be difficult to buid it 100% correct 🙂 However, I will of course be grateful for any advice and recommendations
Thank you, Frank!
I want to build 8244/17 of Jasta 54. This marking is, according Eduard instructions, just a reconstruction based on the description in the flight log, revealed in the Jasta Color book. So, in my opinion it will be difficult to buid it 100% correct 🙂 However, I will of course be grateful for any advice and recommendations
21 August, 18:10
bughunter
Ok, on a Pfalz D.IIIa the engine is different. The very simplified Eduard (the pipe work on the lower end of the cylinders is the water, what you have painted dark red - but this is not much visible later) engine shows a older 160hp Mercedes D.III. This is especially shown by the valve train, which can be seen on top of the engine.
Two bolts on top, and the valve in the middle: [img1]
The later 185hp Mercedes D.IIIa was also available for some Pfalz D.III, and nearly all of Pfalz D.IIIa pictures shows this stronger version. The drawings I know too. The engine is a little bit bigger, but the valve train looks very different - four bolts and the valves rockers comes out of the side:
[img1]
Roden has a better representation of this engine (same sprue on all kits), and it is also more correct in size. That means I cannot get it into this model 🙁
No worries mate, only an expert will notice on the finished model 🙂
And regarding the wings: I strongly recommend Aviattic decals. The ones printed on clear paper (normal) and the ones printed on white for rib tapes. Or you use the Eduard rib tapes. I have some build logs explaining the usage.
Ok, on a Pfalz D.IIIa the engine is different. The very simplified Eduard (the pipe work on the lower end of the cylinders is the water, what you have painted dark red - but this is not much visible later) engine shows a older 160hp Mercedes D.III. This is especially shown by the valve train, which can be seen on top of the engine.
Two bolts on top, and the valve in the middle: [img1]
The later 185hp Mercedes D.IIIa was also available for some Pfalz D.III, and nearly all of Pfalz D.IIIa pictures shows this stronger version. The drawings I know too. The engine is a little bit bigger, but the valve train looks very different - four bolts and the valves rockers comes out of the side:
[img1]
Roden has a better representation of this engine (same sprue on all kits), and it is also more correct in size. That means I cannot get it into this model 🙁
No worries mate, only an expert will notice on the finished model 🙂
And regarding the wings: I strongly recommend Aviattic decals. The ones printed on clear paper (normal) and the ones printed on white for rib tapes. Or you use the Eduard rib tapes. I have some build logs explaining the usage.
30 August, 15:56
August 26, 2024
Jakub Fiala
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (60) » 110 10 June, 22:58
Patrick Hagelstein
Thank you for the detailed explanation, Jakub! Very good to know! 👍🏼
Thank you for the detailed explanation, Jakub! Very good to know! 👍🏼
26 August, 21:21
August 5, 2024
Jakub Fiala
completat acest articol
completat acest articol
P-51 Mustang Diamond Tread Wheels
Barracuda Studios 1:72
BR72497 5 August, 19:55
July 22, 2024
July 12, 2024
July 8, 2024
July 6, 2024
July 1, 2024
June 20, 2024
June 19, 2024
June 18, 2024
June 16, 2024
June 14, 2024
June 11, 2024
Jakub Fiala
a început acest articol
a început acest articol
P-51 Mustang Diamond Tread Wheels
Barracuda Studios 1:72
BR72497 11 June, 11:37
June 10, 2024
April 19, 2024
April 9, 2024
Jakub Fiala
deține acest articol
deține acest articol
P-51 Mustang Diamond Tread Wheels
Barracuda Studios 1:72
BR72497 9 April, 10:23
April 6, 2024
April 4, 2024
Jakub Fiala
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (50) » 101 23 November 2023, 12:01
Alec K
I agree with Bughunter: excellent build. I really like your weathering, subtle and effective 👍
I agree with Bughunter: excellent build. I really like your weathering, subtle and effective 👍
4 April, 19:04
March 30, 2024
March 29, 2024
March 24, 2024
March 19, 2024
March 18, 2024
March 12, 2024
March 11, 2024
March 8, 2024
February 24, 2024
February 21, 2024
February 17, 2024
February 15, 2024
December 19, 2023
December 15, 2023
Jakub Fiala
vrea acest articol
vrea acest articol
Junkers Ju 88A/C - Open Wing Fuel Filler Points (2 Pcs.)
CMK (Czech Master Kits) 1:72
Q72394 2021 Instrumentul nou 15 December 2023, 19:23
Jakub Fiala
vrea acest articol
vrea acest articol
Spitfire 5 spoke wheels set (3 types of tires)
Brengun 1:48
BRL48098 15 December 2023, 14:52
December 14, 2023
December 3, 2023
Jakub Fiala
a adăugat un nou photoalbum.
a adăugat un nou photoalbum.
All comments (57) » 105 29 June 2023, 12:47
Alec K
Glorious finish. That thing slung underneath is superb, very well done Jakube 👍
Glorious finish. That thing slung underneath is superb, very well done Jakube 👍
1 December 2023, 14:37
November 16, 2023
Jakub Fiala
completat acest articol
completat acest articol
Ar 234C for Dragon, DML, Shanhgai Dragon, Revell, Platz, Hobby 2000
Eduard 1:72
CX613 2021 Instrumentul nou 16 November 2023, 00:19
November 10, 2023
November 9, 2023
November 7, 2023
September 24, 2023
wnolder.php?lang=ro
2023-09-24 11:31:19
2016-01-12 15:58:02
23186
/ajax/wnolder.php?lang=ro&sd=2023-09-24 11:31:19&md=2016-01-12 15:58:02&filter=&w=23186
todo