A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | Нет. RS32-0001 | 1:32

Факты

Фирма:: ResKit
Заголовок:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Число:: RS32-0001
Масштаб:: 1:32
Тип:: Набор деталей
Вышел:: 2020 Новая разработка
Штрих-код:: 4589913295353 (EAN)
Тема:: Grumman A-6 Intruder » Реактивные (Авиация)

Предназначен для

Этот набор дополнения предназначен для:

Trumpeter

2013

2014

Новая разработка

Новые детали

Магазин

Интернет-магазины

USD 15.31Имеется в наличии »

USD 17.24

Нет на складе »

€ 13.80

USD 15.63Нет на складе »

¥ 1836

USD 13.80Нет на складе »

zł 61.95

USD 16.37Нет на складе »

Альтернативные SKU для ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Заметка: Цены и наличие являются ориентировочными. Также проверьте, действительно ли продукт соответствует!

Oбзор содержимого коробки

Внешние обзоры

Мы не знаем об обзорах содержимого коробки A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) от ResKit.

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38