Новостная лента
Martin Oostromдобавил новый фотоальбом.
4 изображения
WIP - Mercedes 500 SEC
1:24
After stripping, all panel lines needed to be cleaned and mould lines needed to be sanded
Проект: Mercedes-Benz 500 SEC
10 September, 18:09
Martin OostromWhile waiting for better weather to paint Bumblebee, this one got dug up from the stash.
I bought it second hand and some parts were glued decently and the body was painted blue, badly. After stripping all lines need to be cleaned and the body needs to be sanded.
10 September, 18:12
1_72добавил новый фотоальбом.
5 изображения
PB4Y-2 Privateer 1:72, 1958.
Before decals, finishing paint touch and stencil weathering. Few parts still separated. Photo background removed so noth...
2 3 September, 19:02
1_72What about Vallejo Lucky Varnish?
I picked satin one for this project but after doing a couple of work trials, I threw up the idea of using it. It dries in somehow awful way, leaving on the surface an ugly, non-uniform structure. Really dissapointed with this one so lucky me (not this varnish) that I didn't use it on the model right away.
In general, I appreciate Vallejo products very, very much, which makes the whole matter even more surprising. Or maybe it's just me? Maybe I could messed something up? Please share your ideas. Thx.
10 September, 18:09
Martin Oostromдобавил новый фотоальбом.
10 September, 18:05
Martin OostromAnother ghost build that started in my vacation. All parts are ready for paint, unfortunately the weather isn't cooperating.
10 September, 18:08
Łukasz Glińskiдобавил новый фотоальбом.
7 изображения
Maršal Tito's Sabre Yug
1:72
Waiting for corrections and detailing
Проект: F-86D Sabre Yug
26 23 August, 20:54
Łukasz GlińskiForgot to photograph the cockpit before adding the canopy - hope you forgive me that 😛
25 August, 19:58
Mr DComing along nicely 👍
Did you use masking fluid on the canopy??
Thanks for uploading... interesting build 😃👍
25 August, 21:16
Łukasz GlińskiYes Mr D, I went for the fluid as I found I haven't stocked my stash with the masks for this particular kit. Hope they will work well enough.
26 August, 19:00
CuajeteWell done so far, Łukasz!
That screw in photo 2 looks like a worm that is in the process of metamorphosis inside a sabre dog 😛
28 August, 17:49
Lorraine Linдобавил новый фотоальбом.
55 26 August, 05:51
Robert PodkońskiWow! This is going to be a true masterpiece... Watching with pleasure and interest!
26 August, 05:55
ICM 1:48
Kesa Tihoдобавил новый фотоальбом.
2 изображения
Tiger 1, trying to mimic an american 75mm howitzer shell fired at it
1:48
Проект: Tiger 1 (shot at)
Scratchbuilt
10 September, 17:43
John Brueton@KarljunWill you post to the UK?
10 September, 13:19
John BruetonYou also have a Merc AMG GT as well I'm interested in, would you take €30 for both+ postage
10 September, 14:00
Ronaldвладеет этим предметом
Consolidated Liberator G.R. Variants in RAF Coastal Command and RCAF Service
Photo Archive Нет. 30
Pavel Türk
10 September, 17:50
Sid de Koningвладеет этим предметом
General Dynamics
F-16 Fighting Falcon - Late Wheels Set for Tamiya kit Eduard 1:48
648708 2022 Новая разработка 10 September, 17:50
Ronaldвладеет этим предметом
Avro Lancaster Mk.I/III Early Production Batches 1941-1943
Wingleader Photo Archive Нет. 5
Richard Alexander
2020 10 September, 17:50
Sid de Koningвладеет этим предметом
General Dynamics
F-16 Fighting Falcon - Early Wheels Set for Tamiya kit Eduard 1:48
648707 2022 Новая разработка 10 September, 17:50
Ronaldвладеет этим предметом
Avro Lancaster Mk I/III Late Production Batches 1943-1945
Wingleader Photo Archive Нет. 15
Mark Postlethwaite
2022 10 September, 17:49
Nathan Dempseyдобавил новый фотоальбом.
25 изображения
Yak-52 Ukraine - Drone Hunter
1:48
Build complete.
Проект: Yak-52 Ukraine “Drone Hunter”
37 22 July, 21:16
Nathan DempseyWelcome Torsten & Robert!
I've started the fuselage assembly and clamps were needed.
27 July, 15:43
DutchNathan, I am following along as well. I have friends in eastern Ukraine, so very interested in this one. Kind regards, Dutch
31 July, 20:47
Nathan DempseyWelcome Dutch! This build is turning into a slog. Clamps and super-glue "force-holds" galore. Luckily it is a tiny plane so I'm nearly done already, just completing all the seam sanding.
1 August, 18:44
Nathan DempseyWorking on the cowl. I had to use 2-part epoxy clay to fill a large gap on the bottom of the cowl that was created by making the cowl fit straight & level.
8 August, 20:53
DutchLooking good. Keep up the progress. The splinter pattern will be stupendous when done.
13 August, 16:03
Nathan DempseyThanks Dutch! Man I just realized looking at pictures that the wing camo is a mirror image for the other wing. It won't be perfect… 😁
13 August, 20:47
Nathan DempseyWelcome to the show Ben! I've applied the first color today. Now off to cut masks for the next color. I've been spoiled by those pre-cut masks…
16 August, 17:41
DutchNathan, quick question. Why not just spray the first color overall, then mask only the subsequent colors? Saves at least one step, I should think. Carry on. I am enjoying the show.
16 August, 17:47
Nathan DempseyIn this case I just got a little too happy masking. I even decided against my usual preshade since this plane's paint looks really new in all the pictures.
17 August, 17:20
DutchNathan, are you going to put kill markings on it?
google.com/url?sa=t&..e2eYFcXbT_ewibuKmesM
18 August, 20:13
Nathan DempseyWell my printer is dead, but my dad has a similar one so I'm going to try… Wish me luck.
19 August, 17:35
Nathan DempseyThe second color has been applied. Slow going here as my workbench time has been lacking.
25 August, 14:13
Nathan DempseyThanks Dutch! Today I masked off the areas for the gloss black. The tan colored areas are quite small, but they're everywhere. Tamiya tape stock is going up!!
26 August, 17:32
Nathan DempseyWell my gloss black was solidified, so flat black will have to do. Hopefully it will all even out when the clear is applied
28 August, 00:20
Nathan DempseyThanks Jennifer and Villiers!
Work continues on masking these tiny sections.
30 August, 16:13
Nathan DempseyWell that was a whole bunch of masking for some very tiny pixels… I also added a coat of Future to help with the panel lining effort to come.
3 September, 23:57
Nathan DempseyToday has seen the underside color selected and applied (Tamiya X-14 Sky Blue) along with masking/painting the cowl colors using Steel & Red.
4 September, 13:58
Nathan DempseyI'm using both AK & Mig panel wash. For the bottom I used Grey-Blue and for the top I haven't decided whether I'll use a dark brown or black wash. Of course for the black areas I'll use the Stone Grey wash which I think is Mig.
4 September, 18:28
Nathan DempseyThanks LC & Guy!
More masking for the Ukrainian flag on the tail today.
6 September, 01:59
Nathan DempseyThanks Robert!
Chrome Yellow has been applied for the first half of the Ukrainian flag on the tail.
6 September, 14:53
Nathan DempseyThe Ukrainian flag on the tail has been completed and the landing gear legs have been painted and attached.
7 September, 23:01
Nathan DempseyThanks Dutch! Today I completed painting the canopy framing and the wheels. Also my clear gloss arrived in the mail today, so I'll be able to apply that to the entire aircraft. After that I only need to paint the anti-glare panel on the upper cowl. Nearing the finish line.
9 September, 20:31
DutchOoh-la-la! Well done Nathan. Definitely a special addition to the display case.
10 September, 15:54
Duster_dдобавил новый фотоальбом.
2 8 September, 17:21
David Orrдобавил новый фотоальбом.
6 изображения
Italeri HSS-1 Seabat
1:72
A relatively easy to build kit that I built for my son. It is painted with Vallejo Prussian Blue acrylic, Mr Hobby Shine...
Проект: Italeri HSS-1 Seabat
10 10 September, 03:29
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo