Новостная лента
Nicolas
добавил новый фотоальбом.
добавил новый фотоальбом.
34 изображения
WIP: Eurocopter BK-117 "Space Design" D-HBKS Новый: 11 August, 18:38 1:72
decals on the panel and the buckles of the seatbelts scratched from alutape. With the litle bit one can see when the fus...
Проект: BK 117 "SPACE DESIGN"
17 24 June, 19:12
Nicolas
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
As soon as I finish one of my 3 current projects (2 of them ar nearly done) I will start with this little helicopter.
24 June, 19:17
Nicolas
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
As I am covid positive (fortunately only with very mild syntomas) I had some time to build again today. So far I am positively surprised by the accuracy of fit. There are no locator pins, but I can now click the fuselage and cockpit together and even the tail section holds without glue.
8 July, 19:15
Nicolas
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
I would like to do some rivets on the exteriour, but I couldn't find some good drawings. If somebody has a hint I would be grateful.
8 July, 19:56
Nicolas
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
Today I started installing the controls. Doing so I noticed, the collectiv controls are missinh in the kit. So I started scratchbuilding them after photos. Also fabricated and installed blinds for the paxes.
9 July, 19:06
Shar Dipree
I have the same kit too. I'm really looking forward to your results. Following. 🙂
I have the same kit too. I'm really looking forward to your results. Following. 🙂
13 July, 05:27
Nicolas
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
Welcome Łukasz, there is no reason to be afraid. The fit seams quite good, and the missing details is somthin one can improve. 😉
15 July, 16:33
bughunter
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
The Colani design is cool 👍 Have fun!
And I hope your covid is gone without bad effects!
19 July, 18:39
Nicolas
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
Hi Bughunter, thanks.
Covid wasn't to bad, I got 3 day with mild syntomas and 5 days waiting for a negativ test. 😉
19 July, 19:38
Mr D
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
Done some nice improvements Nicolas... Be worth it, it's good to do this as puts a nice personal touch on it, l need to pick up some card like you have used ( what is it l need to look for ?)
The 2 Revell models l built ...l found the decals took a bit more softening than others models l have done!? the decals said made in Italy....no company name.
Looking good 👍 be nice bright unusual one this 😁
8 August, 19:53
Nicolas
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
Hallo Mr D and thanks.
You can look for plastic sheets and profiles (tubes, chanels, I-beams, etc,) from various manufacturers like AK or Evergreen or use packing material eg. most blisterpacks. 😉
9 August, 05:02
Ian Doody
добавил новый фотоальбом.
добавил новый фотоальбом.
63 изображения
1/32 Trumpeter F4F-4 Wildcat. Новый: 11 August, 18:36 1:32
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point s...
Проект: Grumman F4F-4 Wildcat
6 2 August, 14:09
Ian Doody
Made a start on the 1/32 Trumpeter F4F-4 Wildcat, I'm having my wings permanently folded, this is just all dry fitted so far, I'll add more detail later when the wing is added. No point cleaning up the inside part of the wing of ejection holes, as this will be hidden behind the wing. Think it looks ok so far.
Made a start on the 1/32 Trumpeter F4F-4 Wildcat, I'm having my wings permanently folded, this is just all dry fitted so far, I'll add more detail later when the wing is added. No point cleaning up the inside part of the wing of ejection holes, as this will be hidden behind the wing. Think it looks ok so far.
2 August, 14:11
Ian Doody
So today I've semi painted up the other sides wing root fold system. And started dry fitting the engine. Need to pick a scheme from the Techmod decals at some point, thinking of 1 or 4 so far.
So today I've semi painted up the other sides wing root fold system. And started dry fitting the engine. Need to pick a scheme from the Techmod decals at some point, thinking of 1 or 4 so far.
2 August, 14:19
Ian Doody
Ooh landing gear and engine support structure. Just needs a few touchups, thats it done for now, have to glue it all up straight away, doing it later would be a pain in the ass. Looks ok, I'm no expert on these things. Just for fun build in-between other stuff.
Ooh landing gear and engine support structure. Just needs a few touchups, thats it done for now, have to glue it all up straight away, doing it later would be a pain in the ass. Looks ok, I'm no expert on these things. Just for fun build in-between other stuff.
8 August, 12:51
Ian Doody
I think, as an engine that'll do really, don't need anymore detail on it. Couldn't see it if it was there anyway. I'll paint the rear bank of cylinders, but that's probably it.
I think, as an engine that'll do really, don't need anymore detail on it. Couldn't see it if it was there anyway. I'll paint the rear bank of cylinders, but that's probably it.
9 August, 13:43
Ian Doody
That's all for today, making the most of what you get in the kit, only added bits of wire, no sense going mad with detailing parts you wont see. Prop tomorrow, finish the rear bank of Cylinders, and make a start on the cockpit. Looking nice so far, looks like an engine to me.
That's all for today, making the most of what you get in the kit, only added bits of wire, no sense going mad with detailing parts you wont see. Prop tomorrow, finish the rear bank of Cylinders, and make a start on the cockpit. Looking nice so far, looks like an engine to me.
9 August, 13:43
Ian Doody
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point spending lots of money on a resin engine. Just some wire and a bit of paint.
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point spending lots of money on a resin engine. Just some wire and a bit of paint.
10 August, 14:05
Yannis Trypitsis
Just happened to find this photo in my computer: for sure a conversion set for the T-6 Texan to become a North American A-27, but scale and company are unknown.
Any ideas???
Just happened to find this photo in my computer: for sure a conversion set for the T-6 Texan to become a North American A-27, but scale and company are unknown.
Any ideas???
North American A-27
Unknown 1:x
1 July 2020, 12:10
Michael Keenan
The photo is from a review of the Planet Model/ANTARKI 1/48 North American NA-50 "Peruvian Air Force Fighter"
hyperscale.com/2011/..net238reviewse_1.htm
The photo is from a review of the Planet Model/ANTARKI 1/48 North American NA-50 "Peruvian Air Force Fighter"
hyperscale.com/2011/..net238reviewse_1.htm
11 August, 18:35
ALBERTO ITURBURU HERREROS
хочет
хочет
Anti Javelin grid Conversion set for T-72/T-80/T-90
Balaton Modell 1:35
BM35128 Несколько моделей (2)11 August, 18:35
Mildik
хочет
хочет
Forgotten operations: Magic Carpet 1966-69
DP Casper 1:72
72049 2023 Новая разработка Несколько моделей (10)11 August, 18:35
Piotr Vanat
добавил новый фотоальбом.
добавил новый фотоальбом.
21 30 May, 15:13
Piotr Vanat
Thanks a lot guys.
This old Eduard set has its issues, which I will describe after I finish the model. So far, the main problem was the photo-etched instrument panel, which I mounted a little too far from the seat (or at the wrong angle), because this location suggested the arrangement of other elements in the cabin. As a result, the gunsight stuck to the panel, collided with the canopy. I solved the problem by mounting the sight on a longer piece of plastic, which may give a slightly caricatured effect, but what could I do?
Thanks a lot guys.
This old Eduard set has its issues, which I will describe after I finish the model. So far, the main problem was the photo-etched instrument panel, which I mounted a little too far from the seat (or at the wrong angle), because this location suggested the arrangement of other elements in the cabin. As a result, the gunsight stuck to the panel, collided with the canopy. I solved the problem by mounting the sight on a longer piece of plastic, which may give a slightly caricatured effect, but what could I do?
3 June, 12:19
Duster_d
добавил новый фотоальбом.
добавил новый фотоальбом.
8 изображения
Fokker F-VIIB/3M "Southern Cross" (FROG/NOVO/Zvezda)Новый: 11 August, 17:52 1:72
I applied the decals. The decal from Zvezda has only 8 stars, so the full constellation (out of 5 stars) turned out only...
9 3 August, 12:11
Evan B...
добавил новый фотоальбом.
добавил новый фотоальбом.
13 16 June, 04:28
Nalanjidreaming
владеет этим предметом
владеет этим предметом
Helicopter "Alligator" interior detail set for Zvezda
Microdesign 1:48
MD 048057 2024 Новая разработка 11 August, 18:32
Nalanjidreaming
владеет этим предметом
владеет этим предметом
Russian Helicopter "Alligator" exterior detail set for Zvezda
Microdesign 1:48
MD 048058 2024 Новая разработка 11 August, 18:32
Vincent
добавил новый фотоальбом.
добавил новый фотоальбом.
10 изображения
Mirage 2000N DreammodelНовый: 10 August, 21:26 1:72
I added the seats and the final result looks great.
Проект: Mirage 2000N dream model
6 10 August, 21:24
Cuajete
I got D version this week. I also follow it with interest.
Fantastic job so far!
I got D version this week. I also follow it with interest.
Fantastic job so far!
11 August, 18:31
Nicolas
добавил новый фотоальбом.
добавил новый фотоальбом.
66 изображения
Fallout Diorama - FiguresНовый: 11 August, 18:21 1:35
Started basic painting
Проект: Fallout Diorama
11 20 July, 18:09
Nicolas
I used the good wether today to work on the smaler parts for the Fallout diorama again. The most figures don't fit OOB, so are modified or combinations from different figures from the (up to now 4) figure sets.
I used the good wether today to work on the smaler parts for the Fallout diorama again. The most figures don't fit OOB, so are modified or combinations from different figures from the (up to now 4) figure sets.
20 July, 18:28
Nicolas
Today I started assembling the next 3 figures, including one complete scratch build. I've never done that before, so I'm exited if it works at all.
Today I started assembling the next 3 figures, including one complete scratch build. I've never done that before, so I'm exited if it works at all.
27 July, 19:16
Nicolas
Today I fitted the Rider to the motorcycle. The other figures just recived a little bit of putty.
Today I fitted the Rider to the motorcycle. The other figures just recived a little bit of putty.
28 July, 18:14
Nicolas
I fixed the figures to corks and primed them with Revell 008 Black. Now I can see some small mistakes wich require some attention. The camera dosn't show that to well.
I fixed the figures to corks and primed them with Revell 008 Black. Now I can see some small mistakes wich require some attention. The camera dosn't show that to well.
3 August, 19:24
Nicolas
Hi Erik and Shar, welcome.
@Shar: At the moment I'm thinking about adding 2 more albums, one for infrastructure & buildings and one for the base witch would than include the entire project. For me, this makes the most sense, as I also proceed in the same way when building. The finished figures then go into the display case until I need them in the building or on vehicles, which are then back in the display case until the base is finished. As I use the albums here to keep an overview over the project I find everything faster.
Hi Erik and Shar, welcome.
@Shar: At the moment I'm thinking about adding 2 more albums, one for infrastructure & buildings and one for the base witch would than include the entire project. For me, this makes the most sense, as I also proceed in the same way when building. The finished figures then go into the display case until I need them in the building or on vehicles, which are then back in the display case until the base is finished. As I use the albums here to keep an overview over the project I find everything faster.
4 August, 10:56
Nicolas
In the last week I reworked the seams & the details (1 or 2 figures a day) primed it yesterday Black (Revell Emaile 08) and added some White (Revell 04) ftom above to help with shadows & light.
In the last week I reworked the seams & the details (1 or 2 figures a day) primed it yesterday Black (Revell Emaile 08) and added some White (Revell 04) ftom above to help with shadows & light.
11 August, 07:06
Nicolas
I worked today for nearly 5 h on basic painting of the clothes. As I will probably not use the girl with the crossbow I want to try some things here, but wasn't motivated in the end. Next weekend I want to start with the skin.
I worked today for nearly 5 h on basic painting of the clothes. As I will probably not use the girl with the crossbow I want to try some things here, but wasn't motivated in the end. Next weekend I want to start with the skin.
11 August, 18:28
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo