Новостная лента

Chris T. An
This is the first time for me to tackle a complete resin kit. And when I look at the individual parts, it will be a real challenge. There is an extreme amount of rework needed on each part. Hope I can get it to work.

Finn
Best of luck, it will be interesting to follow

Michael Kohl
I am in too

Robert Podkoński
I will watch with pleasure and interest too.

Alex K
A 3D-printed PZL Dromader???!!! Following for sure!! (The Grand Models cast-resin kit is perhaps above my skills - and I still wait for the Karaya injection one...). Your ag-aircraft & ground equipment dio will turn... monumental! 👍

Marcel Klemmer
Very interesting project👍 I am in

Villiers de Vos
Very nice progress on an unusual subject.

Chris T. An
Thank you all for watching. Alex, I also saw the Grand Models kit for the M18, but I was frightened from some build reviews, there is a lot of rework to do on that kits. I have now the same or a bit more work, but I got the 3D file for free from Thingiverse.

I am really not a Pro in sratch building but I will try to engrave some panel lines and add some more greeblies to the plane. The 3D file is very poor in details.

Alex K
Nice progress! 👍

Robert Podkoński
Fantastic Dromader! (I wish I had one... I have no access to 3d printing, alas...😭 )

Chris T. An
Robert, you can have a look to the Grand Models resin kits. I am much more disappointed that there is no kit in 1:72 and no 3D file of a PZL 106 Kruk. I would spend some money on that because it would fit perfect to the Dromader and Cmelák.

Robert Podkoński
Actually, that is something that makes me angry too - I would love to see (and buy) decent kits of "Wilga" and "Kruk" (not mentioning PZL M-15 "Belphegor" 😉 )... but apparently no Polish manufacturers are interested in preparing these.

Alex K
Guys... let's look a bit at the bright side: who would have thought a few years ago that one day (today!) there would be kits of the Cmelak, the Dromader, the Grumman AgCat (in both 1:72 & 1:48!!!), the Piper Pawnee?! Some are short-run, some are cast-resin, some are 3D-files-to print - nevertheless, something is slowly moving towards that direction! So, yes, I do hope too there will be someday a Kruk available in 1:72 or a Belphegor! And your buys of such kits and your modelling work proves that there's some interest in such topics! Keep it up! 👍

Robert Podkoński
You're right, Alex 🙂 "Always look on the bright side of life..." 😉

Robert Podkoński
I am afraid there is a spelling error on the decals, Chris... I see "Dromedar" instead of "Dromader"... The plane looks awesome!

Chris T. An
Robert, I can understand that it is confusing, but in the GDR, "Dromedar" was actually used. This is the German translation of the word. Feel free to search for pictures of it, here would be an example: [img1]

Robert Podkoński
I have not known about that, sorry Chris... That's really interesting.

Alex K
Nice trivia... and as Robert said: it looks awesome!

Bernhard Schrock
Dromader: An outstanding result from such a simple kit!

Neuling
Everything top notch here! But what about the excavator? May a combined diorama?

Chris T. An
The excavator is still coming. I haven't dared to go any further yet. Let's see, maybe I'll get motivated again in the fall/winter. 😉

Neuling
👍

Michael Kohl
Very well done Dromedar. Anxious about the excavator.

Villiers de Vos
Fantastic work on the crop duster.

Chris T. An
It is not easy to find out with which lettering the excavator was delivered in the color used in the respective year of construction. I'll have to see which decals I print out.

Ben M
What a great project! You got an amazing result with the 3d printed aircraft.

Mark Sherwood
That's excellent, I operate a CAT M3050 Material Handler at work, very similar. Weathering on the grabs are spot on. 🥸👍

Spanjaard
that is looking amazing, and it is not yet finished.....

Landlubber Mike
Wow, nicely done! Do you mind me asking what paints/colors you used for the finish and roof? Looks great!

Also, how did you do the license plate? Looks very clean.

Thanks!

gorby
I think you win this weeks prize for most heavy duty modelling tool. 😄
Looks a very interesting conversion.

Lenny Li
I think that kind of set up can tool a real bogie!!

Neuling
Watching .....................

Jakko ‌
> I think you win this weeks prize for most heavy duty modelling tool. 😄

Probably, yeah 🙂 It's a metalworking lathe, so a bit overkill for just turning down the seam on those wheels, but I didn't feel like aching fingers from scraping them down with a knife — I get those even when I hold them in a modelling vice, never mind just between my fingers.

> that kind of set up can tool a real bogie!!

Having seen a disassembled Sherman bogie up close, I must say I think this one is a size too small for that 😉

Ben M
👀 fascinating vehicle.

Mr D
Looking good, weld's coming on nice 👍

Ben M
How did you hold the wheels in the lathe?

Jakko ‌
@Mr D: that's not the welds yet, it's just the filler needed to plug the gaps 🙁 I'm still debating how to add all the weld seams.

@Ben M: An M2 screw, about 2 cm long, through the hole in the wheel, with a nut to tighten it. It needs to be fairly tight else chances are the wheel will stop as soon as the chisel hits it. On Asuka two-piece wheels, you need to do this before assembling the parts, because the hole on the piece to be glued in is smaller than on the part that has the tyre moulded on it.

Ben M
Thank you, I can envision the setup. I have a small lathe and arthritis in my hands, this technique could help me a lot. Thanks!

Mr D
Regarding weld's l have seen super glue used through a fine tip, you need steady hand n move in pattern to create weld.
Sorry l was looking at the resin 🤔🤣.
Good stuff be keeping eye
On progress 👍👍

Jakko ‌
@Ben M: What also works is a modeller's vice. Clamp the wheel in that, scrape down the seam with a straight knife over a third or so of the wheel, then unclamp and turn it, and repeat. If I scrape more than about two or three wheels by hand, my fingers ache enough that I have to stop, so the vice helps a lot. But you also get a lot of plastic scrapings all over your modelling area, so this time, I figured I'd put those in someone else's hobby room instead for a change 😉

@Mr D: Hahaha! The ones on the resin were put there by Resicast 🙂 But I'll now have to make ones that look similar, or at least not out of place next to them. I'm thinking a thin string of two-part epoxy, textured with a sharp tool.

gorby
I've just seen an Uncle Nightshift vid on adding weld seams:
Youtube Video

Jakko ‌
Thanks for that.

Mr D
Good video 👍, the finish on the flat plate work looks authentic, l think it's had better rough cast look from the brush stippling before he added the putty coat.
Good idea on the weld , epoxy putty best as regular epoxy levels out again.

Jakko ‌
I've begun to add the weld seams now — see photo 23 🙂 Basically, Magic Sculp two-part epoxy putty that I mixed up a very small amount of, then took even smaller amounts from that and rolled it as thin as I could in my hand before pressing it into the join between the parts. Getting it to stick there is tricky, especially once I began texturing it with the tip of a knife — it wants to adhere to skin and steel much better than to plastic, unfortunately 🙁 But with a bit of perseverance it does eventually stick.

Pietro De Angelis
Fantastic work, congrats!

David Taylor
really coming along.

Jakko ‌
Thanks 🙂

Robert Podkoński
I see some heavy duty equipment here and a lot of elbow grease... Good job so far, Jakko! Keep it up!

Jakko ‌
Thanks, though this is fairly straightforward. The most difficult part was finding a good way to curve the splash plates, really.

Pepe
Looking

gorby
You're doing some excellent work on this.

Jakko ‌
Thanks 🙂

Guy Rump
Looking great, following. 👍

Jakko ‌
Cool, nice to have you along 🙂

Mr D
Taking shape now, the green welding joints are looking a better medium.
Interesting to see an adaptation taking place of the original.
Thanks for your posts, good to see steps
👍👍👍

Jakko ‌
Thanks. TBH, I don't really care to look at photos of finished models — I much prefer seeing how they got to be that way, after which the finished pics make sense 🙂 So I post in-progress photos instead of only what it looks like at the end.

Ben M
Looks great, what an interesting subject. I enjoy your in progress photos.

My favorite bit is the martini glass holder up there on the bridge.

Mr D
Hi Jakko👋
Very nice... great job, thanks for the uploads....be interesting to watch progress.
Like it 😁👍👍

Robert Podkoński
Great job, Jakko! You're a master!

Jakko ‌
Thanks, guys 🙂

> I enjoy your in progress photos.

Speaking for myself, I much prefer looking at how a model was built, than how it looks when it's finished 🙂

> My favorite bit is the martini glass holder up there on the bridge.

I take it you mean the No. 19 set 'B' aerial …

David Taylor
Brill.

Jakko ‌
Thanks 🙂

Guy Rump
Great job! 👍

Jakko ‌
Thank you too 🙂

Ben M
Wow, that took a lot of work. Great result, and such an interesting vehicle. I wonder how many of these conversion kits actually get built!

Mr D
Brilliant 👌 Well done a nice custom model 👍👍
All the work paid off now 👍👍

Jakko ‌
Thanks 🙂 It did take a good while, but I'm pretty happy with how it came out. And I agree with Ben, you have to wonder how many people actually build extensive resin conversion kits these days … they're definitely not for the modeller who just wants to put the parts together.

FWIW, I also have Resicast's Sherman V DD and Terrapin (both complete kits) in my stash, which will probably be even more work 🙂

Ben M
I've looked at an m33 conversion for an m3 along with a resin gun to go behind it but honestly builds like this convince me to save my money; I'm not likely to ever build it and it'd just sit in my stash. I like to spend money on things I'll actually build.

I can just vicariously enjoy builds like this! I also really enjoyed your CDL build, all the corrections you did to it were really amazing. I like how deeply you research these things.

Jakko ‌
Yes, an M33 would be a pretty intensive build, I would imagine 🙂 TBH, Resicast is probably one of the better "traditional" conversion-kit brands you could go for, but if you can't actually see yourself starting it at all then I agree it's just better to leave it. The main reason I had the BARV kit (and the Terrapin, DD, and some others) is because Resicast was going to close last year, and I don't see any plastic kits of any of these coming out in my lifetime …

As for research: I just want to build a model that's fairly accurate, and when the manufacturer gets it clearly wrong, I try and correct the kit 🙂 That's basically what lead to the detailling added to this model, but also the CDL modifications, adding a FULL set of deep-wading gear to a Churchill, etc. I couldn't have done any of these without being able to ask other people online about things I couldn't discover or work out on my own, though.

Clement
Nicely done, the weathering is spot on!

Neuling
I agree!

Mr James
Lovely colour painting weathered just right

Guy Rump
Missed this before, great result, congrats! 👍

Spanjaard
very nice result in the melted muuffler

Stefan L.
@Spanjaard thank you, I hope to achieve some nice rust variations at those dented spots

Spanjaard
I am sure you will 🙂

Doubtingmango
Great narrative! Watching

Stefan L.
@Doubtingmango thank's alot, appreciate it!

John
You're doing a good job of adding all the details that Tamiya kits of this era lack. 👍

Stefan L.
@John thank you, im trying my best! 🙂

Alex Rakhimgulov
Very interesting and useful tips under each picture! Thank you! Really cool build!

Stefan L.
@Alex Rakhimgulov thank you alot for this comment! Appreciate it that you find those tips useful 🙂

Guy Rump
Following with interest. 👍

Stefan L.
@Guy Rump sure, feel welcome! 🙂

Rui S
Nicelly detailed 👍 I'm in 😎

Stefan L.
@Rui S thank you, feel welcome! 🙂

Andor Tóth
Cool build! It was my very first 1/35 vehicle I built back in 1995 or so (at the age of 15). So nostalgic.

Frédéric Poupon
Fantastic work on this oldies! Great job.

Stefan L.
@Andor Tóth oh wow, what a coincidence, hope you will like the end-result! 🙂

Stefan L.
@Frédéric Poupon thank you, trying my best! 🙂

Pepe
Nice job

Martin Oostrom
Another fine fire department truck

Goldman
Great looking model. Beautiful paint job.

Curtis Caden
Thank you Pepe, Martin Oostrom and Goldman. My only wish is that directions would show pictures of how the part looks after it is attached. Too many arrows pointing in a direction and not even showing which way the part should be flipped. I am convinced that to build a model correctly one should do two of them. One to learn on and one to have for a nice, finished product. I tell myself that I build it because I like the subject matter, and it is only a representation. I felt bad that I couldn't align the white decal stripes better.

David Orr
Very nice work Curtis. Looks like an absolute beast. How did the kit go together? I've got an AMT Kenworth Alaskan Hauler in the stash which I'm hoping to build soon. That will be my first truck model.

Villiers de Vos
Flawless.

Neuling
Beautiful!

Christian W
That truck looks really nice! Flawless pauntjob. This is what I like 🙂

Curtis Caden
David Orr the truck part went together fine. The wrecker part that sits on the frame was a bit awkward. There were two options for the hooking part that led to some confusion on my part. I liked having the long cable but having it molded in plastic was not ideal and I probably should have substituted a fabric rope cable. I did like the way the mirrors in this kit were molded.

Curtis Caden
Thank you, Villiers de Vos, Neuling and Christian W.

Bozzer
Did you have any issues with the hood alignment, Curtis?

Bill Newcomer
That is nice looking rig. I like the shape of the hood.

Curtis Caden
Italeri doesn't mold their cabs like other companies, and I did have trouble with Opal Blitz Classic cab assembly. On this one the hood lined up just right. Hood alignment has only been a problem on the Ford Louisville Series Delivery Van. If you like the hood you would also like Italeri's Classic Western Star 4964 and Australian Truck.

Bozzer
I had hood issues with mine. I couldn't figure out what had happened? It was like the hood, or cab, was twisted? Just wondered if you had a work around.

Curtis Caden
Bozzer I had no work around. I find positioning with tape helps. I usually tape the hood to the cab for painting and use tape to hold parts in position until they dry. I used tape for the hood on this one. I think I was just fortunate. My usual problem is getting a twist in the ladder style frame and all I know to do is be more careful.

Bozzer
Always check your frame rails, against a flat surface, before starting. Gentle heat from a hairdryer, will help straighten the frame. (Special note: The Mack R685ST kit has a frame that flares out at the front, DON'T correct it!)
To keep my frame square, I build a jig out of Lego and use that to line everything up.
I'll get back to this Western Star, in the coming months, and take another look at it. I may have missed something obvious, that I overlooked? She's been waiting far too long now, to be finished.

Martin Oostrom
I've been building the Australian Truck on and off for five years now. It won't get right.

Bozzer
I feel that pain too, Martin

Guy Rump
Looking good, following. 👍

Harald Besold
Thank you Guy for your interest in my project.

Zbynek Honzik
Nice! I'm taking a seat. 👍

Harald Besold
Hello Zbyněk,
thank you very much for your interest in my project.

Robert Podkoński
Great job so far, Harald. Keep it up!

Harald Besold
Thank you Robert!

John Thomas
Nice work

Guy Rump
Lovely job! 👍

J35J
Great work!👍🏻