Новостная лента
TH SCALE MODELS (Thomas Haberl)
добавил новый фотоальбом.
добавил новый фотоальбом.
17 изображения
EDUARD FW190A-8/R2 FULL BUILD SINGLE STEPSНовый: 8 July, 17:32 1:72
Проект: EDUARD FW190A8/R2
49 21 February, 19:34
TH SCALE MODELS (Thomas Haberl)
Welcome and thanks for your motivating words @Alec . First time I use something 3D printed and until now I enjoy it ☺️
Welcome and thanks for your motivating words @Alec . First time I use something 3D printed and until now I enjoy it ☺️
25 February, 16:41
TH SCALE MODELS (Thomas Haberl)
Welcome @Nicolas, @ Rui and @DerMattes - thanks for your interest in this build 😊
Welcome @Nicolas, @ Rui and @DerMattes - thanks for your interest in this build 😊
26 February, 14:59
TH SCALE MODELS (Thomas Haberl)
A small update here ... engine took my a while to get fitted in the fuselage. Didn´t work precisely enough so I got paid off when I tried to put the engine in. Anyway I solved it somehow without any major visible impact.
A small update here ... engine took my a while to get fitted in the fuselage. Didn´t work precisely enough so I got paid off when I tried to put the engine in. Anyway I solved it somehow without any major visible impact.
11 March, 20:42
Rui
I gotta. say that I really appreciated there build posts that people share; its a real treat to see a bunch of plastic and such come together into a masterpiece! I learn so much from watchings.
I gotta. say that I really appreciated there build posts that people share; its a real treat to see a bunch of plastic and such come together into a masterpiece! I learn so much from watchings.
11 March, 23:46
TH SCALE MODELS (Thomas Haberl)
Welcome @Skyhiker - thanks for your interest on this build @Rui thanks for your kind words, even if I don´t think that anybody can learn much from my work .... but this is exactly what this stunning community is for ... I learned so much from people´s builds here ...
Welcome @Skyhiker - thanks for your interest on this build @Rui thanks for your kind words, even if I don´t think that anybody can learn much from my work .... but this is exactly what this stunning community is for ... I learned so much from people´s builds here ...
12 March, 08:09
Alec K
Glad you solved the hurdle. Any ideas why the engine did not fit, or what the issue was?
Glad you solved the hurdle. Any ideas why the engine did not fit, or what the issue was?
12 March, 12:37
Bruce Huxtable
1:72? I would have trouble with those tiny PE part of it were 1:32!! Well done on your precise work.
1:72? I would have trouble with those tiny PE part of it were 1:32!! Well done on your precise work.
12 March, 13:04
J35J
Great work Thomas!
Really impressed of your clean build and how you apply thiny amount of glue on all delicate small PE parts without creating a mess.
Great work Thomas!
Really impressed of your clean build and how you apply thiny amount of glue on all delicate small PE parts without creating a mess.
12 March, 13:16
TH SCALE MODELS (Thomas Haberl)
thank you all for your kind words - I really appreciate that and this motivates me to constantly push myself out of the comfort zone .... thanks thanks thanks!!!! @Neuling: I know your skills so I´m really glad you came around my build: the answer is patience and a glass of good wine 😆 @Alec: as you can see the engine comes in a lot of tine parts and I didn´t pay enough attention when removing the print support and grinding the parts down properly. This resulted in a too long engine assembly. Lucky my I always spend a lot of time on dry-fits so I recognized it before starting to glue it in. Almost complete front end is made of printed parts and slightest deviations result that engine cowlings won´t fit together. Not a must to have them completely align when you show them open but I want to paint the all in one and then open the cowlings once done ...
thank you all for your kind words - I really appreciate that and this motivates me to constantly push myself out of the comfort zone .... thanks thanks thanks!!!! @Neuling: I know your skills so I´m really glad you came around my build: the answer is patience and a glass of good wine 😆 @Alec: as you can see the engine comes in a lot of tine parts and I didn´t pay enough attention when removing the print support and grinding the parts down properly. This resulted in a too long engine assembly. Lucky my I always spend a lot of time on dry-fits so I recognized it before starting to glue it in. Almost complete front end is made of printed parts and slightest deviations result that engine cowlings won´t fit together. Not a must to have them completely align when you show them open but I want to paint the all in one and then open the cowlings once done ...
12 March, 17:59
TH SCALE MODELS (Thomas Haberl)
@Neuling … who drinks beer in glasses? 😂 but I guess it will work
@Neuling … who drinks beer in glasses? 😂 but I guess it will work
12 March, 21:02
Trez Mackenzie
What was the cause of engine fitting? I have just got the engine pack. Any advice?
Ah, I read your previous post. It seems that most folk seem to buy these things as an aesthetic object so hats off for taking this on!
What was the cause of engine fitting? I have just got the engine pack. Any advice?
Ah, I read your previous post. It seems that most folk seem to buy these things as an aesthetic object so hats off for taking this on!
4 April, 15:39
TH SCALE MODELS (Thomas Haberl)
@Trez: as you may have seen in previous comments, the most important thing is to really carefully sand all components down. Tend to say do a little more. There are many components coming together (assembled engine itself, manually modified fuselage, printed cowlings, ... ) and should fit properly in the end to avoid any gaps or twists in the final assembly. I think it would be tricky even in bigger scale. 1/72 scale has no mercy in this complex assembly of the plane front end. I managed it, but didn´t upload any pictures here so stay tuned 😊
@Trez: as you may have seen in previous comments, the most important thing is to really carefully sand all components down. Tend to say do a little more. There are many components coming together (assembled engine itself, manually modified fuselage, printed cowlings, ... ) and should fit properly in the end to avoid any gaps or twists in the final assembly. I think it would be tricky even in bigger scale. 1/72 scale has no mercy in this complex assembly of the plane front end. I managed it, but didn´t upload any pictures here so stay tuned 😊
5 April, 06:28
Sergej I
Following! 👍, great job with cockpit and engine so far.
I have the exact same setup for an F-8 Würger in the shelf 🙂
Following! 👍, great job with cockpit and engine so far.
I have the exact same setup for an F-8 Würger in the shelf 🙂
5 April, 06:38
TH SCALE MODELS (Thomas Haberl)
@Trez: I will share some when I´m back - currently traveling and far away from my bench. @Sergej: thanks for your positive feedback, I hope my experiences on this build help to make yours a little bit more straight forward 😆
@Trez: I will share some when I´m back - currently traveling and far away from my bench. @Sergej: thanks for your positive feedback, I hope my experiences on this build help to make yours a little bit more straight forward 😆
5 April, 17:28
TH SCALE MODELS (Thomas Haberl)
After a longer break on this I was finally able to restart on this build. Main engine components placed in fuselage, rivets added (as much as possible on this scale) and hydraulic tubes adde to landing gear. Now a bit of tedious work ... sanding and preparation for primer. Not much but in tricky places.
After a longer break on this I was finally able to restart on this build. Main engine components placed in fuselage, rivets added (as much as possible on this scale) and hydraulic tubes adde to landing gear. Now a bit of tedious work ... sanding and preparation for primer. Not much but in tricky places.
25 June, 19:39
Frank Brzobohaty
Great job, not the easiest in 1:72 scale is it Thomas? but it is rewarding when completed!
Great job, not the easiest in 1:72 scale is it Thomas? but it is rewarding when completed!
26 June, 16:21
TH SCALE MODELS (Thomas Haberl)
Thanks @Frank!! Indeed it was a challange, especially when working with these resin parts for the first time. But as you say, I hope it will be rewarding once the Würger is done 🤷♂️
Thanks @Frank!! Indeed it was a challange, especially when working with these resin parts for the first time. But as you say, I hope it will be rewarding once the Würger is done 🤷♂️
26 June, 18:03
Jason Marson
добавил новый фотоальбом.
добавил новый фотоальбом.
8 29 June, 23:32
Jason Marson
Thanks Alberto. There's a few corrections to be made as the masks are not 100% accurate but overall I'm pleased with the result.
Thanks Alberto. There's a few corrections to be made as the masks are not 100% accurate but overall I'm pleased with the result.
30 June, 11:36
Random Penguin
добавил новый фотоальбом.
добавил новый фотоальбом.
24 изображения
WIP - Terminator SquadНовый: 8 July, 17:30 28mm
New multipart kit has new big sheet of decals - which is good.... until it is not. You don`t have space shoulder marks f...
2 8 July, 14:06
Fred van der Haak
владеет этим предметом
владеет этим предметом
Fi 103 Reichenberg IV & Ba 349A Natter
Heller Humbrol 1:72
80226 1982 Новая коробка Несколько моделей (2)8 July, 17:28
Neil
добавил новый фотоальбом.
добавил новый фотоальбом.
28 изображения
Italeri | No. 2703 | 1:48 | Republic F-84F Thunderstreak "i Diavoli Rossi" (WIP)Новый: 8 July, 11:25 1:48
WORK IN PROGRESS. UPDATED: 8/7/24...
Проект: Republic F-84F Thunderstreak
37 1 February 2023, 11:58
Stefan Fraundorfer
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
I'll take a close look at your model. I have the same one in my stash and would like to build it myself in the near future. Have fun Neil!
5 December 2023, 16:09
Mark Sherwood
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
Parked the 360, watching. You should have prolific as your middle name, the amount of builds dude. It would make me more confused than I am. Hurrichurchspitwell anyone. 🤟😵💫🤘😵💫🖖😵💫👍🤣🥸
12 December 2023, 08:01
Neil
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
Wow! Welcome all. Really great to have interest from such a talented bunch of fellow modellers. @stephan, looking forward to your version very much also 👍👍 @mark, I know, I'm a bit nuts! I love having lots of the go, takes a while to complete and I'm useless at doing reveal photos. But it keeps it all fresh for me! My job is all about multiple projects, so similar state of mind! 😂
6 January, 11:14
John
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
I do NOT envy you your masking job but it should look amazing when you finish (or run out of tape). 👍
9 February, 16:31
Neil
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
Hi John, thanks for your interest mate. I should be ok tbh as the kit comes with a superdecal (cheat) sheet! So although there's some stressful masking on a metallic finish, it's hopefully all doable 👍 I've added some more images today. Thanks for your likes also to all who've dropped by too 🙂
14 February, 20:54
Donald Dickson II
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
I did this one as well. Those decals are actually pretty good.
I tried acrylic metallics for the first and last time on this one. When I removed the masking for the red, it pulled EVERYTHING, primer included, right up. The finish was awesome until then. Alclad and Metalizer for me from there out.
Diavoli Rossi F-84 | Album by smokeriderdon (1:48)
8 July, 15:14
Neil
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
Hi J35J - thanks very much 👍 🙂
Hi Donald, Yes, I agree, the kit decals are nice - though they are on the thicker side. On application they hide a lot of the kits surface detail in my opinion. However subsequent passes with more (and more!) softening and setting solution is doing them justice - more pictures to follow. Sorry to hear of your paint issues when building. Yes. My version is painted solely with Vallejo acrylics: Vallejo primer, Vallejo colour and Metal Colour 👍 You rescued your version well, looks good 🙂
8 July, 15:45
Donald Dickson II
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
Thank you. In person you can see the areas that pulled fairly clearly.
I used Solvaset on the decals. That managed to get them to settle down fairly well. But yeah, it did hide a bit. BUT, i liked the thickness as those large ones required a good bit of fiddling to get where they needed to be and they stood up to the handling perfectly.
8 July, 17:28
J35J
добавил новый фотоальбом.
добавил новый фотоальбом.
59 7 December 2023, 18:57
Rando
Had no idea that they made a carrier borne Mosquito til I saw this project, lots of interesting and unique features to include here
Had no idea that they made a carrier borne Mosquito til I saw this project, lots of interesting and unique features to include here
19 December 2023, 23:44
J35J
@Rando - Thanks for your intrest, indeed it is a quite unique bird.
Derived from the Mosquito the Sea Mosquito was intended to be used aboard the Fleet Air Arm's aircraft carriers. During its time in service it would only be used by land based squadrons. Two variants of the de Havilland Sea Mosquito were built and only 67 was produced.
@Rando - Thanks for your intrest, indeed it is a quite unique bird.
Derived from the Mosquito the Sea Mosquito was intended to be used aboard the Fleet Air Arm's aircraft carriers. During its time in service it would only be used by land based squadrons. Two variants of the de Havilland Sea Mosquito were built and only 67 was produced.
21 December 2023, 16:23
Andy Ball
well, this version I haven't heard of, so I'll crane my neck over yours...
well, this version I haven't heard of, so I'll crane my neck over yours...
10 January, 19:40
Łukasz Gliński
Seems quite a logical idea - staying afloat in case of ditching into the sea 😄
Seems quite a logical idea - staying afloat in case of ditching into the sea 😄
10 January, 19:46
Bernd Grün
Very nice project. It turns out very well. 👍 Didn't know anything about Sea Mosquitos.
Very nice project. It turns out very well. 👍 Didn't know anything about Sea Mosquitos.
15 March, 14:22
J35J
Thanks mates for your intrest and kind comments. The project is slowly moving forward. Waiting for some photo etch parts.
Thanks mates for your intrest and kind comments. The project is slowly moving forward. Waiting for some photo etch parts.
15 March, 19:45
J35J
Thanks David & Rando for you comments. Much appreciated👍🏻
Paint job and a light weathering in progress. Need to crack on with the decals in next phase before getting the folded wings in place.
Thanks David & Rando for you comments. Much appreciated👍🏻
Paint job and a light weathering in progress. Need to crack on with the decals in next phase before getting the folded wings in place.
21 June, 09:18
Robert Podkoński
Somehow I missed this project before... And I have never heard about Sea Mossie up to now... Great job so far - keep it up!
Somehow I missed this project before... And I have never heard about Sea Mossie up to now... Great job so far - keep it up!
28 June, 18:59
J35J
Thanks BC NRA for your kind comments. Yes, the Sea Mosquito was a rare bird. Always fun to research & build the more odd versions.
Thanks BC NRA for your kind comments. Yes, the Sea Mosquito was a rare bird. Always fun to research & build the more odd versions.
1 July, 20:29
J35J
Thanks Thomas for your kind comments.
Just realized going for the final photos that I missed the wind shield wiper for the front screen. Details, details…🙈😅
Thanks Thomas for your kind comments.
Just realized going for the final photos that I missed the wind shield wiper for the front screen. Details, details…🙈😅
7 July, 20:12
Łukasz Gliński
Very cool. Wish I could get that conversion set. The nose pimple is just a cherry on the cake 😄
Very cool. Wish I could get that conversion set. The nose pimple is just a cherry on the cake 😄
8 July, 09:42
J35J
Thanks Villiers de Vos & Lukasz Gliński for your intrest and kind comments!👍🏻
@ Lukasz Gliński - you can find a conversion kit here:
blackbirdmodels.co.u..ersion-72-2642-p.asp
Thanks Villiers de Vos & Lukasz Gliński for your intrest and kind comments!👍🏻
@ Lukasz Gliński - you can find a conversion kit here:
blackbirdmodels.co.u..ersion-72-2642-p.asp
8 July, 15:41
Deon
хочет
хочет
AZP S-60 Soviet AA Cannon (lovered)
Military Scales (IDAP Technology) 1:72
PMI165.1B 2024 Новые детали 8 July, 17:23
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo