Новостная лента
![](/profiles/img/10148-258-s.jpg)
добавил новый фотоальбом.
3 5 August, 12:53
![](/profiles/img/10148-258-s.jpg)
I would like to realise two of the three markings from the kit, one of which is an F.13 celebrity of the first hour: "Annelise" (without the long "I") 🙂
The first round of the build is currently progressing without any problems... although I am already aware of some fitting difficulties! I enjoyed the seating: open air in the front and the fight for survival, in the good little parlour in the back, old-school leather interior and a ticking wall clock while sipping tea!
5 August, 13:00
![](/profiles/img/15936-533-s.jpg)
As always, Roland looks very good up to here. How is the fit of the wing trailing edges?
5 August, 13:55
![](/profiles/img/10148-258-s.jpg)
Thank you both very much! Dieter for your kind reply, I can't say yet, as I'm still busy assembling the hull - but I'll keep you and you up to date!
5 August, 15:49
![](/profiles/img/10148-258-s.jpg)
The construction of the two Junkers machines is progressing! The nice thing is that the sanding of the glued seams on the fuselage and surfaces will be very limited, at least where corrugated sheet metal edge meets corrugated sheet metal edge. But their " grooves" have to be well continued - also quite entertaining!
Here you can see the whole unvarnished truth of a freshly glued raw state: nothing has been cleaned up yet, just the worst areas have been filled or filled with plastic card.
9 August, 07:24
![](/profiles/img/10148-258-s.jpg)
добавил новый проект.
1 25 October 2023, 08:44
![](/profiles/img/10148-258-s.jpg)
The construction of the two Junkers machines is progressing! The nice thing is that the sanding of the glued seams on the fuselage and surfaces will be very limited, at least where corrugated sheet metal edge meets corrugated sheet metal edge. But their " grooves" have to be well continued - also quite entertaining!
Here you can see the whole unvarnished truth of a freshly glued raw state: nothing has been cleaned up yet, just the worst areas have been filled or filled with plastic card.
9 August, 07:23
![](/profiles/img/52657-733-s.jpg)
владеет этим предметом
![1:72 P-51B/C Mustang (Ministry of Small Aircraft Production 7212) 7212](/products/img/7/6/5/1010765-24401-83-t180.jpg)
P-51B/C Mustang
Ministry of Small Aircraft Production (MSAP) 1:72
7212 9 August, 07:21
![](/profiles/img/10148-258-s.jpg)
добавил новый фотоальбом.
9 August, 07:14
![](/profiles/img/10148-258-s.jpg)
In view of the start of this build, I was tempted by the following motto: "From ugly duckling to swan": the kit offers a number of interesting challenges, but gives an idea of the potential both as a model and as a representation of a true aircraft beauty! I will try my best to make the swan appear....
A first challenge: roughly moulded parts, poor fit and a wing that wants too much in a positive V-position.... A second challenge will follow in the form of a Vacu canopy that has turned yellow with age; this will give me the opportunity to try out the doing in Vac-canopy myself. More of that next time...
9 August, 07:18
![](/profiles/img/52657-733-s.jpg)
владеет этим предметом
![1:200 Air Canada Boeing 727 1:200 (Hasegawa : SI (Shaben Int'l) NTL-H-8) NTL-H-8](/products/img/4/9/5/1461495-24595-63-t180.jpg)
Air Canada Boeing 727 1:200
Hasegawa : SI (Shaben Int'l) 1:200
NTL-H-8 9 August, 07:16
![](/profiles/img/116182-550-s.jpg)
владеет этим предметом
![1:35 V-2 Rocket Meillerwagen Hanomag SS100 (Takom 2030) 2030](/products/img/8/3/4/1015834-21503-67-t180.jpg)
V-2 Rocket Meillerwagen Hanomag SS100 WWII German V-2 Rocket Transporter/Erector
Takom 1:35
2030 2016 Модельный набор 9 August, 07:16
![](/profiles/img/116182-550-s.jpg)
владеет этим предметом
![1:35 V-2 Rocket Meillerwagen Hanomag SS100 (Takom 2030) 2030](/products/img/8/3/4/1015834-21503-67-t180.jpg)
V-2 Rocket Meillerwagen Hanomag SS100 WWII German V-2 Rocket Transporter/Erector
Takom 1:35
2030 2016 Модельный набор 9 August, 07:13
![](/profiles/img/11807-s.jpg)
добавил новый фотоальбом.
54 изображения
A-6A Intruder Trumpeter ![View album, image #53 View album, image #53](/albums/img/1/9/2/1782192-11807-29-720.jpg)
1:72
Проект: A-6A INTRUDER VMA(AW)-242 BATMEN
118 19 May, 16:00
![](/profiles/img/18052-335-s.jpg)
Nice start👍. Looking forward to your build. I´am curious to see the pros and cons of the kit.
24 May, 09:05
![](/profiles/img/15941-384-s.jpg)
I didn't dare to cut main weels bays, I just swore loudly at Trumpeter)
And there are some other remakes need to be done to make "A' from this model...
24 May, 13:25
![](/profiles/img/11807-s.jpg)
Many thanks , mates 😉
For those who wish to assemble this model, it will be necessary to plan a little surgery on the main landing gear bays.
Other than that, I will say that the kit is better than Italeri or Fujimi but that's just my opinion. The level of detail is much higher than the other two
24 May, 15:19
![](/profiles/img/11807-s.jpg)
Maybe a little more information about the different versions of A-6 :
tailspintopics.blogs..-vs-6e-intruder.html
24 May, 15:25
![](/profiles/img/10307-421-s.jpg)
Jaw dropping detailing -as usally! All looks so easy and still perfectly clean and we all know how hard this is (especially in 72) - great job!
31 May, 15:51
![](/profiles/img/11807-s.jpg)
Many thanks,
For the moment, I don't find any difficulty in building this kit.
I only used putty in the air intakes, the fitting is quite good
31 May, 19:11
![](/profiles/img/11807-s.jpg)
Thanks Alek 😉
Dearest readers,
For those who would like to build this model but are not happy about having to open the gear hatches, you should know that these famous hatches can be closed on the ground. Yesterday, I found a photo which attests to the thing in the book "lock on" by Verlinden. These hatches are closed manually by the ground mechanics during a prolonged stop of the plane, a sort of storage, this avoids FOD. Of course, this is very rare, but nevertheless it is possible. Also, it's up to you 😉
10 June, 17:42
![](/profiles/img/25429-812-s.png)
Thanks for the encouragement Ronan! Let's have a look at references then. ☺️👍🏼
10 June, 18:29
![](/profiles/img/46074-728-s.jpg)
A tadpole I can see. But at least it's not a FROG or you would have your work cut out for you. 😉
23 July, 12:56
![](/profiles/img/48545-484-s.jpg)
Beautiful work so far, especially love the paint scheme with tan nose - that's what I'd like to build as well. I found some pictures with the "NE" on tail in the same paint scheme, so hope to avoid aftermarket decals. Just got the same kit, so have to follow this thread 🙂
Is the "Hobbyboss" in the album title a joke or a mistake?
23 July, 14:32
![](/profiles/img/21096-573-s.jpg)
it simply looks magnificent. what a wonderful added detail and paint job.... wow.....
27 July, 07:59
![](/profiles/img/11807-s.jpg)
Many thanks, mates 😉
Trumpeter's decals are very crude, especially the lettering. The roundels are all the same size while in reality the wing roundels are larger than those on the fuselage. If you can, get the KA-6D intruder decals from Italeri which are printed by Cartograf.
29 July, 07:51
![](/profiles/img/12962-s.jpg)
Salut Ronan, il est magnifique et le résultat va encore une fois être incroyable 🙂
3 August, 18:43
![](/profiles/img/11836-205-s.jpg)
Great job Ronan! 👍 What would you say, a comparson between the Trumpeter and the old Italeri kit?
6 August, 14:04
![](/profiles/img/11807-s.jpg)
Many thanks,mates 👍
@Harry : i would Say that neither is perfect. The Trumpeter one is much detailled but the italeri IS not so Bad . I would say you need a box of each to make a nice intruder. From Italeri you Can get the decals, the wheels, the main Gear doors, the ordonnance...
That's why i bought two New italeri intruders 😂
6 August, 16:41
![](/profiles/img/user-s.jpg)
I am starting to like the Intruder and I definitely like your model of it.
7 August, 10:14
![](/profiles/img/57594-145-s.jpg)
That looks spectacular! I really like the folded wings! And the painting with that careful weathering is beautifully done. I wouldn't have been surprised if it was 1:48.
8 August, 13:29
![](/profiles/img/108002-516-s.jpg)
This level of detail and paint quality in 1/72, Bravo. Hoping my 1/48 turns out this well.
8 August, 16:41
![](/profiles/img/10148-258-s.jpg)
добавил новый фотоальбом.
22 25 July, 08:02
![](/profiles/img/10148-258-s.jpg)
These pictures start a build that gives me my first experience with 'Clear Prop' - and they are good ones! The fineness of the shapes, the accuracy of fit and the meaningfulness of the construction steps seem to combine to create a pleasurable building experience!
This plane is also highly interesting: originally derived as a drone for shooting practice from a small civilian predecessor model, hundreds were pulverised in the air. Some of those that survived this use went on to have an amazing career as light sports aircraft and enjoyed great popularity in the 1940s.
25 July, 08:08
![](/profiles/img/21997-347-s.jpg)
Oh, a brand new kit?
It is hard to keep track all your parallel running builds! You speed of building all those birds is simply unbelievable and a great mystery to me!
25 July, 11:44
![](/profiles/img/48972-166-s.jpg)
I have the same impressions as Bughunter, frankly speaking 🙂 Following this build for sure.
25 July, 13:00
![](/profiles/img/10148-258-s.jpg)
Hello mates! How nice that this small but lovely project has your interest and positive feedback! Indeed, a brand new kit that immediately caught my interest when I stumbled across it - so it ended up on the workbench straight away.
To answer the question about the current density of my projects: on the one hand, I sometimes wonder myself 🙂 On the other hand, I suspect that it has something to do with running three or four, maybe even five (at the moment, for example) projects in parallel . Something is 'always' being finished or started.
26 July, 14:32
![](/profiles/img/10148-258-s.jpg)
I made the following preparations for the bright red of the final surface: first I applied yellow followed by a layer of white to the model. After drying, I sanded this base, which should make the following red "glow", with 1000, 1200 and 2000 grit sandpaper to make the colour layers more transparent again, to get a smooth surface and to find any flaws - you can see a few exposed on the fuselage and tail unit. I am surprised by the very high quality of the kit and look forward to finishing it!
2 August, 19:30
![](/profiles/img/10148-258-s.jpg)
It looks like the Culver PQ-14 is ready! This was a most enjoyable project from start to finish. I am delighted with my first "clear prop" kit and I enjoyed the unusual history of the original. I made the seat belts and the aerial wiring, everything else can be found in the beautifully finished kit.
Thank you for your interest and your helpful and motivating comments!
7 August, 19:03
![](/profiles/img/44957-709-s.jpg)
Beautiful! Great work as always... 👍 And also: thanks for showing this - it gave me the opportunity to revisit Culver's lineage: the Culver Dart, Cadet, Model V... the role played by Al Mooney... the PQ drones... Lovely!
8 August, 15:24
![](/profiles/img/10148-258-s.jpg)
Thank you for your motivating comments and your interest in a not often seen aircraft, mates! Alex, your list was an inspiration for me to have a look - and to find some interesting aircraft and interesting references - Culver: an amazing manufacturer! thanks!
9 August, 07:09
![](/profiles/img/91911-927-s.jpg)
владеет этим предметом
![The Battle of Britain: Aircrew from Australia (Busybird Publishing ) The Battle of Britain: Aircrew from Australia (Busybird Publishing )](/books/img/8/7/7/141877-10105-12-t180.jpg)
The Battle of Britain: Aircrew from Australia Their Aircraft and a Modeller's Guide
Peter Roberts
2024 9 August, 07:07
![](/profiles/img/91911-927-s.jpg)
владеет этим предметом
![1:35 VIETNAM War Australian Army Infantry & M113 Crew 2 figures (Hobby Fan HF767) HF767](/products/img/9/5/6/1479956-22360-39-t180.jpg)
VIETNAM War Australian Army Infantry & M113 Crew 2 figures
Hobby Fan 1:35
HF767 9 August, 07:06
![](/profiles/img/21408-720-s.jpg)
хочет
![1:35 British FV18001 Mk. 1 80in 4x4 Utility Vehicle (Early Production) (Gecko Models 35GM0076) 35GM0076](/products/img/7/7/0/1569770-38473-80-t180.jpg)
Korean War
British FV18001 Mk. 1 80in 4x4 Utility Vehicle (Early Production) w/10-cwt Bantam Trailer Gecko Models 1:35
35GM0076 2024* Новая разработка 9 August, 07:05
![](/profiles/img/102431-972-s.jpg)
добавил новый фотоальбом.
30 29 February, 04:47
![](/profiles/img/121752-978-s.jpg)
Very beautiful build - subtle shading on the camo - down to the subtle heat staining on the nozzle!
29 February, 17:07
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo