Новостная лента

Guy Rump
My latest offering will be my first helicopter. 🙂

Guy Rump
Made a start on the cockpit. Colours used are Vallejo Model Air black, Hataka khaki green & Hataka medium Sea Grey. 🙂

Many thanks mates for your interest and likes Hajo L, Laurent V, Andrew B, Sebastien C, Lukasz K, Tibor S, Freak & 1 other mate. 👍

J35J
Great start!

Guy Rump
A bit more done on the cockpit and sprayed the interior with Vallejo Model Air Gun Metal. 🙂

Thanks for the kind comment J35J, I appreciate it. 👍

Many thanks mates for your interest and likes J35J, Matti T & 1 other mate. 👍

Hajo Lippke
I like the cockpit! But are you sure with the grey colour for the backside and top of the instrument panel?

Guy Rump
Cockpit and main engine fitted to one side of the fuselage. 🙂

I agree with you Hajo, I have painted the top and back of the instrument panel (where there are no decals) black. I had intended to use a darker grey but the one I did use was quite light. 👍

Many thanks mates for your interest and likes Villiers DV, Neil P, Bernd G & Karel D. 👍

Guy Rump
Fuselage is now together. Next is to mask canopy and attach. 🙂

Many thanks mate for your interest and like Florian H. 👍

Ekki
Following.

Nicolas
I'm in. 👍

Sy Bar
🍿👍

Sergej I
Following! Definately coming out nicer than the one I did decades ago 😄 👍

Dave Flitton
Nice! I am following this one.

Guy Rump
Doors & undercarriage added. Masks added and primer airbrushed on. 🙂

Welcome Ekki, Nicolas, Sy, Sergej & Dave! 👍

Many thanks mates for your interest and likes airjuneau, walaroo, Gary V, David RM, Karel D, Dave F & Lukas M. 👍

Laurent VILLANUEVA HELLER ForEver
top

Guy Rump
Hataka BS Dark Green, Hataka Dark Sea Grey & Vallejo Model Air Black colours used for the fuselage. 🙂

Thanks for the kind comment Laurent. 👍

Many thanks mates for your interest and likes Laurent V, Petr K, Sukhoi 242 & Dom S. 👍

Laurent VILLANUEVA HELLER ForEver
great

Guy Rump
It's been a while since I have showed anything moving the Puma forward. Gloss varnish added and decals applied. Next will be the rotors etc. 🙂

Many thanks Laurent for your kind comment. 👍

Many thanks mates for your interest and likes Alex, Dom_S & NordMito. 👍

Guy Rump
Now completed, my first helicopter. An old tooling but went together relatively well except the canopy which was not great. Apart from that, an enjoyable build. 🙂

Many thanks mates for your interest and likes Qwertzel, Roland & Ferenc S. 👍

J35J
Great work! Congrats to your first heli completed👍🏻

Ekki
Very good result!

Nicolas
Nice Result Guy.

Guy Rump
Many thanks mates J35J, Ekki & Nicolas for your very kind comments, I greatly appreciate them! 👍

Many thanks mates for your interest and likes SB, Nicolas, Patryk S & NLAWScametovisit. 👍

Guy Rump
Many thanks mates for your interest and likes RolfRolf, Joseph L & Alex R. 👍

István Szücs
Interesting project!

J35J
I'm in for the flash flesta 😅👍🏻

Robert Podkoński
Make yourself comfortable, István and J35J. This will be surely a long party... 😉

István Szücs
Robert, almost you'd build an A-Model kit

Robert Podkoński
Believe me, István, A-model kits are much more modeller-friendly than Mach 2... Take a look here, for example: modelingmadness.com/..korean/us/hammx2.htm

Ben M
Another member of the non-aligned movement.

Marko
That's something to be excited about. Mach2 kits don't have the reputation of being shaking kits. 👍

Martin
As I said on the project, I wish you luck with this, it is something you seldom see, but it looks cool in the end. It is quite a long time ago when I did mine - al the best!

and, so far it does not look that bad for a mach2

S M
Gotta see this! 😄

John Hughes
This looks very Gerry Anderson, so I'm in!

Robert Podkoński
What an audience I have... I feel a bit under pressure now 😉 @Martin - you're right, at least the polistyrene seems to be of a good quality.

Guy Rump
I'm watching as well Robert 🙂 👍

Ekki
And me.

Robert Podkoński
Feel warmly welcomed, Mates!

Mid Franconian
Extra like for the striking project title 😂! I expected an old KP kit first…

Bruce Huxtable
Soo many seams.... Watching this tutorial for sure 😉. OMG, Robert, that's quite a critique of MACH, kits.... Good Luck!

Ben M
It's such a cool subject, I remember seeing it in my dads airplane books when I was young.

Ludvík Kružík
Robert, once again you have chosen a great topic. The French experimental jet powered Leduc aircraft looked really futuristic at the time of its creation.
I wish you strong nerves and a lot of fun building your model!

Robert Podkoński
Now I feel even more pressure 😉 ... @Bruce - I know what I am talking about, I have completed a few models from both producers already 😉 @Ludvik - I was lucky enough to see both Leduc 010 and 022 in Le Bourget museum and they still look futuristic imho 🙂

Palo M
Grabbing a sear

Robert Podkoński
Welcome, Palo!

Ludvík Kružík
He certainly wouldn't be a disgrace as a space fighter in Star Wars. 😄

The photos of the kit parts show that you really have a lot of work ahead of you.

John Hughes
Not Star Wars, more Flash Gordon by the looks of those sprues!

Neil
Hi Robert, Haha! 'da Putty Party'... Love it!... Following with great interest 🙂

Robert Podkoński
Feel welcomed to the party, Neil - every party needs a DJ 😄

Neil
Thanks Robert. I'm there mate! 🎧🤘🎶

Ben M
Those parts look gloriously terrible

Robert Podkoński
Still, the plastic is workable, Ben. As far as I have checked: it can be filed, filled, and glued... So, there is hope... 😄

Ben M
I looked in the stash and I have a mach2 kit I bought when I was young and foolish.

Robert Podkoński
I have five, not counting this one... Hmm...the testimony of what kind of mental disease it is? Nothwithstanding, only Mach 2 offered models of some exotic planes, like X-24.

gorby
I wish you luck Robert. Your going to need it (and probably a stiff drink or four). 😉
Was the kit mould made from soap? 😄

Robert Podkoński
Thanks for your encouraging words, Gorby! ... It seems probable, taking into account that in some Mach 2 kits the material itself is "soapy"... 😄

Guy Rump
Another Japanese WW2 aircraft for my stable. 🙂

Nicolas
Following

Guy Rump
Made a start on the Ki-46. The interior main colour is Ammo-Mig Interior Mitsubishi. 🙂

Welcome Nicolas, pull up a stool. 🙂 👍

Many thanks mate for your interest and like Sukhoi 242. 👍

Jan Voorbij
Nice!

Guy Rump
Today I put the wings together and sprayed the parts which will be the undercarriage with Ammo Mig Mitsubishi interior green.

Thanks Jan! 👍

Many thanks mate for your interest and like Patryk S. 👍

Guy Rump
Fuselage together and undercarriage area added to wings. 🙂

Many thanks mates for your interest and likes Pietro DA, Villiers DV & 1 other mate. 👍

Guy Rump
Fuselage joined to wings and tail plane added. 🙂

Many thanks mates for your interest and likes Matti T, Vincent, scaleffect & 1 other mate. 👍

Guy Rump
Engines now on. Engine covers and masking of canopy next. 🙂

Many thanks mates for your interest and likes J35J, Mojo DV & Franck D. 👍

Guy Rump
Cockpit masked and attached. Primer and pre-shading added. 🙂

Guy Rump
Vallejo IJA Grey Green added to the underside. 🙂

Guy Rump
Vallejo IJA Dark Green added to the top side of the fuselage and wings. 🙂

Many thanks mate for your interest and like Franck G. 👍

Guy Rump
Gloss varnish applied and Decals added. Wash applied to panels to weather the aircraft. 🙂

Lost_Erik
Right on! 👍

Guy Rump
And finally complete! Thanks mates for your comments & likes. 👍

Many thanks Lost_Erik for your kind comment, I appreciate it greatlt. 👍

Many thanks mates for your interest and likes William J, Lost Erik, Dave F & NordMito. 👍

Nicolas
Good looking result guy.

Jan Voorbij
Very well done! Congratulations with this result.

Guy Rump
Many thanks Nicolas & Jan for your kind comments, I really appreciate them. 👍

Many thanks mates for your interest and likes Jocaj, SM, Sasa, Cuajete, Nicolas, Tony T & 1 other mate. 👍

Guy Rump
Many thanks mates for your interest and likes Robert P, komoras, Andrew O, Bernd G & Harald B. 👍

Transall NG
Hello Guy,
You may try fishing wire "UNI-Caenis 20 Den Black" for your next antennas wire : it is like spandex, has some elasticity, and doesn't need to be stretched so mast doesn't bend.
It is also very convincing for 1/72 : i can't see it if i don't wear my glasses...
Fine work !

Guy Rump
Hi Transall NG, many thanks for your kind comment and tip for an improved method for antenna wire, I'll definitely be giving it a go in the near future! 👍

Many thanks mates for your interest and likes Mona, Modelman, Mr D, Transall NG & 1 other mate. 👍

Guy Rump
Many thanks mate for your interest and like phobos _101. 👍

Guy Rump
Many thanks mates for your interest and likes Nikita N & Sarunas D. 👍

Ben M
Looks great! Very elegant looking subject and the weathering iand paintwork s nice.

Guy Rump
Many thanks Ben for your kind comment, I do appreciate it. 👍

Many thanks mates for your interest and likes Ben M, Curatorm & NLAWScametovisit. 👍

Guy Rump
Many thanks mates for your interest and likes Lukasz G, Andre K, Yigal L, RolfRolf & Joseph L. 👍

Guy Rump
Hopefully, this should be quite a quick build. 🙂

David Taylor
This takes me back.

Robert Podkoński
Taking a seat.

Guy Rump
Started the Bren Gun Carrier today. 🙂

Welcome David & Robert, pull up a seat. 👍

Many thanks mates for your interest and likes Robert P, Villiers DV, Juskifo, NordMito & 1 other mate. 👍

Chris
I recently built this kit a few weeks ago. Now chips and beer is prepared - watching you 🙂

Guy Rump
Light grey Primer applied. 🙂

I saw yours as you completed it, hopefully mine turns out as well. 👍

Many thanks mates for your interest and likes J35J & Chris. 👍

Chris
The only "dangerous" thing is step 3 in the instruction. I've looked several times and then added a real photo to my album: In the instruction, the single wheel is in the front and the double wheel rear. But I think that is wrong. On the painting of the box and at the color-instructions it is correct. I'm sure you still have noticed that and I am only carrying owls to Athens 😉

Guy Rump
Universal carrier together and painted with Hataka No 15 Olive Drab. Khaki Brown for seats. Next the gun. 🙂

I agree with you Chris, step 3 is wrong whereas the painting instructions are correct. 👍

Many thanks mates for your interest and likes Jan P & Karel D. 👍

Guy Rump
Gun is now together (minus wheels) Next will be adding the wheels, painting the supplied figures and adding the decals. 🙂

Many thanks mate for your interest and like Pietro DA. 👍

Guy Rump
Now completed, the Universal carrier & 6 Pounder Anti-Tank Gun are denoted as a part of the 51st Highland Division that landed at Juno Beach on 6 June 1944. The weathering is light as they are at the beginning of their push forwards. 🙂

Thanks mates for your likes and comments. 👍

Guy Rump
Many thanks mates for your interest and likes Ben M & Curatorm. 👍

Guy Rump
Many thanks mates for your interest and likes Marc, RolfRolf, Joseph L & Alex K. 👍