Новостная лента

Jan Janssen
Unusual subject wonder how it builds up, #following

Mr D
Thanks Jan 👍will update through build.
It's from the 1990's

Mr D
Thanks for the likes 😁👍 it's interesting to see how a 33 year old kit builds up ??

David R. Meizoso
Beautiful subject, I'm also in!

Guy Rump
Following. 👍

Mr D
Thanks Grumpy Guy 👍👍 bit of a different one..

Skyhiker
Very nice

Ben M
👀

Mr D
Ben👋😀👍

Neil
Really nice work Mr D 💯 Following 👍

Mr D
Great Neil, 👋😀.... Thanks

J35J
Great progress! Following👍🏻

Edouard Carr
Great idea about the watch pins! ⌚ Definitely gonna try this out on my builds. Looking forward to the finished result.

Mr D
Hi Edouard👋😀👍.
Yes l just get cheap ones of eBay, the do different sizes, you can pull ends n spring out for barrel look, or file ends last to have a recoil cannon look.
The gun turret nearly there now....lots of sanding n filling low spot.
Thanks for looking in on build.👍👍

Michael Kohl
Following

Mr D
Thanks Michael 👋😀👍
Good to have you along ✈️

Zbynek Honzik
I'm very curious to see the result. I built this model as a young boy too.

Mr D
Hi Zbynek 👋🙂👍.
Thanks for your interest. Nice to know you had it too, l built X3 the Tu airliner and the bomber. But this was my favourite as l liked the shape and that it had floats n guns.
Got part of tail on this evening.
Keep looking in for updates 😃👍👍

Mr D
Airliner Was the Tu-134

Guy Rump
Looking good, following. 👍

Mr D
Good to have you along Guy 👋😃.
Bit of fine sanding n tidying to do next then look at getting an engine effect in cowling area.
I replaced side vent for smaller one now, checked photos... and l made it way to big.
Catch you on the next steps.

Mr D
Thanks to Everyone who has liked n taken an interest 👋😃👍.. Appreciate it 👍

Edouard Carr
Hey Mr D whats the Gorilla Glue like? Is it a clear PVA or a resin Super Glue Type? Do you use it just for clear bits or as n all purpose? Thanks in advance E.

Mr D
Hi, it dries 100% clear but is slow.. to air dry ..so leave overnight.
But it's worth it as very strong. And is very neutral on paint and clear parts.
It's almost like an air drying epoxy, not harsh like super glue or poli ...very safe.
I only use it on clear stuff as it's stronger than PVA but not good for general building.. l do use it to fill gaps sometimes.
👍

Mike Montgomery
Don't think I'd trust those decals. The red stars are easy enough to replace or paint on, the bort numbers might be more of a challenge.

Edouard Carr
GG. Now added to my shopping list along with watch pins 😉

gorby
Looks like an interesting build.

Mr D
Hi Edouard 👋..yes 🤣 lm on 12 model with it and never had anything come loose.
Mike👋.... No mention neither! I've purchased some more Soviet stars now, may have some numbers leftover from others project's.
Gorby, Thanks buddy 👍

Christian W
This is a quite interessting plane you're building! I like the shape of the wings. Pretty good build and pictures.

Mr D
@ Christian W.
Thanks buddy 🙂👍
Yes it a bit different, yes has nice gull-wings.
It's a trip down memory lane for me... I slapped one together back in 1991 as a kid.
Thanks for the interest.... I like seeing people's build processes n history....so doing the same.👍👍

Dave Flitton
Looking good so far

Mr D
Thanks Dave.
Will be prepping for paint very soon... Stay tuned.
😁👍

Zbynek Honzik
I'm anxiously waiting at the monitor for the paint job! Fingers crossed!

Christian W
Mr D ... 🙂 I like too to see, how much progress my skills during the last 10 years did. Good for me is, that I own most of my model kits since I was a kid. My first plane, car and truck are still in my shelf or boxes.
Because I stumbled somehow over your wip, I checked the history of the kit. It is rally unbelievble, that those engine openings are on the bottom of the motors. Amazing. I wouldn't notice that without your hint.

Lorraine Lin
Cannot wait to see the result. Your work reminds me of my first kit, it was a Victor bomber by Matchbox (They had a JV factory in Shanghai at that time). But hard find it in the market now.

Mr D
Hi Lorraine 👋.
Glad your interested 👍 there are X2 colour schemes for the be-6 the Soviet green or the Chinese blue, l liked the blue version but could only find suitable replacement decals for Soviet.
My first kit was the Matchbox Electric lightning,.... Built it with my dad....was nice as was 3 colour plastic out the box.
The first models l built on my own were the Veb/Playfix be-6, & Tu- bomber, so nice to revisit.
Got X2 models at min I'm preparing for paint.
Yours is coming along well...."carefully work" 👍👍

Kesa Tiho
Ah yes, my favourite scale 1:no. Following with interest

Mr D
Thanks Cortex.
👍👍

Mr D
Hi Robert 👋
Thanks 👍

Skyhiker
That's coming together well.

Mr D
Thanks Skyhiker 👍
I usually use Velejo or AK acrylic, but I'm going to use Tamiya on this one as it won't fit in cabinet.....and l find Tamiya acrylic is a tough paint better for wear n tear, as I'm sure it's going to need dusting now n then 🙄🤣.
The Tamiya paint turns out to be darker than advertised on the lid n chart, I've ordered a white n thinner to Tone down.
Like you I've had 2x build going on.
The Fw-190 really pop's once decals are on..... Remember the trim tabs are red....l just had paint.
😁👍

Marko
As a child, I once built the kit with my father.
Very simple kit of its time. But the shapes and proportions are convincing and you really did a fantastic job with it. I'm looking forward to the finished model.👍

Cristian A
Taking a seat and popcorn 🍿

Skyhiker
Welcome Cristian A.

Dave Flitton
Watching

Robert Podkoński
Taking a seat too!

Skyhiker
Welcome gentlemen

Skyhiker
For a relatively new kit I am surprised on how much flash and fitting issues this kit has.

Skyhiker
It's really hard for me to fight off the urge to correct the structural issues with this kit. But I promised myself I would make this one out of the box.

Patrick Hagelstein
I've seen that promise before Skyhiker! 😂 Good luck keeping this one OOB! 😉👍🏼

Skyhiker
I really hate Revell conopys.

Sergio Ordonez
Mate, I think you should put the windshield uspside down. The ángel does not cope with the real one as I see on photographs.

Skyhiker
Unfortunately it looks even worse the other way around. The idiot engineers at Revell should be fired.

Sergio Ordonez
Well, I had some work with French engineers and I know shit happens. Could you take a photo with this one in the other position?

Sergio Ordonez
drive.google.com/fil..J9/view?usp=drivesdk
The windshield is not an isoscelles triangle so the windshield has not a 45 degree ángel over the capot. Please, see these example of a TA-152 (and please, mind It is 35 years old and I was only 13 when I drestroyed It).
I think an easy solution can be made. I do not want any mate to be anoyed by an engineering issue. I had them everyday (it's my job, Factory engineering problem solving, known as 'shit managing") and It can destroy your mojo.

Ben M
What a terrible canopy

Skyhiker
After several hours of sculpting I got the canopy to fit better. I will continue with it tomorrow.

Sergio Ordonez
Your mojo works, mate! Now you have became a great problem solver!
On the other hand, I think another 3D engineering guy needs to stop drinking and 20 years of 2D drafting. The fitting is worse than I could imagine. But I see is no a problem for a seasoned mate like you. Great work, mate!

Nicolas
Following. I build this kit several times in older versions. The fit of the canopy is realy sh*t. My solution was (with about 10 years) to sand the backside of the windshild till it fitted. Of corse so most of the frame is missing.

Thomas Kolb
What a struggle! It reminds me of some Heller and Amodel kits. But it looks that you manage to coax it into shape!

J35J
Great effort and progress! 👍🏻

Skyhiker
Sergio the TA 152 had a very different canopy than the 190. The 152 was designed for high altitude flying, was pressurized and had double panes.

Sergio Ordonez
Thanks you, Skyhiker: I think I can remember now, as I researched about FW190 and TA152 black in the 90's. Also, canopy is bubble-shapped. Sorry, my FW190 Mustang have been gone forever, I expent the night trying to find It, just to find my solution, but I think only the reta of the TA152 has survived.

Mr D
You done a better job of the seat belts than l did 🤣. The cockpit glass on my model was not very clear!
Looking good, ... Thanks for uploading 👍👍👍

Skyhiker
Mr D did you also have so much trouble with the canopy? I read in the kit review at the bottom of the page that it was bad. I really wish the reviews would be moved up because I always forget about them. It took me quite a while to get the canopy to work. It needed a lot of reshaping to look right.

Skyhiker
I decided to make my own blueprint for this plane. So, that's taking up a lot of my time at the moment.

Mr D
Hi, yes l had trouble too, l did a dry fit before paint, and l had to take a combination off the glass n some off fuselage, and had to use a bit of UV clear resin.
I got it to fit in the end, but it's not very clear to see through.
I had a bit missing of my engine fan too, had to make it up with super glue gell.

Alexander Grivonev
Built one too back in the day, the nightfighter version. Speaking of the canopy, I like how the rear part of it is just molded to the fuselage 😄. Used some other canopy I found in my spares because the one from the kit was entirely unusable.

Mr D
Looking good 👍👍
It's a nice model when it's finished once you sort the shortcomings out.
I did get my prop to spin in the end....had to do alot of work to the cooling fan to make it run smoothly.
Good luck on next steps 😃👍

Skyhiker
If I had thought it would have been a problem I would have dry fitted everything first. But I wanted to keep the parts on the sprue for painting. It wasn't worth messing up the paint job just to get the propeller to spin. Especially since the contact points were so fragile. So in the end I glued it together so it will be stable.

Skyhiker
Working out the fuselage patterns today.

Mr D
Looks good 👍👍

Guy Rump
Looking good. 👍

Mr D
Nice to compare the two.
👍

Skyhiker
I got the legs and nose on and painted the exhaust today.

Villiers de Vos
Very nice progress. Phenomenal paint work.

Skyhiker
I got the decals on today.

Mr D
Nicely done.....looks good now 👌👍👍
You managed to get a correct decal for the tail.... Better.
You got it very close to box art.

Skyhiker
Thanks Mr D.

Mr D
On the fiddly bits... Did you decide to make your own part for that Whip shaped thingy🤣 don't know what it actually is 🫣.... ?
Quite a few little fragile bits on the bottom... I was extremely cutting n sanding these.
Like the way the guns are visible through wheel well's👍

Skyhiker
Mr D, the Morane antenna I built by filing down a wooden toothpick and super gluing a hog's hair on to it that I got from a cheap brush. The kit part was ridiculously out of scale. I use this hog's hair method for whip antennas and static dischargers because the hair is flexible enough that it won't break off.

Mr D
AHH thanks it's Antenna 👍 be better with bit of flexibility... looks more accurate to photos as well.
I noticed HB do a Ta-152 kit....looks quite good for price.. bit of PE in kit.
I was tempted.....but promised myself l will build one buy one 🙄🤣.

Skyhiker
Lol. I promised myself the same thing and the next week someone offered me their entire stash of 45 kits for super cheap, which I bought immediately.

Mr D
🤣... Keep you out of trouble for a while.

Ben M
…. Goes to look at SH's stash …

Nicolas
Beautiful result. 👍

Mr D
Like it turned out really well 👌👍
Well done

Guy Rump
Lovely job! 👍

Patrick Hagelstein
Well done as well Skyhiker! 👍🏼

Villiers de Vos
Very nice work.

Neuling
Very well done!

Sergio Ordonez
Impressive work over a humble model that has all reasons for being humble. Only your hands had the skills for making It such a good work. My congratulations and let me bow my hat.

Skyhiker
Thank you Sergio. I try and sometimes things work out.

Mr D
Thanks Alberto 👍
How's the Be-12 going?

Robert Podkoński
Watching with interest 🙂

Mr D
Thanks Robert 😁👍
I've built few of these little guy,s there nice n easy n refreshing after bigger builds.

Mr D
Thanks Villiers 👋😃👍
.fun little builds good for filling gaps on the shelf .

Guy Rump
Looking good, following. 👍

Skyhiker
I think you should do the factory test model red AND the conservative grey scheme! They are both cool. Heck maybe you should do 20 or 30 of these little suckers. That would be fun.

Mr D
Hi Skyhiker 👋
Thanks.... the red looks smart, quite a few weapons to paint up too.. going to need my magnifying visor.
I have the German F4 phantom and the hornet lined up in the stash 🤣

Mr D
Thanks Edouard 👍
I noticed you have the Airfix Tomahawk on order?
That's a really nice kit to build ...goes together well , the back wheel n control stick are bit fragile! So be careful.

Ben M
Is that a Su-9 in photo 10?

Mr D
Hi Ben 👋
It's
Starfighter,
F-14 tomcat,
Mig-21
Mig-23 ground attack version.
👍

Ben M
😍

Guy Rump
Lovely collection. 👍

Mr D
Thanks Guy 😁👍
The little 1:144 good for saving room 🤣.
I would like to do full size Starfighter at some point .

Mr D
^^ full size 🤣🤣 1:48 ^^

Ben M
Hahaha! I have a "full size" starfighter coming up too. It's such a beautiful aircraft.

gorby
Nice result on all of them.

Mr D
Thanks Gorby Appreciate it....there my little fill-in substitutes ....till l get round to 1:48
Definitely want to do a Starfighter in larger scale.
Good luck with your projects 👍

Mr D
Thanks for the lovely Likes 😁👍
Will have to look into the fiddly weapons next.

Skyhiker
Looking good

Andrzej Rygiel
I like to do 144th scale minis in between some bigger scale models and your Tigershark is an eye-catcher, it will really stand out in this bright livery! Gives me some ideas for my next builds 😉

Mr D
Hi Andrzej.
Thanks 👍 yes they are nice to do now n then between or after bigger builds.
Yes it's a nice bright red, the Northrop factory colour.
Good luck with your projects 👍👍