Новостная лента

Dave
Nice clean look. 👍

Dave
Nice job

Desert Marlin
Paint scheme looks great!

Dave
This is looking great. Like the colours

Rando
I have this very kit and am planning to build it soon! How did you get such fine painting on the instrument panel? It looks amazing!

KyMustang
Thanks Rando. I dry-brushed dark grey and white on the instrument faces and then picked out some buttons and placards with a very fine brush. Dry-brushing highlighted some areas that I didn't want highlighted so I came back with some flat black and repainted the "rim" around the flight instruments.

Each of the dials will get a drop of clear later. Check out my album on the Revell P-51D for another panel if you're interested.

Rando
Great to hear about how you did this, and I definitely will!

Rando
Very nice! I think you have the right idea of not attaching the seat yet since it's so flimsy…maybe I'll carefully remove mine. How did fitting that radio part work out for you? Did it go in like we discussed?

KyMustang
Thanks. Yeah it'll go in later along with the rollover bar. Also gives me time to scratch seatbelts.

The rear radio rack went perfectly above and behind the main rack. It fits under the horizontal "stringer" aft of the main radio deck.

Desert Marlin
Your struggle seems to be coming along in excellent fashion!!!! Keep it up! 👍

KyMustang
Thanks for the encouragement. I have four more of these Allison birds in the stash and this is the variant I like the least….so on the upside, I'm learning a lot for the others! 😂

Desert Marlin
True model building!!!

Rando
Nice smooth finish you got with the primer there. Gonna be a nice paint job!

KyMustang
Thanks! Looking forward to getting some paint down. Though I think Mr. Surfacer deserves more credit for the primer finish than Mr. KyMustang!

Desert Marlin
Mr. Surfacer works really well! I like using the PostIt Notes for making...

Steven Van Dyck
The frame is constructed in the first building step. It's a bit complicated to analyse, but you have to get through this to get all the components ready to fit between the profiles.

Lenny Li
Looks fun with all those PE sheets!

Neuling
Looking forward here ..........

Steven Van Dyck
All welcome, I now assembled the front and 4th axles. All are movable in a steering position, but as usual you have to decide and then fix everything. Also I found that one set of wheels is not parallel, so I cut the steering arm and added a millimeter of sprue roundel. Does this not appear if they test-fit these kits, or did I make a build error?

Steven Van Dyck
All 4 axles are now added to the frame, together with the shock absorbers that I had to shorten a bit at the front axle. The torsion bars are fixed at one side so I can remove the air bellows for painting.

Steven Van Dyck
The fuel tank hoops and steps are now replaced with PE. The steps are quite hard to bend in the right order and no dimensions or angles are given to mount them.

Steven Van Dyck
The radiator is now detailed with the Voyager silver mesh. You only see the front side now, it's on both sides. When it was assembled I realised that the air horns also need a PE part. There is some warping in the sump and the top cover, I hope it isn't evident looking through the front grille later on. The air tanks must be stripped like the fuel tanks, but you get equal lengths of PE strips to attach two kinds of tank. Therefore I clipped 4 of them and redrilled the hole on the end. The assembly with the 2 tanks and the container is suspended on a single PE part that I had first bent the wrong direction, I hope it doesn't get fatigued.

Steven Van Dyck
I started the interior with some colored PE from Eduard. The Black Dog figures are assembled and also a Maim figure and two Legend armament sets were added to the project. But the Maim gunner appeared to have a large backpack, so I don't know he's feasible.

Steven Van Dyck
Continuing the interior with the seats. Also the fenders are completed, it's very important to align the bent beams that sometimes are replaced woth Voyager assemblies. It's preferable to use that, the replacements are sturdier than the originals.

Steven Van Dyck
The cabin exterior is done using some original kit PE and clearparts, but both have problems. The clearparts are not calibrated and have distortion because of this. I will be replacing the large parts with plexiglass. The kit PE is wobbly because it's not thick enough., I even had to hammer it quite a while. Then I found out Voyager does replace half of the protection kit, but not the large parts behind the doors. At least half of the creases are removed then. But Voyager messed up at the hood closing strip, providing two identical parts in stead of mirrored ones. This could be remedied with some re-riveting.

Steven Van Dyck
The pVoyager photo etch cabin roof is constructed with all its nightmarish embossing deformities corrected, the badly fitting airco module that was mosly bent the wrong way around so it broke at one instance. I replaced the 3 largest clearparts with a piece of Trumpeter 1/350 airplane set transparent box cover, that has the right thickness to be able to sand the corner roundings in it. The air purifier system is not installed completely, because that would impede the clearpart masking. So now it's down to interior painting.

Villiers de Vos
Thank you for sharing. Very nice work.

Mike Frazer
Thank you!!!

Lost_Erik
Fine collection.

Mike Frazer
Thank you!!!

Pierre Pierre
diversified colleaction, thank you for sharing

Mike Frazer
Thank you!!!

Mr D
Nice work, you got some really interesting subjects in your collection, l like the nice clean look,
Keep up good work 👍👍👍

Mike Frazer
Thank you!!!