Новостная лента
greenbucket
хочет
хочет
Deluxe Edition
Centurion Tank Mk 5/1 Royal Australian Armoured Corps (Vietnam War) Vespid Models 1:72
VS720007S 2022 Новые детали 5 October, 04:43
Tcamp
добавил новый фотоальбом.
добавил новый фотоальбом.
9 24 September, 12:55
Tcamp
Texas hurricane is underway let the fun begin!
Sorry for inverted pics cant get rotated🤠
Texas hurricane is underway let the fun begin!
Sorry for inverted pics cant get rotated🤠
28 September, 19:13
Ben M
Rotation is well hidden. To rotate your photos, open your album. Click on "manage". Then turn on the "advanced options" toggle. You will now have the ability to rotate photos in the album.
Rotation is well hidden. To rotate your photos, open your album. Click on "manage". Then turn on the "advanced options" toggle. You will now have the ability to rotate photos in the album.
29 September, 00:07
Tcamp
I reworked the main jib boom
I wasnt feeling the kit one
Its still a work in progress
I reworked the main jib boom
I wasnt feeling the kit one
Its still a work in progress
2 October, 21:03
Tcamp
Thank yall
Im not a rivet counter or anything but.....
The more i looked at the kit boom i could not figure how it would work ..
Revell had their boom right im also going to support mine as they did and use poles instead of ratlines. Which tie down inside of the work area ?
Im not feeling that one either lol
Again thanks
Thank yall
Im not a rivet counter or anything but.....
The more i looked at the kit boom i could not figure how it would work ..
Revell had their boom right im also going to support mine as they did and use poles instead of ratlines. Which tie down inside of the work area ?
Im not feeling that one either lol
Again thanks
2 October, 23:14
M0rce
Oooohhh... so nice 🙂
A Lindberg kit? Seen them but never got one, yet. That looks amazing.
Oooohhh... so nice 🙂
A Lindberg kit? Seen them but never got one, yet. That looks amazing.
3 October, 12:21
Snake Plissken
Started out life as a Pyro Plastics kit which in turn was a reverse-engineered copy (pretty much a blatant rip-off) of the Model Shipways wooden kit of the M.T. (Motor Trawler) Hildina H-222 which was built by Cook, Welton & Gemmell Ltd. in 1951. If you look for photos, you will see it matches the Hildina except for some artistic license in the pilothouse windows mainly but an easy fix. The sloped rear pilothouse roof is also a distinctive feature of the Hildina. Apparently the front boom can face forward or aft (is it on a swivel?) according to need. I know the boom was used to hoist the cod end (heaviest part of the net) aboard. These kits are a great basis for conversion to R/C as the original plastic kits were motorized.
Started out life as a Pyro Plastics kit which in turn was a reverse-engineered copy (pretty much a blatant rip-off) of the Model Shipways wooden kit of the M.T. (Motor Trawler) Hildina H-222 which was built by Cook, Welton & Gemmell Ltd. in 1951. If you look for photos, you will see it matches the Hildina except for some artistic license in the pilothouse windows mainly but an easy fix. The sloped rear pilothouse roof is also a distinctive feature of the Hildina. Apparently the front boom can face forward or aft (is it on a swivel?) according to need. I know the boom was used to hoist the cod end (heaviest part of the net) aboard. These kits are a great basis for conversion to R/C as the original plastic kits were motorized.
4 October, 14:31
Tcamp
Cool info snake..
In my minds eye its on a swivel i didnt model a swivel base ( i guess i could have)
And i just liked the chain ( lol )
I wasnt sure what it was midelled after so thats good info
Thanks for that information i appreciate it brother!
Cool info snake..
In my minds eye its on a swivel i didnt model a swivel base ( i guess i could have)
And i just liked the chain ( lol )
I wasnt sure what it was midelled after so thats good info
Thanks for that information i appreciate it brother!
4 October, 15:06
Snake Plissken
@Tcamp. Good color choice! Most of the British side trawlers had a black painted hull, white is definitely not the norm. I created an entry here for the Model Shipways Hildina because there wasn't one. It's the exact same scale and dimensions but is a wooden kit.
@Tcamp. Good color choice! Most of the British side trawlers had a black painted hull, white is definitely not the norm. I created an entry here for the Model Shipways Hildina because there wasn't one. It's the exact same scale and dimensions but is a wooden kit.
4 October, 21:33
M0rce
The details on this kit are so crisp. Looking forward to seeing what you're doing to the rear section.
The details on this kit are so crisp. Looking forward to seeing what you're doing to the rear section.
5 October, 04:18
Paul Doyle
владеет этим предметом
владеет этим предметом
Messerschmitt Me-163B "Komet" Rocket-Powered Interceptor
Meng Model 1:32
QS-001 2013 Новая разработка 5 October, 04:15
Starbase101
владеет этим предметом
владеет этим предметом
P-61B Black Widow Correction Set
Lone Star Models 1:48
5 October, 04:11
Alberto Traverso
добавил новый фотоальбом.
добавил новый фотоальбом.
22 4 September, 23:58
Neuling
Top work! Mud and camouflage look good, but the model was also eyecandy in mint fresh condition.
Top work! Mud and camouflage look good, but the model was also eyecandy in mint fresh condition.
3 October, 09:46
Alberto Traverso
thanks Neuling, yes sometimes it's some kind of a hard decision to cover the paint job
thanks Neuling, yes sometimes it's some kind of a hard decision to cover the paint job
3 October, 10:59
Lorraine Lin
добавил новый фотоальбом.
добавил новый фотоальбом.
135 26 August, 05:51
Robert Podkoński
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!
26 August, 05:55
Robert Podkoński
Makes me wonder, what happens next... You've managed this skeleton kit absolutely perfectly. Chapeau bas!
Makes me wonder, what happens next... You've managed this skeleton kit absolutely perfectly. Chapeau bas!
16 September, 17:10
tyu
Nice, VERY nice! How did you attach the metal parts: glueing or soldering? Very clean build, impressive1
Nice, VERY nice! How did you attach the metal parts: glueing or soldering? Very clean build, impressive1
16 September, 18:07
CaptGPF
Here's a dumb question - how do you keep the paint from chipping off of the PE? I tried spraying Mr Surfacer on it, prior to painting, but it still chips very easily.
Here's a dumb question - how do you keep the paint from chipping off of the PE? I tried spraying Mr Surfacer on it, prior to painting, but it still chips very easily.
16 September, 18:11
Lorraine Lin
Thank you everyone!
@Michael Kohl, this kits are from Jasmine Model. The PEs are great, while the instructions a little bit difficult to understand.
@tyu, I used instant adhesive to glue them together. Some small parts, I used UV glue.
@CaptGPF, I used Mr. Color C series to paint it directly after assembly, keep the paint as thin as possible. But yes, it still chips easily, try not to touch it : )
Thank you everyone!
@Michael Kohl, this kits are from Jasmine Model. The PEs are great, while the instructions a little bit difficult to understand.
@tyu, I used instant adhesive to glue them together. Some small parts, I used UV glue.
@CaptGPF, I used Mr. Color C series to paint it directly after assembly, keep the paint as thin as possible. But yes, it still chips easily, try not to touch it : )
17 September, 01:58
bughunter
Great project!
As I build some Stripdown aircraft already I thought about this one too, but the kit is hard to get here and pricey so it was only an idea.
@CaptGPF You can apply Mr.MetalPrimer from Gunze first. It is a acrylic clear coat which hardens to a thin robust layer even if applied with a brush. I prefer the glass bottle over the rattle can.
SF-242 Mr. Metal Primer, Mr.COLOR , Lacquer, 40ml
Great project!
As I build some Stripdown aircraft already I thought about this one too, but the kit is hard to get here and pricey so it was only an idea.
@CaptGPF You can apply Mr.MetalPrimer from Gunze first. It is a acrylic clear coat which hardens to a thin robust layer even if applied with a brush. I prefer the glass bottle over the rattle can.
SF-242 Mr. Metal Primer, Mr.COLOR , Lacquer, 40ml
17 September, 14:19
Michael Kohl
I have used Mr Metal Primer for a while too with satisfying results. Paint adheres much better.
I have used Mr Metal Primer for a while too with satisfying results. Paint adheres much better.
17 September, 17:31
Michael Kohl
Copper foil plating and going for a french version. This is getting better every day. 🙂
Copper foil plating and going for a french version. This is getting better every day. 🙂
17 September, 17:34
bughunter
There is a newer version with an additional "-R" on the name, I don't know what was changed. I still use the original one.
Tamiya has also a product for this (have not tried it): 204 Metal Primer, Tamiya Gloss, Enamel, 40ml
There is a newer version with an additional "-R" on the name, I don't know what was changed. I still use the original one.
Tamiya has also a product for this (have not tried it): 204 Metal Primer, Tamiya Gloss, Enamel, 40ml
17 September, 19:24
Mr D
Now Lorraine....That is dedication to accuracy 😲.
This is why the Chinese were making Ming vases.. while the rest of the world made clay pots 🤣.
Very talented n clever 💯%
Now Lorraine....That is dedication to accuracy 😲.
This is why the Chinese were making Ming vases.. while the rest of the world made clay pots 🤣.
Very talented n clever 💯%
17 September, 19:55
Lorraine Lin
Thank you Mates!
@skyhiker, It is 0.02mm cooper foil, and it needs to be annealed first (>650 degree C, a cigar lighter or gas cooker is good enough.)
@Micheal and bughunter, thank you for the suggestion, I just ordered Mr. Metal Primer-R.
Thank you Mates!
@skyhiker, It is 0.02mm cooper foil, and it needs to be annealed first (>650 degree C, a cigar lighter or gas cooker is good enough.)
@Micheal and bughunter, thank you for the suggestion, I just ordered Mr. Metal Primer-R.
18 September, 02:30
Lorraine Lin
@bughunter, I just received the new "-R" version. The new label says "improved transparency".
@bughunter, I just received the new "-R" version. The new label says "improved transparency".
19 September, 10:44
Skyhiker
The rivets on the copper look a bit strange because they are not in alignment with the plane's ribs. On a real aircraft wouldn't they be?
The rivets on the copper look a bit strange because they are not in alignment with the plane's ribs. On a real aircraft wouldn't they be?
19 September, 11:07
Lorraine Lin
@skyhiker, thank you for the comment. This is to verify my idea, I am making a new skin. And will try to make the rivets to align with the ribs. Thank you again.
@skyhiker, thank you for the comment. This is to verify my idea, I am making a new skin. And will try to make the rivets to align with the ribs. Thank you again.
19 September, 11:23
bughunter
Thank you for the info!
I hope it still sticks to metal like the original.
Thank you for the info!
I hope it still sticks to metal like the original.
19 September, 11:42
bughunter
Wnat to mention another usage:
The Mr.MetalPrimer can also be used, if the metal should not be painted. It protects the metal surface and prevents tarnishing and oxidation over time.
Wnat to mention another usage:
The Mr.MetalPrimer can also be used, if the metal should not be painted. It protects the metal surface and prevents tarnishing and oxidation over time.
19 September, 11:49
Alexander Grivonev
Additionally to the metal primer you can treat your PE parts with a fiberglass eraser pen beforehand. It cleans the metal from the oxide layers and roughens it up just a tiny amount to create perfect conditions for paint adhesion.
Additionally to the metal primer you can treat your PE parts with a fiberglass eraser pen beforehand. It cleans the metal from the oxide layers and roughens it up just a tiny amount to create perfect conditions for paint adhesion.
19 September, 13:13
CaptGPF
Fantastic progress! It's a pity that the beautiful framing is covered up. Did you press the foil against the kit to get the detailing?
Fantastic progress! It's a pity that the beautiful framing is covered up. Did you press the foil against the kit to get the detailing?
19 September, 15:34
Kesa Tiho
I cant put my finger on it but it seems too perfect. Too good to be true
I cant put my finger on it but it seems too perfect. Too good to be true
19 September, 17:16
Robert Podkoński
If you look closer, you will spot a few imperfections, Kesa (both on the side of the Jasmine model kit, and in the assembly). Notwithstanding, is a fantastic piece of workmanship.
If you look closer, you will spot a few imperfections, Kesa (both on the side of the Jasmine model kit, and in the assembly). Notwithstanding, is a fantastic piece of workmanship.
19 September, 17:26
Alexander Grivonev
I agree with Robert, everything looks authentic and not "doctored". I absolutely do not want to take away from Lorraine's craftsmanship, but there is nothing "too good to be true" about this. Great idea, very well executed, just fantastic craftsmanship. Every step is plausible and well documented and I don't even know how or why you would fake something like this 😄
I agree with Robert, everything looks authentic and not "doctored". I absolutely do not want to take away from Lorraine's craftsmanship, but there is nothing "too good to be true" about this. Great idea, very well executed, just fantastic craftsmanship. Every step is plausible and well documented and I don't even know how or why you would fake something like this 😄
19 September, 17:53
Skyhiker
Well for 300 Euros per kit some people might have to fake it. That's a lot of money.
Well for 300 Euros per kit some people might have to fake it. That's a lot of money.
19 September, 18:14
Alexander Grivonev
but faked HOW is what I wonder about. CGI? Yeah, it looks impressive, but it is still a kit. You cut the parts out, you assemble them and you paint the whole thing, no black magic to it really. It would be much more difficult to "fake" it imho
but faked HOW is what I wonder about. CGI? Yeah, it looks impressive, but it is still a kit. You cut the parts out, you assemble them and you paint the whole thing, no black magic to it really. It would be much more difficult to "fake" it imho
19 September, 18:24
bughunter
@Skyhiker Do you mean 300€ for the whole project, with the Eduard kits and accesories?
The Jasmine Hellcat can be found from below 130€ from aliexpress (ok tax and co needs to be added) and around 150€ in ebay, but not 300! List price at Jasmin own shop is 169$
@Skyhiker Do you mean 300€ for the whole project, with the Eduard kits and accesories?
The Jasmine Hellcat can be found from below 130€ from aliexpress (ok tax and co needs to be added) and around 150€ in ebay, but not 300! List price at Jasmin own shop is 169$
19 September, 18:31
CaptGPF
@Kesa - if you think this is too perfect, wait till you see some of the other posters like Neuling, Mr James, Markus and Jörg (to name a few)- their stiff will also blow your mind!!!! However, Lorraine is definitely the God of PE!!!!!
@Kesa - if you think this is too perfect, wait till you see some of the other posters like Neuling, Mr James, Markus and Jörg (to name a few)- their stiff will also blow your mind!!!! However, Lorraine is definitely the God of PE!!!!!
19 September, 20:09
Kesa Tiho
@alexander grivionev i would say its just a pre built set but because of the WIP photos i cant :/
@alexander grivionev i would say its just a pre built set but because of the WIP photos i cant :/
19 September, 20:34
Kesa Tiho
I didnt mean my comment as an insult to her and her ability to build, paint etc builds. I just found her build oddly good
I didnt mean my comment as an insult to her and her ability to build, paint etc builds. I just found her build oddly good
19 September, 20:36
Mr D
Kesa, sometimes things can come across wrong way, so it's best to keep comment positive or just hold back... Everyone including yourself has nice experience here.
The site is a community forum and not competition ground.
There are people who are starting out ...brush painting over sticky fingerprint's.
Also there are amazingly talented artists like Lorraine here.
Everybody work n project is important to them, it's the enjoyment of the hobby above all, as you know for the nice work you have created yourself... Hopefully subject will move on now..🤣
Kesa, sometimes things can come across wrong way, so it's best to keep comment positive or just hold back... Everyone including yourself has nice experience here.
The site is a community forum and not competition ground.
There are people who are starting out ...brush painting over sticky fingerprint's.
Also there are amazingly talented artists like Lorraine here.
Everybody work n project is important to them, it's the enjoyment of the hobby above all, as you know for the nice work you have created yourself... Hopefully subject will move on now..🤣
19 September, 22:08
Lorraine Lin
I believe that the friends in this community enjoy the process of building models, the satisfaction of removing the painting masks, and the interaction and sharing with mates here. Rather than showing off a pre-built model. I joined this community a little over a month ago, and I've seen many excellent works here, learned a lot of building techniques, and most importantly, had the opportunity to communicate with mates from all over the world. I feel connected with everyone, and I will continue to complete this project. Thank you for all your comments and support.
I believe that the friends in this community enjoy the process of building models, the satisfaction of removing the painting masks, and the interaction and sharing with mates here. Rather than showing off a pre-built model. I joined this community a little over a month ago, and I've seen many excellent works here, learned a lot of building techniques, and most importantly, had the opportunity to communicate with mates from all over the world. I feel connected with everyone, and I will continue to complete this project. Thank you for all your comments and support.
20 September, 08:36
Lorraine Lin
@CaptGPF, yes, I press the copper foil against the kits to get the shape and details. I don't know "rubbing" is the right word the describe the process. And I plan to cover half of the fuselage. So it is called "cut away": )
@CaptGPF, yes, I press the copper foil against the kits to get the shape and details. I don't know "rubbing" is the right word the describe the process. And I plan to cover half of the fuselage. So it is called "cut away": )
20 September, 08:54
Lorraine Lin
I applied Mr. Metal Primer-R as mates suggested here, it works well. The only thing is the surface is a little bit sticky even after 12 hrs. I guess this is how it prevents the painting from chipping.
I applied Mr. Metal Primer-R as mates suggested here, it works well. The only thing is the surface is a little bit sticky even after 12 hrs. I guess this is how it prevents the painting from chipping.
20 September, 09:14
Kesa Tiho
@lorraine i can see, i feel honoured to have one of my builds be followed by a skillful builder like you
@lorraine i can see, i feel honoured to have one of my builds be followed by a skillful builder like you
20 September, 09:48
CaptGPF
@Kesa - I don't think anyone took your post as inflammatory or starting a war - it's nice having conversations like this - and I think it's the best compliment once can receive when someone says "it looks too good". Be yourself!
@Kesa - I don't think anyone took your post as inflammatory or starting a war - it's nice having conversations like this - and I think it's the best compliment once can receive when someone says "it looks too good". Be yourself!
20 September, 14:23
Mr D
Wander if the 🧸 bear gets sticky paws gluing all that PE together .... they make a talented team there pair..🤣
Coming on really well Lorraine.... interesting to see a different technique 🐻✌️
Wander if the 🧸 bear gets sticky paws gluing all that PE together .... they make a talented team there pair..🤣
Coming on really well Lorraine.... interesting to see a different technique 🐻✌️
20 September, 20:44
Ben M
Very creative modeling. I enjoy seeing someone build something to this high of a standard as well as trying new things.
Very creative modeling. I enjoy seeing someone build something to this high of a standard as well as trying new things.
21 September, 04:35
Lorraine Lin
Thank you Mates!
@Mr D, haha, actually she is a lovely fox, Lina Bell. My favorite friend in Disney Land 😄 I built a helicopter for her.
[img1]
Thank you Mates!
@Mr D, haha, actually she is a lovely fox, Lina Bell. My favorite friend in Disney Land 😄 I built a helicopter for her.
[img1]
21 September, 11:57
Mr D
😁 your right a 🦊 fox got the pointy ears..fox's need to get about too 🤣
Really good...👍👍
😁 your right a 🦊 fox got the pointy ears..fox's need to get about too 🤣
Really good...👍👍
21 September, 15:15
Mr D
Propeller looking 👍 nice.
Care you planning to cover it all ??
Or have some of the model skeletal for a display-cutaway effect??
Propeller looking 👍 nice.
Care you planning to cover it all ??
Or have some of the model skeletal for a display-cutaway effect??
28 September, 14:07
Lorraine Lin
Thank you Mate!
Robert and Mr D, I will not cover it all, maybe some part of the wing. Will leave it as cutaway effect.
Thank you Mate!
Robert and Mr D, I will not cover it all, maybe some part of the wing. Will leave it as cutaway effect.
28 September, 14:59
Greg Baker
This MUST be left at least partially as a cutaway. Would be a crime to cover up all that intricate detail!
This MUST be left at least partially as a cutaway. Would be a crime to cover up all that intricate detail!
29 September, 16:21
Lorraine Lin
Haha Greg, will not cover it all. Actually the skin is also removable as I attached it to the fuselage with TAMIYA craft bond.
Haha Greg, will not cover it all. Actually the skin is also removable as I attached it to the fuselage with TAMIYA craft bond.
30 September, 05:31
Mr D
Excellent, clever and Educational, Exhibition worthy work.
Been a joy to follow 😃🦊
✌️👍👍👍
Excellent, clever and Educational, Exhibition worthy work.
Been a joy to follow 😃🦊
✌️👍👍👍
1 October, 18:13
Robert Podkoński
Awesome indeed! Fantastic models and photos. You're a master modeller, Lorraine!
Awesome indeed! Fantastic models and photos. You're a master modeller, Lorraine!
2 October, 07:31
Desert Marlin
Awesome work! The contrast with a traditional kit makes the reality very clear!
Awesome work! The contrast with a traditional kit makes the reality very clear!
2 October, 21:47
CaptGPF
Agree with doubtingmango - nothing less than incredible! I love the mounting and final presentation!
Agree with doubtingmango - nothing less than incredible! I love the mounting and final presentation!
3 October, 05:50
AzureStar
владеет этим предметом
владеет этим предметом
M1A1/M1A2 T-158 "Big Foot" Workable Track Link
Rye Field Model (RFM) 1:35
RM-5009 2017 Новая разработка 5 October, 04:08
Tim Powell
пометил этот товар как заказанный
пометил этот товар как заказанный
22.5" 2 Hole Trailer Wheels
Blacksheep Custom Designs 1:25
1 5 October, 03:53
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ru
35
35
/ru/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo